Search Discussions
-
Hi, We had develop an application for the RabbitMQ both the publisher as well as subscriber using the fanout exchange, which is working fine. But now we want to implement the ssl with our publisher ...
Abhijit
Aug 8, 2011 at 2:09 pm
Aug 14, 2011 at 9:26 pm -
The RabbitMQ team is pleased to announce the release of RabbitMQ 2.6.0. The highlight of this release is the introduction of active-active HA, with queues getting replicated across nodes in a ...
Tim Fox
Aug 31, 2011 at 1:23 pm
Sep 3, 2011 at 6:41 am -
Hello, I am doing some testing with RabbitMQ and Stomp. I am using stomp-benchmark to run the scenario attached to this email. It is producing small messages at highest rate possible on a topic on a ...
Massimo Paladin
Aug 6, 2011 at 12:11 pm
Sep 18, 2011 at 12:56 pm -
I've tried to send a message that contained a message-id to RabbitMQ's STOMP interface and it got rejected with an error: Invalid message-id. This (i.e. client supplied message-id) can happen when ...
Lionel Cons
Aug 22, 2011 at 9:15 am
Aug 22, 2011 at 12:57 pm -
Hi, We're building a system that uses RabbitMQ for messaging, and one of the targets is an embedded PC with ARM7 processor. Have anyone tried to compile RabbitMQ for ARM targets? If you have any ...
Alex P
Aug 17, 2011 at 8:13 am
Jan 18, 2014 at 12:31 am -
Hi, I hope you can help. I am investigating the feasibility of deploying RabbitMQ in our application. Our chosen RabbitMQ deployment requires lots of queues. To maintain fairness across our ...
Iain Hull
Aug 31, 2011 at 9:46 am
Sep 1, 2011 at 1:10 pm -
Hi everyone... I?ve been performing a load/soak test on RabbitMQ before we promote our configuration into production, and have run into a little bit of a snag. The Management Plugin seems to gather ...
Rene Parra
Aug 22, 2011 at 5:31 pm
Aug 25, 2011 at 5:27 pm -
Hi All, Wondering if you can all help me from going bald as I am pulling out my hair, trying to get RabbitMQ working. I install it and It comes up with: Setting up rabbitmq-server (2.5.1-1) ... ...
TreforT
Aug 8, 2011 at 3:41 pm
Aug 17, 2011 at 1:08 pm -
A lot of clients (a thousand or more) were rapidly publishing 1kb messages to a queue, and then rabbitmq crashed. In fact I had a cluster of 4 rabbits, and 2 of them crashed as a result. The ...
Eugene Kirpichov
Aug 12, 2011 at 1:23 am
Aug 12, 2011 at 4:02 pm -
Hi, We are experiencing an issue with version 2.2.0 which causes to RabbitMQ to not deliver messages to a consumer. The consumer is connected to RabbitMQ and performs a create queue/ exchange/binding ...
Alfonso Pantoja
Aug 17, 2011 at 10:57 am
Aug 18, 2011 at 4:56 pm -
Hi, I decided that I've asked too many hard or confusing questions lately, and decided to contribute instead :) So here's what I learnt about making rabbitmq fast, or at least avoiding making it ...
Eugene Kirpichov
Aug 12, 2011 at 4:47 am
Aug 15, 2011 at 4:01 pm -
Hi, We have been running a single RabbitMQ instance for 6 months now (RabbitMQ 2.2). Off late we observed RabbitMQ was consuming 11G of Memory when the entire queue-size was about 7MB. We decided to ...
Abhishek K
Aug 2, 2011 at 2:00 pm
Aug 4, 2011 at 12:20 pm -
Hi I am working with RabbitMQ with the SSL encryption enabled and everything works fine. I implemented a client and server authentication but if a client send a revoked certificate the server accept ...
Andrea Rosa
Aug 2, 2011 at 11:08 am
Oct 8, 2013 at 11:27 am -
Hi, I got this error when trying to install the latest RabbitMQ version through MacPorts. I have added RabbitMQ repo in my sources.conf and did a port sync before running port install. Error: Unable ...
Raymond Murthi
Aug 31, 2011 at 4:41 pm
Sep 2, 2011 at 11:35 am -
I'm trying to use client-side acknowledgment in STOMP and it seems that RabbitMQ does not follow the STOMP 1.1 spec. Here is what I tried: - p: send two messages to a queue - c: subscribe with ...
Lionel Cons
Aug 22, 2011 at 9:29 am
Aug 22, 2011 at 12:46 pm -
Hi, we are running RabbitMQ v. 2.2.0 on Ubuntu and yesterday we experienced a problem in our production server after a connectivity issue that caused the consumers couldn't access to Rabbit. After ...
Alfonso Pantoja
Aug 2, 2011 at 9:06 am
Aug 5, 2011 at 9:18 pm -
Hello, RabbitMQ RPM requires erlang which is provided by a lot of sub-packages. I wonder if rabbit really needs all those sub-packages, did someone already spend some time shrinking down the required ...
