FAQ
Hello,

when running the command "ip a" on a debian VM, I get this

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP qlen 1000
link/ether 00:50:56:99:73:35 brd ff:ff:ff:ff:ff:ff
inet 10.66.112.71/24 brd 10.66.112.255 scope global eth0
*inet6 fe80::250:56ff:fe99:7335/64* scope link
valid_lft forever preferred_lft forever

But with facter run as root I don't get any inet6 adress

facter | grep addr

ipaddress => 10.66.112.71
ipaddress_eth0 => 10.66.112.71
ipaddress_lo => 127.0.0.1
macaddress => 00:50:56:99:73:35
macaddress_eth0 => 00:50:56:99:73:35

I'm using facter v1.6.8

Could you please tell me how to get the IPv6 adresse using facter ?

Thanks in advance
Best regards,
Christophe

--
You received this message because you are subscribed to the Google Groups "Puppet Users" group.
To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/9Xpu5DvWYTEJ.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.

Search Discussions

  • R.I.Pienaar at May 17, 2012 at 1:39 pm

    ----- Original Message -----
    From: "Christophe L" <cl.subscription@gmail.com>
    To: puppet-users@googlegroups.com
    Sent: Thursday, May 17, 2012 2:36:49 PM
    Subject: [Puppet Users] Puppet facter 1.6.8 and inet6 addresses

    Hello,

    when running the command "ip a" on a debian VM, I get this

    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
    valid_lft forever preferred_lft forever
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
    state UP qlen 1000
    link/ether 00:50:56:99:73:35 brd ff:ff:ff:ff:ff:ff
    inet 10.66.112.71/24 brd 10.66.112.255 scope global eth0
    inet6 fe80::250:56ff:fe99:7335/64 scope link
    valid_lft forever preferred_lft forever

    But with facter run as root I don't get any inet6 adress

    facter | grep addr

    ipaddress => 10.66.112.71
    ipaddress_eth0 => 10.66.112.71
    ipaddress_lo => 127.0.0.1
    macaddress => 00:50:56:99:73:35
    macaddress_eth0 => 00:50:56:99:73:35

    I'm using facter v1.6.8

    Could you please tell me how to get the IPv6 adresse using facter ?
    Facter specifically do not report link local addresses.

    --
    You received this message because you are subscribed to the Google Groups "Puppet Users" group.
    To post to this group, send email to puppet-users@googlegroups.com.
    To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com.
    For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.

Related Discussions

Discussion Navigation
viewthread | post
Discussion Overview
grouppuppet-users @
categoriespuppet
postedMay 17, '12 at 1:36p
activeMay 17, '12 at 1:39p
posts2
users2
websitepuppetlabs.com

2 users in discussion

R.I.Pienaar: 1 post Christophe L: 1 post

People

Translate

site design / logo © 2022 Grokbase