Search Discussions

145 discussions - 523 posts

  • When I try to build the SA of the tutorial section 2.6 I get the error 'Failed to resolve artifacts'. I have created a camel SU and a JMS SU as described, using the archetypes and updating the ...
    Nov 17, 2008 at 10:59 pm
    Nov 21, 2008 at 7:59 am
  • Hello, I have a very simple process composed as follows: CXF-BC Consumer- My component The MEP is InOut. The problem is that the CXF send too many messages to my component. I used a listener to see ...
    Gianfranco BoccalonGianfranco Boccalon
    Nov 28, 2008 at 4:34 pm
    Dec 1, 2008 at 6:46 pm
  • Hi all, I'm repeating some test i made a year ago with servicemix-cxf-bc. The cxf-bc-consumer seem s to work quite well, but on the other side i'm having a lot of problems when using cxf-bc-provider ...
    Andrea ZoppelloAndrea Zoppello
    Nov 26, 2008 at 6:04 pm
    Dec 1, 2008 at 8:42 am
  • Did you make sure you have the needed osgi import header for the missing package. -- Cheers, Guillaume Nodet ------------------------ Blog: http://gnodet.blogspot.com/ ------------------------ Open ...
    Guillaume NodetGuillaume Nodet
    Nov 10, 2008 at 11:12 am
    Nov 21, 2008 at 9:32 am
  • Hi, I am a servicemix beginner. I have a decent idea about the various components, ie SE, BC, SA, SU etc. I created a servicemix-bean SU and SA in eclipse with maven. How do I invoke this endpoint ...
    Nov 12, 2008 at 4:18 am
    Nov 13, 2008 at 9:04 am
  • I was trying to use the JDBC component as mentioned in one of the forums http://markmail.org/message/s3ia4ehq2rnaimvx But I get the following error. Does servicemix has a JDBC component, I couldnot ...
    Nov 6, 2008 at 4:28 pm
    Nov 10, 2008 at 8:42 am
  • Is there a way to setup SM CXF to use the message of an underlying exception when SOAP Faults aren't explicitly defined? <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" ...
    Nov 14, 2008 at 8:06 pm
    Jan 8, 2009 at 11:42 pm
  • I try to use the Advanced JDBC Component by Spargic in Servicemix. When I deploy the Component I get the following error: < loc-message ...
    Berndt SevcikBerndt Sevcik
    Nov 17, 2008 at 11:59 am
    Dec 5, 2008 at 4:05 pm
  • Hi, we see a very strange behaviour in our ServiceMix configuration. We process a few thousand messages and then after some time ServiceMix comes to a complete halt. The thread dump shows something ...
    Fabian CrabusFabian Crabus
    Nov 21, 2008 at 10:39 am
    Dec 1, 2008 at 9:36 am
  • Hi all, using ServiceMix 4.0-M1 (with the SMX Kernel 1.0-M2 embedded), I have created a CXF NMR OSGi bundle. In my bundle beans.xml, I have : <?xml version="1.0" encoding="UTF-8"? <beans ...
    Jean-Baptiste OnofréJean-Baptiste Onofré
    Nov 4, 2008 at 7:54 am
    Nov 4, 2008 at 2:55 pm
  • Hi all, On ServiceMix 3.3, I have two SUs : - the first one is a CXF-SE component (using a bean) - the second one is a HTTP component in front of the CXF-SE one In the xbean.xml of the CXF-SE ...
    Jean-Baptiste OnofréJean-Baptiste Onofré
    Nov 3, 2008 at 1:46 pm
    Nov 4, 2008 at 7:26 am
  • Hi, I've try to debug servicemix-cxf-bc2008.01-component, attaching the code i've found here: https://svn.apache.org/repos/asf/servicemix/components/components-pom/trunk but it seems that the code ...
    Andrea ZoppelloAndrea Zoppello
    Nov 27, 2008 at 1:12 pm
    May 18, 2011 at 3:22 am
  • Hi everyone, We are using the servicemix-saxon Service Unit in our development. The stylesheet comes from the file system, therefore the xbean.xml points to a file:/// location. When we make changes ...
