FAQ
# New Ticket Created by warrend@tek.com
# Please include the string: [perl #24512]
# in the subject line of all future correspondence about this issue.
# <URL: http://rt.perl.org/rt2/Ticket/Display.html?id=24512 >


This is a bug report for perl from warrend@tek.com,
generated with the help of perlbug 1.34 running under perl v5.8.1.


-----------------------------------------------------------------
[Please enter your report here]

Below is the output from the install of Compress::Bzip2. I have loaded
bzip2-1.0.2 which is the latest version. From what I understand there was a
change in library names in bzip at some point. All the entries in my library
start with BZ2_

It appears that Compress-Bzip2-1.00.tar.gz is still setup for the old names
and/or functions in the library.

Here is the error from below

symbol bzBuffToBuffCompress: referenced symbol not found at
/proj/wdt/gnu_sun5.8/perl-5.8.1/lib/5.8.1/sun4-solaris-thread-multi/DynaLoader.pm
line 229.


_____________________________________________________________________________


install Compress::Bzip2
Running install for module Compress::Bzip2
Running make for A/AZ/AZEMGI/Compress-Bzip2-1.00.tar.gz
Checksum for /proj/wdtold/warrend/cpan_perl-5.8.1_sun5.8/sources/authors/id/A/AZ/AZEMGI/Compress-Bzip2-1.00.tar.gz ok
Compress-Bzip2-1.00/
Compress-Bzip2-1.00/typemap
Compress-Bzip2-1.00/Bzip2.xs
Compress-Bzip2-1.00/configure
Compress-Bzip2-1.00/t/
Compress-Bzip2-1.00/t/test.t
Compress-Bzip2-1.00/MANIFEST
Compress-Bzip2-1.00/INSTALL
Compress-Bzip2-1.00/Makefile.PL
Compress-Bzip2-1.00/COPYING
Compress-Bzip2-1.00/NEWS
Compress-Bzip2-1.00/Bzip2.pm
Compress-Bzip2-1.00/README
Removing previously used /proj/wdtold/warrend/cpan_perl-5.8.1_sun5.8/build/Compress-Bzip2-1.00