Massimo Paladin
Aug 4, 2011 at 11:18 am
Aug 5, 2011 at 10:04 am -
Hi everybody, I wondered if somebody might be able to clarify some behaviour for me as I am getting confused about whether the scenario I am experiencing is due to a lack of understanding of how ...
Andrew
Aug 1, 2011 at 4:37 pm
Oct 11, 2011 at 8:27 am -
Hi, we would like to organize a one-day meeting in Italy about RabbitMQ. There is no agenda yet, although it would ideally entail real-life experiences and usage patterns, as well as anything ...
Simone Busoli
Aug 17, 2011 at 6:12 pm
Sep 12, 2011 at 6:47 pm -
I am using Celery with RabbitMQ. Lately, I have noticed that a large number of temporary queues are getting made. So, I experimented and found that when a task fails (that is a tasks raises an ...
SiddharthSaha
Aug 22, 2011 at 7:14 am
Aug 22, 2011 at 5:47 pm -
We've put two new rabbit 2.5 hosts into production at the same time as we performed some other major upgrades to our software on 9 August. As designed, our messages queued up in rabbit, and we slowly ...
Aaron Westendorf
Aug 12, 2011 at 6:27 pm
Aug 16, 2011 at 1:50 pm -
I sent with STOMP a test message with a binary body to a RabbitMQ 2.5.1 broker and got back a garbaged text body. More precisely, the sent message did not contain any content-type header but the ...
Lionel Cons
Aug 9, 2011 at 12:08 pm
Aug 10, 2011 at 8:13 am -
Hi I kept get error message while connect to rabbitmq server using rabbitmq-erlang-client library. Anyone can help, thanks. Erlang R14B03 (erts-5.8.4) [source] [64-bit] [smp:24:24] [rq:24] ...
Fisher Yu
Aug 2, 2011 at 1:43 pm
Aug 6, 2011 at 1:35 pm -
Hi list, I'm facing an issue with my rabittmq cluster where a queue disappears from a node. I have 2 nodes in a cluster working in "disk mode". Node1 - only consumes messages from the queue. Node2 - ...
Cezary Siwek
Aug 25, 2011 at 12:09 pm
Sep 8, 2011 at 12:23 pm -
Hello, I just started playing around with rabbitmq and ran into some issue with auto-deleting large number of queues. I setup a rabbitMQ server (2.5.1) on a box with 4 cores, 8GB, and running Linux. ...
Michael Chiang
Aug 27, 2011 at 8:08 am
Aug 29, 2011 at 5:32 am -
Hey guys, I'm having problems running RabbitMQ. It used to run fine on my machine (Centos 5.5), but now it won't start. I have tried uninstalling and reinstalling (through yum), but the error remains ...
Craig Blaszczyk
Aug 25, 2011 at 11:16 am
Aug 25, 2011 at 3:22 pm -
I am new to rabbitMQ and I quite not understand completely the whole thing. I am trying to use the messaging technology to implement the "load balancing" of my webserver, and with this I mean to ...
Almudena
Aug 22, 2011 at 9:28 am
Aug 23, 2011 at 9:08 am -
Hello, I set up rabbitmq on amazon EC2 instance. env hostname: gives me: ip-10-202-255-xxx rabbitmq node : rabbit at ip-10-202-255-xxx However I want to connect to rabbitmq outside amazon host by ...
Andrei Varanovich
Aug 17, 2011 at 11:21 am
Aug 22, 2011 at 3:47 pm -
The Manning RabbitMQ In Action book states: "Now if what we really need is absolute "high availability" with no possibilities of message loss we can build a "warren" using two standalone RabbitMQ ...
Joe Van Dyk
Aug 9, 2011 at 4:17 pm
Aug 9, 2011 at 10:12 pm -
Hi, I have a need of introspecting some queues (very basic form of querying: list all messages in the queue) and draining with basic.get + requeuing is not an option for various reasons. Number of ...
Michael Klishin
Aug 1, 2011 at 12:19 pm
Aug 2, 2011 at 12:27 pm -
It seems that RabbitMQ does not handle the "expires" STOMP header. Although this is not in the STOMP spec, it's commonly used in JMS-compliant brokers to handle expiration. Is there any plan to ...
Lionel Cons
Aug 22, 2011 at 9:07 am
Oct 28, 2011 at 11:30 am -
Is there a recommended XML spec file to use with txAMQP and RabbitMQ? The spec files that I have found so far either don't work with RabbitMQ or don't contain definitions for some of the newer ...
Jeffrey Ollie
Aug 19, 2011 at 5:50 pm
Aug 23, 2011 at 10:19 am -
I'm getting the following error from code that used to work without error until I did an "apt-get upgrade" today. This is an Ubuntu 11.04 system running Python 2.7 and Pika 0.95. Any clues what's ...
Matt Pietrek
Aug 15, 2011 at 11:36 pm
Aug 22, 2011 at 3:57 pm -
It seems that RabbitMQ log rotation happens in two different places: - in the rabbitmq-server script, using cat and RABBITMQ_BACKUP_EXTENSION - in the init script, using rabbitmqctl and ROTATE_SUFFIX ...