    Nov 25, 2008 at 10:45 am
    Nov 25, 2008 at 6:26 pm
  • I implemented POP3 polling and SMTP sending service units. At the first polling, after retrieving (POP3) a new e-mail and replying back (SMTP) to the e-mail, polling stopped. What might be the ...
    Nov 19, 2008 at 5:28 pm
    Nov 20, 2008 at 8:12 pm
  • I'm getting the following error trying to build a service assembly with two cxf binding components (consumer/provider) under servicemix 3.3: Missing: ---------- 1) ...
    Nov 18, 2008 at 8:08 pm
    Nov 19, 2008 at 11:51 pm
  • Hi all !! At first i'm a newbie thus forgive my misssteps; currently i'm trying to test an application based on 3 jbi containers (clustering) the first one hold a file poller; the second one an eip ...
    Nov 18, 2008 at 2:58 pm
    Nov 19, 2008 at 3:29 pm
  • I'm running into the following problem when trying to build smx4 with latest checkout: [INFO] Failed to resolve artifact. GroupId: org.apache.servicemix.bundles ArtifactId ...
    Nov 2, 2008 at 5:35 am
    Nov 5, 2008 at 4:15 am
  • Is there any fix for this??? Andrea
    Andrea ZoppelloAndrea Zoppello
    Nov 27, 2008 at 1:36 pm
    Dec 2, 2008 at 5:34 am
  • Hello ServiceMix-community! I implemented a custom LockManager-class that implements the LockManager interface, according to this guide: http://fusesource.com/docs/esb/3.3/file/ESBFilePollerLock.html ...
    Nov 25, 2008 at 12:53 pm
    Nov 26, 2008 at 2:05 pm
  • Hi All, We're evaluating to port our open source project, to support servicemix 4. I think some things in servicemix 4 are great ( osgi support ), enhancemetnt to servicemix-bean and so on. BTW i ...
    Andrea ZoppelloAndrea Zoppello
    Nov 18, 2008 at 11:01 am
    Nov 19, 2008 at 10:06 am
  • I am getting following errors when compiling servicemix example. (I have my log4j.properties added to classpath but still getting the errors.) Could anyone help with fixing this errors? ERROR ...
    Nov 16, 2008 at 3:02 am
    Nov 17, 2008 at 4:09 pm
  • Hello there. I'm fresh to servicemix. Is there any way to poll message and push message to rabbitMQ broker by servicemix? What servicemix component I should use? Cheers, MethoD -- View this message ...
    Nov 26, 2008 at 5:28 am
    Dec 13, 2008 at 12:30 pm
  • Since I made it work ultimately, I want to share how I did it. 1. From ServiceMix shell: `feature install web` 2. From ServiceMix shell: `feature install cxf-osgi` 3. CXF extension must be correct in ...
    Hendy IrawanHendy Irawan
    Nov 30, 2008 at 6:46 pm
    Dec 7, 2008 at 2:28 pm
  • I've the following stack trace when the CxfProvider when the soap response is received by CxfBcProvider: INFO: Interceptor has thrown exception, unwinding now org.w3c.dom.DOMException ...
    Andrea ZoppelloAndrea Zoppello
    Nov 27, 2008 at 12:54 pm
    Nov 28, 2008 at 12:07 am
  • I am getting XFire soap error: "Not enough message parts were received for the operation". Could anyone help with this please? I added a second operation/method to wsdl-first example. I made changes ...
    Nov 22, 2008 at 1:48 am
    Nov 23, 2008 at 9:48 pm
  • I am going through an exercise in the ServiceMix tutorial (section 2.6. Beginner - Exercise http://servicemix.apache.org/26-beginner-exercise.html) which add 2 SU (eip and jms based) to existing ...
    Nov 18, 2008 at 7:23 pm
    Nov 18, 2008 at 7:58 pm
  • Hello, I have a question about SOAP processing (specifically related to the SOAP header). I've been using ServiceMix lightly for over a year now and my experience has been that SOAP processing ...
