FAQ
Afternoon all! I have installed a standalone install of Perl and DBI/DBD::Oracle on my AIX 5.3 TL9 SP7 I have this working fine on two boxes but on one I keep getting the below error when I try a simple test connection. Has anyone seen this or know what may be wrong? I have been searching for an answer but have yet to turn anything up.

./foo
install_driver(Oracle) failed: Can't load '/product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3/aix-thread-multi-64all/auto/DBD/Oracle/Oracle.so' for module DBD::Oracle: rtld: 0712-001 Symbol OCIPing was referenced
from module /product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3/aix-thread-multi-64all/auto/DBD/Oracle/Oracle.so(), but a runtime definition
of the symbol was not found.
rtld: 0712-002 fatal error: exiting. at /product/cvc/perl5.12.3_64bit/lib/5.12.3/aix-thread-multi-64all/DynaLoader.pm line 200.
at (eval 3) line 3
Compilation failed in require at (eval 3) line 3.
Perhaps a required shared library or dll isn't installed where expected
at ./foo line 10

Perl configuration

/product/cvc/perl/bin/perl -V
Summary of my perl5 (revision 5 version 12 subversion 3) configuration:

Platform:
osname=aix, osvers=5.3.0.0, archname=aix-thread-multi-64all
uname='aix cvcpstg01 3 5 00c510fc4c00 '
config_args='-d -Dcc=gcc -Duseshrplib -Dusethreads -Duse64bitall -Dprefix=/product/cvc/perl5.12.3_64bit -s'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc -maix64', ccflags ='-D_THREAD_SAFE -D_ALL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT -fno-strict-aliasing -pipe -maix64 -DUSE_64_BIT_ALL',
optimize='-O',
cppflags='-D_THREAD_SAFE -D_ALL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT -fno-strict-aliasing -pipe'
ccversion='', gccversion='4.2.0', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc -maix64', ldflags =' -Wl,-brtl -Wl,-bdynamic -L/usr/local/lib -Wl,-b64'
libpth=/usr/local/lib /lib /usr/lib /usr/ccs/lib
libs=-lbind -lnsl -ldbm -ldl -lld -lm -lcrypt -lpthreads -lc
perllibs=-lbind -lnsl -ldl -lld -lm -lcrypt -lpthreads -lc
libc=/lib/libc.a, so=a, useshrplib=true, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_aix.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Xlinker -bE:/product/cvc/perl5.12.3_64bit/lib/5.12.3/aix-thread-multi-64all/CORE/perl.exp'
cccdlflags=' ', lddlflags=' -Wl,-b64 -Wl,-bhalt:4 -Wl,-G -Wl,-bI:$(PERL_INC)/perl.exp -Wl,-bE:$(BASEEXT).exp -Wl,-bnoentry -lpthreads -lc -lm -L/usr/local/lib'


Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API
Built under aix
Compiled at May 25 2011 15:17:56
@INC:
/product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3/aix-thread-multi-64all
/product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3
/product/cvc/perl5.12.3_64bit/lib/5.12.3/aix-thread-multi-64all
/product/cvc/perl5.12.3_64bit/lib/5.12.3

Thanks,
-Stephen

________________________________
This E-mail and any of its attachments may contain Time Warner Cable proprietary information, which is privileged, confidential, or subject to copyright belonging to Time Warner Cable. This E-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this E-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this E-mail is strictly prohibited and may be unlawful. If you have received this E-mail in error, please notify the sender immediately and permanently delete the original and any copy of this E-mail and any printout.

Search Discussions

  • Williams, Stephen at May 25, 2011 at 9:05 pm
    Sorry I did forget to include that I am working with 1.27. I checked the oci.def and OCIPing is in it. I am very perplexed as this same install worked fine on another node.

    From: John Scoles
    Sent: Wednesday, May 25, 2011 4:57 PM
    To: Williams, Stephen; dbi-usiners@perl.org
    Subject: RE: AIX 5.3 DBD::Oracle issues

    Like the error message says "OCIPing" is not present in you Oracle.so file.