CPAN.pm: Going to build A/AZ/AZEMGI/Compress-Bzip2-1.00.tar.gz

Checking if your kit is complete...
Looks good
Writing Makefile for Compress::Bzip2
cp Bzip2.pm blib/lib/Compress/Bzip2.pm
AutoSplitting blib/lib/Compress/Bzip2.pm (blib/lib/auto/Compress/Bzip2)
/proj/wdt/gnu_sun5.8/perl-5.8.1/bin/perl /proj/wdt/gnu_sun5.8/perl-5.8.1/lib/5.8.1/ExtUtils/xsubpp -typemap /proj/wdt/gnu_sun5.8/perl-5.8.1/lib/5.8.1/ExtUtils/typemap -typemap typemap Bzip2.xs > Bzip2.xsc && mv Bzip2.xsc Bzip2.c
gcc -c -D_REENTRANT -fno-strict-aliasing -I/proj/wdt/sun5.8/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O -DVERSION=\"1.00\" -DXS_VERSION=\"1.00\" -fPIC "-I/proj/wdt/gnu_sun5.8/perl-5.8.1/lib/5.8.1/sun4-solaris-thread-multi/CORE" Bzip2.c
Bzip2.xs: In function `boot_Compress__Bzip2':
Bzip2.xs:44: warning: comparison between pointer and integer
Running Mkbootstrap for Compress::Bzip2 ()
chmod 644 Bzip2.bs
rm -f blib/arch/auto/Compress/Bzip2/Bzip2.so
LD_RUN_PATH="/usr/lib" gcc -Wl,-E -G -G -z ignore -z lazyload -z combreloc Bzip2.o -o blib/arch/auto/Compress/Bzip2/Bzip2.so -lbz2
chmod 755 blib/arch/auto/Compress/Bzip2/Bzip2.so
cp Bzip2.bs blib/arch/auto/Compress/Bzip2/Bzip2.bs
chmod 644 blib/arch/auto/Compress/Bzip2/Bzip2.bs
Manifying blib/man3/Compress::Bzip2.3
/proj/wdt/sun5.8/bin/make -- OK
Running make test
Running Mkbootstrap for Compress::Bzip2 ()
chmod 644 Bzip2.bs
rm -f blib/arch/auto/Compress/Bzip2/Bzip2.so
LD_RUN_PATH="/usr/lib" gcc -Wl,-E -G -G -z ignore -z lazyload -z combreloc Bzip2.o -o blib/arch/auto/Compress/Bzip2/Bzip2.so -lbz2
chmod 755 blib/arch/auto/Compress/Bzip2/Bzip2.so
cp Bzip2.bs blib/arch/auto/Compress/Bzip2/Bzip2.bs
chmod 644 blib/arch/auto/Compress/Bzip2/Bzip2.bs
PERL_DL_NONLAZY=1 /proj/wdt/gnu_sun5.8/perl-5.8.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/test....Can't load '/proj/wdtold/warrend/cpan_perl-5.8.1_sun5.8/build/Compress-Bzip2-1.00/blib/arch/auto/Compress/Bzip2/Bzip2.so' for module Compress::Bzip2: ld.so.1: /proj/wdt/gnu_sun5.8/perl-5.8.1/bin/perl: fatal: relocation error: file /proj/wdtold/warrend/cpan_perl-5.8.1_sun5.8/build/Compress-Bzip2-1.00/blib/arch/auto/Compress/Bzip2/Bzip2.so: symbol bzBuffToBuffCompress: referenced symbol not found at /proj/wdt/gnu_sun5.8/perl-5.8.1/lib/5.8.1/sun4-solaris-thread-multi/DynaLoader.pm line 229.
at t/test.t line 8
Compilation failed in require at t/test.t line 8.
BEGIN failed--compilation aborted at t/test.t line 8.
t/test....dubious
Test returned status 255 (wstat 65280, 0xff00)
FAILED--1 test script could be run, alas--no output ever seen
make: *** [test_dynamic] Error 2
/proj/wdt/sun5.8/bin/make test -- NOT OK
Running make install
make test had returned bad status, won't install without force


[Please do not change anything below this line]
-----------------------------------------------------------------
---
Flags:
category=utilities
severity=low
---
Site configuration information for perl v5.8.1:

Configured by warrend at Tue Nov 11 11:06:44 PST 2003.

Summary of my perl5 (revision 5.0 version 8 subversion 1) configuration:
Platform:
osname=solaris, osvers=2.8, archname=sun4-solaris-thread-multi
uname='sunos rosewood 5.8 generic_108528-18 sun4u sparc sunw,ultra-5_10 solaris '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -I/proj/wdt/sun5.8/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O',
cppflags='-D_REENTRANT -fno-strict-aliasing -I/proj/wdt/sun5.8/include'
ccversion='', gccversion='3.2.3', gccosandvers='solaris2.8'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' '
libpth=/usr/lib /usr/ccs/lib /proj/wdt/sun5.8/lib
libs=-lsocket -lnsl -lgdbm -ldb -ldl -lm -lpthread -lc
perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc
libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -Wl,-E -z ignore -z lazyload -z combreloc -R /proj/wdt/gnu_sun5.8/perl-5.8.1/lib/5.8.1/sun4-solaris-thread-multi/CORE'
cccdlflags='-fPIC', lddlflags=' -Wl,-E -G -G -z ignore -z lazyload -z combreloc'

Locally applied patches:


---
@INC for perl v5.8.1:
/proj/wdt/gnu_sun5.8/perl-5.8.1/lib/5.8.1/sun4-solaris-thread-multi
/proj/wdt/gnu_sun5.8/perl-5.8.1/lib/5.8.1
/proj/wdt/gnu_sun5.8/perl-5.8.1/addons/lib/site_perl/5.8.1/sun4-solaris-thread-multi
/proj/wdt/gnu_sun5.8/perl-5.8.1/addons/lib/site_perl/5.8.1
/proj/wdt/gnu_sun5.8/perl-5.8.1/addons/lib/site_perl
.