    Jeff PetersonJeff Peterson
    Nov 15, 2008 at 12:18 am
    Nov 17, 2008 at 6:01 pm
  • Just installed ServiceMix 3.2.1 and going through the tutorial (doing all the examples as a good student...). But I have problems in the Tutorial section 1.5, JMX connections... When I start the ...
    Nov 16, 2008 at 10:05 am
    Nov 17, 2008 at 10:56 am
  • Hi All, I am trying to configure HA on servicemix using oracle DB. I already gone through this page http://servicemix.apache.org/clustering.html and I am going with JDBC Master-Slave where I am using ...
    Sanjay JainSanjay Jain
    Nov 10, 2008 at 4:05 pm
    Nov 13, 2008 at 7:57 pm
  • Hi, I am sending JAVA Object to ActiveMQ JMS queue after converting it to the ByteArrayOutputStream and then textmessage. I am using eip-content-based-router for routing message to another queue. I m ...
    Nov 13, 2008 at 8:17 am
    Nov 13, 2008 at 9:48 am
  • I downloaded ServiceMix 3.3 and ran it but i cannot find ServiceMix console. How can i use it? Do i need something additional? Tomasz Prus
    Tomasz PrusTomasz Prus
    Nov 12, 2008 at 8:45 am
    Nov 12, 2008 at 11:02 pm
  • How can I write non-persistent messages to a queue on ActiveMQ 5.1? Also, I would like to set the expiration property on the message. When messages are showing up in the queue in ActiveMQ, they show ...
    Nov 10, 2008 at 4:45 pm
    Nov 12, 2008 at 11:21 am
  • Hello everybody, I have a problem with removing unused messages from ActiveMQ queue. The problem is that when I peek messages which resides in ActiveMQ queue in jconsole, I see that their ...
    Razu programistaRazu programista
    Nov 26, 2008 at 1:38 pm
    Nov 27, 2008 at 9:23 am
  • Hi all, As i know from smx 3.3/4 the plain old ( and very good ) scripting component, will be replaced by servicemix-scripting. I know it's better because it's standard and so on, but i've still some ...
    Andrea ZoppelloAndrea Zoppello
    Nov 14, 2008 at 3:39 pm
    Nov 14, 2008 at 4:25 pm
  • Hello, Can we use only one method, either convertMailToJBI or convertJBIToMail? I was trying to send an e-mail (convertJBIToMail) after retrieving an e-mail (convertMailToJBI) using POP3 and had the ...
    Nov 6, 2008 at 5:33 pm
    Nov 11, 2008 at 6:54 pm
  • Hi all, using ServiceMix 4.0-M1, most of the time (not always), when I start ServiceMix using the servicemix script in the bin directory, it takes 100% of my CPU and do nothing while I haven't kill ...
    Jean-Baptiste OnofréJean-Baptiste Onofré
    Nov 3, 2008 at 4:59 pm
    Nov 3, 2008 at 8:26 pm
  • Hi All, I am trying to call an External Web Service from servicemix. I am injecting the org.apache.cxf.jaxws.JaxWsProxyFactoryBean as the client factory and method create in to my CXF SE service unit ...
    Martin FeeneyMartin Feeney
    Nov 25, 2008 at 10:07 am
    Apr 2, 2009 at 1:56 am
  • Is it possible to have servicemix-cxf-bc automatically insert it's own hostname/IP address into the <soap:address location="..." / element of the WSDL that ServiceMix serves? I used the following in ...
    Nov 25, 2008 at 5:35 pm
    Feb 9, 2009 at 10:44 pm
  • Hi, I only used servicemix for two weeks, so I'm not familiar with all the concepts yet. Please be tolerant... I'm trying to route a message from an http su to a jms queue inside servicemix through a ...
    florian Mflorian M
    Nov 27, 2008 at 4:58 pm
    Dec 1, 2008 at 4:02 pm
  • Hi all, I use ServiceMix 3.3 (with 2008.01 components). I have a CXF-SE component using a POJO. The xbean.xml of this component is the following : <beans ...