    Can be cured a number of ways.

    1) check and see if OCIPing is in the OCI.def file of the version of DBD::Oracel you have installed.
    2) If it is not there add it and reinstall

    If the above does not work try a version of DBD::Oracle lower than 1.25 or a newer version like 1.27+

    You did not say which version of DBD::oracle you were using.

    cheers
    John
    From: stephen.williams@twcable.com
    To: dbi-usiners@perl.org Date: Wed, 25 May 2011 16:04:37 -0400
    Subject: AIX 5.3 DBD::Oracle issues

    Afternoon all! I have installed a standalone install of Perl and DBI/DBD::Oracle on my AIX 5.3 TL9 SP7 I have this working fine on two boxes but on one I keep getting the below error when I try a simple test connection. Has anyone seen this or know what may be wrong? I have been searching for an answer but have yet to turn anything up.

    ./foo
    install_driver(Oracle) failed: Can't load '/product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3/aix-thread-multi-64all/auto/DBD/Oracle/Oracle.so' for module DBD::Oracle: rtld: 0712-001 Symbol OCIPing was referenced
    from module /product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3/aix-thread-multi-64all/auto/DBD/Oracle/Oracle.so(), but a runtime definition
    of the symbol was not found.
    rtld: 0712-002 fatal error: exiting. at /product/cvc/perl5.12.3_64bit/lib/5.12.3/aix-thread-multi-64all/DynaLoader.pm line 200.
    at (eval 3) line 3
    Compilation failed in require at (eval 3) line 3.
    Perhaps a required shared library or dll isn't installed where expected
    at ./foo line 10

    Perl configuration

    /product/cvc/perl/bin/perl -V
    Summary of my perl5 (revision 5 version 12 subversion 3) configuration:

    Platform:
    osname=aix, osvers=5.3.0.0, archname=aix-thread-multi-64all
    uname='aix cvcpstg01 3 5 00c510fc4c00 '
    config_args='-d -Dcc=gcc -Duseshrplib -Dusethreads -Duse64bitall -Dprefix=/product/cvc/perl5.12.3_64bit -s'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
    Compiler:
    cc='gcc -maix64', ccflags ='-D_THREAD_SAFE -D_ALL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT -fno-strict-aliasing -pipe -maix64 -DUSE_64_BIT_ALL',
    optimize='-O',
    cppflags='-D_THREAD_SAFE -D_ALL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT -fno-strict-aliasing -pipe'
    ccversion='', gccversion='4.2.0', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=87654321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
    Linker and Libraries:
    ld='gcc -maix64', ldflags =' -Wl,-brtl -Wl,-bdynamic -L/usr/local/lib -Wl,-b64'
    libpth=/usr/local/lib /lib /usr/lib /usr/ccs/lib
    libs=-lbind -lnsl -ldbm -ldl -lld -lm -lcrypt -lpthreads -lc
    perllibs=-lbind -lnsl -ldl -lld -lm -lcrypt -lpthreads -lc
    libc=/lib/libc.a, so=a, useshrplib=true, libperl=libperl.a
    gnulibc_version=''
    Dynamic Linking:
    dlsrc=dl_aix.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Xlinker -bE:/product/cvc/perl5.12.3_64bit/lib/5.12.3/aix-thread-multi-64all/CORE/perl.exp'
    cccdlflags=' ', lddlflags=' -Wl,-b64 -Wl,-bhalt:4 -Wl,-G -Wl,-bI:$(PERL_INC)/perl.exp -Wl,-bE:$(BASEEXT).exp -Wl,-bnoentry -lpthreads -lc -lm -L/usr/local/lib'


    Characteristics of this binary (from libperl):
    Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
    PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
    USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
    USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API
    Built under aix
    Compiled at May 25 2011 15:17:56
    @INC:
    /product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3/aix-thread-multi-64all
    /product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3
    /product/cvc/perl5.12.3_64bit/lib/5.12.3/aix-thread-multi-64all
    /product/cvc/perl5.12.3_64bit/lib/5.12.3

    Thanks,
    -Stephen

    ________________________________
    This E-mail and any of its attachments may contain Time Warner Cable proprietary information, which is privileged, confidential, or subject to copyright belonging to Time Warner Cable. This E-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this E-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this E-mail is strictly prohibited and may be unlawful. If you have received this E-mail in error, please notify the sender immediately and permanently delete the original and any copy of this E-mail and any printout.
  • John Scoles at May 25, 2011 at 9:20 pm
    Well in that case bounce back to 1.25 which does not use OCIPing and you should be ok.