---
Environment for perl v5.8.1:
HOME=/login/warrend
LANG=C
LANGUAGE (unset)
LD_LIBRARY_PATH=/tools/eda/ldv/bin:/proj/eda/ldv/ldv/cur/tools/inca/lib:/proj/eda/ldv/ldv/cur/tools/lib
LOGDIR (unset)
PATH=/stdapps/lsf/5.8/sparcv9/bin:/stdapps/lsf/local/bin:.:/proj/wdt/gnu_sun5.8/perl-5.8.1/bin:/proj/wdt/bin:/proj/wdt/sun5.8/bin:/proj/wdt/X.V11R6/sun5.8/bin:/login/warrend:/login/warrend/bin:/login/warrend/bin/sun5.8:/usr/ucb:/usr/openwin/bin:/usr/ccs/bin:/usr/bin:/etc:/usr/sbin:/proj/dpl/harry/bin:/tools/citrix6.0/wfica:/tools/eda/psd/15.0e/tools/pcb/bin:/tools/eda/psd/15.0e/tools/bin:/tools/eda/psd/15.0e/tools/dfII/bin:/tools/eda/psd/15.0e/tools/fet/bin:/tools/eda/psd/15.0e/tools/specctra/bin:/tools/eda/fetools/psd150/bin:/tools/eda/cadtools/psd150/bin:/tools/eda/ldv/LSF:/tools/eda/ldv/bin:/proj/eda/ldv/ldv/cur/tools/bin:/proj/eda/ldv/ldv/cur/tools/inca/bin:/proj/eda/ldv/lec/cur/bin:/proj/eda/ldv/debussy/cur/bin:/proj/eda/ldv/nLint/cur/bin:/proj/eda/common/vim/cur/bin:/stdapps/cms/bin
PERL_BADLANG (unset)
SHELL=/bin/tcsh

Search Discussions

  • Michael G Schwern at Nov 18, 2003 at 8:42 am

    On Mon, Nov 17, 2003 at 11:33:36PM -0000, warrend@tek.com (via RT) wrote:
    Below is the output from the install of Compress::Bzip2. I have loaded
    bzip2-1.0.2 which is the latest version. From what I understand there was a
    change in library names in bzip at some point. All the entries in my library
    start with BZ2_

    It appears that Compress-Bzip2-1.00.tar.gz is still setup for the old names
    and/or functions in the library.

    Here is the error from below

    symbol bzBuffToBuffCompress: referenced symbol not found at
    /proj/wdt/gnu_sun5.8/perl-5.8.1/lib/5.8.1/sun4-solaris-thread-multi/DynaLoader.pm
    line 229.
    Compress::Bzip2 is not maintained by perl5-porters but by Marco Carnut
    (kcarnut@cpan.org). Please contact him with your problem.

    Also the latest versoin of Compress::Bzip2 is 1.02. You might want to try
    that before emailing the author. 1.00 is four years old.
    http://search.cpan.org/dist/Compress-Bzip2/
    It appears the current version is not being indexed by CPAN.


    --
    Michael G Schwern schwern@pobox.com http://www.pobox.com/~schwern/
    Stupid am I? Stupid like a fox!
  • Warren L Dodge at Nov 21, 2003 at 6:50 pm
    They showed me how to get the proper module. I got it and there is some
    "make test" problems with it.

    Also the correct up to date module was not being got by using the CPAN
    command "install Compress::Bzip2"

    Seems like it should get the latest to avoid this confusion.
  • Robert Spier at Nov 21, 2003 at 6:56 pm

    At Fri, 21 Nov 2003 10:48:49 -0800 (PST), Warren L Dodge wrote:
    Also the correct up to date module was not being got by using the CPAN
    command "install Compress::Bzip2"
    Seems like it should get the latest to avoid this confusion.
    Yes. This is an issue with the CPAN indexer. I've reported it to the
    appropriate authorities.

    -R

Related Discussions

Discussion Navigation
viewthread | post
Discussion Overview
groupperl5-porters @
categoriesperl
postedNov 18, '03 at 12:15a
activeNov 21, '03 at 6:56p
posts4
users4
websiteperl.org

People

Translate

site design / logo © 2021 Grokbase