    Jean-Baptiste OnofréJean-Baptiste Onofré
    Nov 27, 2008 at 4:11 pm
    Nov 27, 2008 at 5:01 pm
  • Hello. I have a problem. I have one SE for the ServiceMix 3.2.2 and I wont to call another service from the same SM. I found next code: /InOnly exchange = client.createInOnlyExchange() ...
    Nov 24, 2008 at 4:52 pm
    Nov 26, 2008 at 12:31 pm
  • Hi !! I'm testing the connection between 2 servicemix instances one running on the host 1 and the second on the host 2; is it possible to connect them without using a container for each one as on the ...
    Nov 21, 2008 at 11:04 am
    Nov 24, 2008 at 12:49 pm
  • Hello All, I have been just playing with example that was put here: http://servicemix.apache.org/SMX4/cxf-examples.html And it is working, however thing interests me. How should I configure SMIX or ...
    Nov 19, 2008 at 8:03 pm
    Nov 21, 2008 at 2:16 pm
  • Reading the JBI and the service mix documentation there is a lot of talk about MEPs and service definitions in WSDL. Maybe this has put me on a wrong track, because when I first wanted to create a ...
    Nov 19, 2008 at 10:58 pm
    Nov 20, 2008 at 11:13 am
  • I get the following stack trace from ServcieMix 3.3. The error seems to be coming from doShutdown(), however I can not find a version of this function in the repository. Can someone give me an idea ...
    Nov 15, 2008 at 3:48 am
    Nov 17, 2008 at 9:17 pm
  • Hi all, I need to get the source of "servicemix components" referred to the 3.3 release. As i know the src of the components is no more distributed, and i must get it from svn repo. Is there a tag ...
    Andrea ZoppelloAndrea Zoppello
    Nov 14, 2008 at 3:03 pm
    Nov 14, 2008 at 9:43 pm
  • Hi, I am new to Servicemix ESB. I have installed servicemix on one machine. I am sending a message from a client to Servicemix. If the client is on the same machine as the servicemix then the message ...
    Praveen shindePraveen shinde
    Nov 14, 2008 at 4:17 am
    Nov 14, 2008 at 8:14 am
  • Hi, I am getting ClassNotFoundException: org.apache.servicemix.components.vfs.FilePoller on ServiceMix 3.3 My xbean configuration has the following <sm:activationSpec componentName="filePoller" ...
    Bhaskar DabbigodlaBhaskar Dabbigodla
    Nov 13, 2008 at 5:36 pm
    Nov 14, 2008 at 6:46 am
  • Hi all, I'm using ServiceMix 3.2.2. I want to configure the Servicemix to re-send the messages, so that even if the "Message-Receiver System" is down for a while, it can receive the re-sent message ...
    Nov 10, 2008 at 1:35 pm
    Nov 13, 2008 at 12:18 pm
  • I did some performance testing between Apache Ode and Sun-Bpel engine. See http://www.nabble.com/Apache-ODE-performance-compare-to-Sun--BPEL-Engine-Performance-to20440881.html ...
    Nov 12, 2008 at 4:16 pm
    Nov 12, 2008 at 9:03 pm
Group Navigation
period‹ prev | Nov 2008 | next ›
Group Overview
groupusers @

97 users for November 2008

Guillaume Nodet: 45 posts Jean-Baptiste Onofré: 40 posts Freeman Fang: 34 posts Andrea Zoppello: 27 posts Lars Heinemann: 23 posts Ashwin Karpe: 20 posts Gert Vanthienen: 19 posts Adrian Trenaman: 14 posts Drone42: 14 posts Tomasz Prus: 14 posts Subh: 12 posts Jeff Peterson: 11 posts Manish_goyal: 11 posts Raulvk.soa: 11 posts SY-1: 11 posts Asilchenko: 10 posts Jwy923: 10 posts Navigator09: 9 posts ObjectOrange: 9 posts Servicer-mixer: 8 posts
show more