    Also check which oracle client versions are on both boxes Credits to Navy Beans that they are different.

    Cheers
    John
    From: stephen.williams@twcable.com
    To: dbi-users@perl.org
    Date: Wed, 25 May 2011 17:05:19 -0400
    Subject: RE: AIX 5.3 DBD::Oracle issues

    Sorry I did forget to include that I am working with 1.27. I checked the oci.def and OCIPing is in it. I am very perplexed as this same install worked fine on another node.

    From: John Scoles
    Sent: Wednesday, May 25, 2011 4:57 PM
    To: Williams, Stephen; dbi-usiners@perl.org
    Subject: RE: AIX 5.3 DBD::Oracle issues

    Like the error message says "OCIPing" is not present in you Oracle.so file.

    Can be cured a number of ways.

    1) check and see if OCIPing is in the OCI.def file of the version of DBD::Oracel you have installed.
    2) If it is not there add it and reinstall

    If the above does not work try a version of DBD::Oracle lower than 1.25 or a newer version like 1.27+

    You did not say which version of DBD::oracle you were using.

    cheers
    John
    From: stephen.williams@twcable.com
    To: dbi-usiners@perl.org > Date: Wed, 25 May 2011 16:04:37 -0400
    Subject: AIX 5.3 DBD::Oracle issues

    Afternoon all! I have installed a standalone install of Perl and DBI/DBD::Oracle on my AIX 5.3 TL9 SP7 I have this working fine on two boxes but on one I keep getting the below error when I try a simple test connection. Has anyone seen this or know what may be wrong? I have been searching for an answer but have yet to turn anything up.

    ./foo
    install_driver(Oracle) failed: Can't load '/product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3/aix-thread-multi-64all/auto/DBD/Oracle/Oracle.so' for module DBD::Oracle: rtld: 0712-001 Symbol OCIPing was referenced
    from module /product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3/aix-thread-multi-64all/auto/DBD/Oracle/Oracle.so(), but a runtime definition
    of the symbol was not found.
    rtld: 0712-002 fatal error: exiting. at /product/cvc/perl5.12.3_64bit/lib/5.12.3/aix-thread-multi-64all/DynaLoader.pm line 200.
    at (eval 3) line 3
    Compilation failed in require at (eval 3) line 3.
    Perhaps a required shared library or dll isn't installed where expected
    at ./foo line 10

    Perl configuration

    /product/cvc/perl/bin/perl -V
    Summary of my perl5 (revision 5 version 12 subversion 3) configuration:

    Platform:
    osname=aix, osvers=5.3.0.0, archname=aix-thread-multi-64all
    uname='aix cvcpstg01 3 5 00c510fc4c00 '
    config_args='-d -Dcc=gcc -Duseshrplib -Dusethreads -Duse64bitall -Dprefix=/product/cvc/perl5.12.3_64bit -s'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
    Compiler:
    cc='gcc -maix64', ccflags ='-D_THREAD_SAFE -D_ALL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT -fno-strict-aliasing -pipe -maix64 -DUSE_64_BIT_ALL',
    optimize='-O',
    cppflags='-D_THREAD_SAFE -D_ALL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT -fno-strict-aliasing -pipe'
    ccversion='', gccversion='4.2.0', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=87654321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
    Linker and Libraries:
    ld='gcc -maix64', ldflags =' -Wl,-brtl -Wl,-bdynamic -L/usr/local/lib -Wl,-b64'
    libpth=/usr/local/lib /lib /usr/lib /usr/ccs/lib
    libs=-lbind -lnsl -ldbm -ldl -lld -lm -lcrypt -lpthreads -lc
    perllibs=-lbind -lnsl -ldl -lld -lm -lcrypt -lpthreads -lc
    libc=/lib/libc.a, so=a, useshrplib=true, libperl=libperl.a
    gnulibc_version=''
    Dynamic Linking:
    dlsrc=dl_aix.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Xlinker -bE:/product/cvc/perl5.12.3_64bit/lib/5.12.3/aix-thread-multi-64all/CORE/perl.exp'
    cccdlflags=' ', lddlflags=' -Wl,-b64 -Wl,-bhalt:4 -Wl,-G -Wl,-bI:$(PERL_INC)/perl.exp -Wl,-bE:$(BASEEXT).exp -Wl,-bnoentry -lpthreads -lc -lm -L/usr/local/lib'


    Characteristics of this binary (from libperl):
    Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
    PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
    USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
    USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API
    Built under aix
    Compiled at May 25 2011 15:17:56
    @INC:
    /product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3/aix-thread-multi-64all
    /product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3
    /product/cvc/perl5.12.3_64bit/lib/5.12.3/aix-thread-multi-64all
    /product/cvc/perl5.12.3_64bit/lib/5.12.3

    Thanks,
    -Stephen

    ________________________________
    This E-mail and any of its attachments may contain Time Warner Cable proprietary information, which is privileged, confidential, or subject to copyright belonging to Time Warner Cable. This E-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this E-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this E-mail is strictly prohibited and may be unlawful. If you have received this E-mail in error, please notify the sender immediately and permanently delete the original and any copy of this E-mail and any printout.
  • Williams, Stephen at May 26, 2011 at 5:01 pm
    So I tried to bounce back to 1.25 and I still have issue. On a side note you were 100% correct on the working nodes the client is Oracle version 10.2.0.5 and on the non-working node it is at Oracle version 10.2.0.4. I have asked my DBA team to make the update to the 10.2.0.5 client in hopes this will clear up the issue. I will let you know if that doesn't fix it.

    Thanks again,
    -Stephen

    From: John Scoles
    Sent: Wednesday, May 25, 2011 5:20 PM
    To: Williams, Stephen; dbi-users@perl.org
    Subject: RE: AIX 5.3 DBD::Oracle issues

    Well in that case bounce back to 1.25 which does not use OCIPing and you should be ok.

    Also check which oracle client versions are on both boxes Credits to Navy Beans that they are different.

    Cheers
    John
    From: stephen.williams@twcable.com
    To: dbi-users@perl.org
    Date: Wed, 25 May 2011 17:05:19 -0400
    Subject: RE: AIX 5.3 DBD::Oracle issues

    Sorry I did forget to include that I am working with 1.27. I checked the oci.def and OCIPing is in it. I am very perplexed as this same install worked fine on another node.

    From: John Scoles
    Sent: Wednesday, May 25, 2011 4:57 PM
    To: Williams, Stephen; dbi-usiners@perl.org
    Subject: RE: AIX 5.3 DBD::Oracle issues

    Like the error message says "OCIPing" is not present in you Oracle.so file.

    Can be cured a number of ways.

    1) check and see if OCIPing is in the OCI.def file of the version of DBD::Oracel you have installed.
    2) If it is not there add it and reinstall

    If the above does not work try a version of DBD::Oracle lower than 1.25 or a newer version like 1.27+

    You did not say which version of DBD::oracle you were using.

    cheers
    John
    From: stephen.williams@twcable.com
    To: dbi-usiners@perl.org > Date: Wed, 25 May 2011 16:04:37 -0400
    Subject: AIX 5.3 DBD::Oracle issues

    Afternoon all! I have installed a standalone install of Perl and DBI/DBD::Oracle on my AIX 5.3 TL9 SP7 I have this working fine on two boxes but on one I keep getting the below error when I try a simple test connection. Has anyone seen this or know what may be wrong? I have been searching for an answer but have yet to turn anything up.

    ./foo
    install_driver(Oracle) failed: Can't load '/product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3/aix-thread-multi-64all/auto/DBD/Oracle/Oracle.so' for module DBD::Oracle: rtld: 0712-001 Symbol OCIPing was referenced
    from module /product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3/aix-thread-multi-64all/auto/DBD/Oracle/Oracle.so(), but a runtime definition
    of the symbol was not found.
    rtld: 0712-002 fatal error: exiting. at /product/cvc/perl5.12.3_64bit/lib/5.12.3/aix-thread-multi-64all/DynaLoader.pm line 200.
    at (eval 3) line 3
    Compilation failed in require at (eval 3) line 3.
    Perhaps a required shared library or dll isn't installed where expected
    at ./foo line 10

    Perl configuration

    /product/cvc/perl/bin/perl -V
    Summary of my perl5 (revision 5 version 12 subversion 3) configuration:

    Platform:
    osname=aix, osvers=5.3.0.0, archname=aix-thread-multi-64all
    uname='aix cvcpstg01 3 5 00c510fc4c00 '
    config_args='-d -Dcc=gcc -Duseshrplib -Dusethreads -Duse64bitall -Dprefix=/product/cvc/perl5.12.3_64bit -s'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
    Compiler:
    cc='gcc -maix64', ccflags ='-D_THREAD_SAFE -D_ALL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT -fno-strict-aliasing -pipe -maix64 -DUSE_64_BIT_ALL',
    optimize='-O',
    cppflags='-D_THREAD_SAFE -D_ALL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -DUSE_NATIVE_DLOPEN -DNEED_PTHREAD_INIT -fno-strict-aliasing -pipe'
    ccversion='', gccversion='4.2.0', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=87654321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
    Linker and Libraries:
    ld='gcc -maix64', ldflags =' -Wl,-brtl -Wl,-bdynamic -L/usr/local/lib -Wl,-b64'
    libpth=/usr/local/lib /lib /usr/lib /usr/ccs/lib
    libs=-lbind -lnsl -ldbm -ldl -lld -lm -lcrypt -lpthreads -lc
    perllibs=-lbind -lnsl -ldl -lld -lm -lcrypt -lpthreads -lc
    libc=/lib/libc.a, so=a, useshrplib=true, libperl=libperl.a
    gnulibc_version=''
    Dynamic Linking:
    dlsrc=dl_aix.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Xlinker -bE:/product/cvc/perl5.12.3_64bit/lib/5.12.3/aix-thread-multi-64all/CORE/perl.exp'
    cccdlflags=' ', lddlflags=' -Wl,-b64 -Wl,-bhalt:4 -Wl,-G -Wl,-bI:$(PERL_INC)/perl.exp -Wl,-bE:$(BASEEXT).exp -Wl,-bnoentry -lpthreads -lc -lm -L/usr/local/lib'


    Characteristics of this binary (from libperl):
    Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
    PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
    USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
    USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API
    Built under aix
    Compiled at May 25 2011 15:17:56
    @INC:
    /product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3/aix-thread-multi-64all
    /product/cvc/perl5.12.3_64bit/lib/site_perl/5.12.3
    /product/cvc/perl5.12.3_64bit/lib/5.12.3/aix-thread-multi-64all
    /product/cvc/perl5.12.3_64bit/lib/5.12.3

    Thanks,
    -Stephen

    ________________________________
    This E-mail and any of its attachments may contain Time Warner Cable proprietary information, which is privileged, confidential, or subject to copyright belonging to Time Warner Cable. This E-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this E-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this E-mail is strictly prohibited and may be unlawful. If you have received this E-mail in error, please notify the sender immediately and permanently delete the original and any copy of this E-mail and any printout.

Related Discussions

Discussion Navigation
viewthread | post
Discussion Overview
groupdbi-users @
categoriesperl
postedMay 25, '11 at 8:04p
activeMay 26, '11 at 5:01p
posts4
users2
websitedbi.perl.org

2 users in discussion

Williams, Stephen: 3 posts John Scoles: 1 post

People

Translate

site design / logo © 2022 Grokbase