Lionel Cons
Aug 5, 2011 at 10:19 am
Aug 10, 2011 at 6:25 am -
Hi, I'd like to know if there is a way to get the number of consumers that are currently bound to a queue. I am using the .NET client. Greets Andreas -- View this message in context: ...
Andreas Lackner
Aug 9, 2011 at 1:11 pm
Aug 9, 2011 at 2:30 pm -
I want to create a cluster of RabbitMQ on EC2. I have created an AMI of Ubantu and install the rabbitmq-server-2.3.1 on it. I have also installed the management plugins for GUI. For cluster purpose I ...
News Aanad
Aug 5, 2011 at 10:11 am
Aug 8, 2011 at 10:57 am -
RabbitMQ no longer responds to queries and /etc/init.d/rabbitmq-server stop hung. RabbitMQ version is 2.5.1. SUSE Linux Enterprise Server 11 SP1. uname -a Linux iac-pgis 2.6.32.36-0.5-default #1 SMP ...
Matti Linnanvuori
Aug 29, 2011 at 6:57 am
Aug 31, 2011 at 1:11 pm -
Hi, We've used RabbitMQ 2.3.x and 2.4.x in production for a while and haven't had too much trouble. Last week we set up a new cluster with 2.5.1 that will be used for the next version of our system. ...
Theo
Aug 28, 2011 at 10:23 am
Aug 31, 2011 at 9:50 am -
Hi, I've been working with various python modules (carrot, kombu.. all using the python amqplib underneath) and I have spotted what I think may be a bug with rabbit. I'd love to hear if anyone else ...
Chris Behrens
Aug 25, 2011 at 4:56 pm
Aug 26, 2011 at 9:32 am -
New to rabbitmq, so far I'm loving it. ANy pointers you can give me ? Thanks! An HTML attachment was scrubbed... URL: ...
Jonathan Hursey
Aug 21, 2011 at 11:43 am
Aug 21, 2011 at 2:08 pm -
Hi I have been playing with rabbitmq and am thinking through some common scenarios I think I will need to deal with, I was wondering if anyone would be able to take the time to read my thoughts and ...
Pete Kelly
Aug 16, 2011 at 7:58 pm
Aug 17, 2011 at 6:40 pm -
Hi We are facing we a strange issue in an publisher/subscriber scenario, we have some queues with messages ready but not "consumed" by consumer. The consumer seems to be up and running, the exchange ...
Rosa, Andrea
Aug 12, 2011 at 9:51 am
Aug 12, 2011 at 5:45 pm -
Hi, I am looking at implementing my own rabbit_msg_store_index that would use Redis (probably with JSON serialization of Erlang data types, I need basic queue inspection capabilities and don't care ...
Michael Klishin
Aug 3, 2011 at 2:43 pm
Aug 10, 2011 at 6:48 pm -
I have a little announcement to make. As I have been using RabbitMQ for over 2 years now, I kept explaining AMQP Model concepts, featurse & why they exist to numerous people. After a while it became ...
Michael Klishin
Aug 2, 2011 at 9:26 am
Aug 2, 2011 at 9:05 pm -
Ran into an unintended snag with JSON Channel RPC with regard to a mochiweb limitation. Mochiweb has a hardcoded constant for the maximum body size for a request at 1MB: ...
Gavin M. Roy
Aug 19, 2011 at 8:20 pm
Sep 23, 2011 at 11:44 am -
(I'm new to Rabbit, so please forgive me if this is a dumb question) I followed the instructions at http://www.rabbitmq.com/pacemaker.html to build a two-node HA environment. My nodes are RabbitMQ ...
John Jeffers
Aug 29, 2011 at 8:31 pm
Sep 1, 2011 at 6:11 pm -
Im getting the following error related to the management plugin, its causing a nagios alert to fire, so I need to do something about it. These are the versions Im running: CentOS release 5.6 - ...
Conor Glynn
Aug 31, 2011 at 12:19 pm
Sep 1, 2011 at 8:28 am -
I'm hoping someone can help he with my RabbitMQ problem; I've got some code based on the tutorial #6 code, and it's not doing what I'm expecting. I tried to create a shell where I can send strings to ...
Doug Gorley
Aug 24, 2011 at 1:49 am
Aug 24, 2011 at 1:32 pm -
I have downloaded rabbitmq--server-generic-unix-2.5.1.tar (generic linux tar) and am trying to run it on RHL 2.6.18-238.12.1.el5. I have built erlang 5.8.4 (R14B03) and when I run the server I get ...
Interglossa
Aug 22, 2011 at 9:12 pm
Aug 23, 2011 at 3:07 pm -
Hi In my application we are using publisher and subscriber (consumer) pattern but we have an odd problem with some consumers. In the normal scenario we have publishers sending messages on a topic ...
Rosa, Andrea
Aug 19, 2011 at 10:27 am
Aug 23, 2011 at 10:17 am
Group Overview
| group | rabbitmq-discuss |
| categories | rabbitmq |
| discussions | 108 |
| posts | 545 |
| users | 113 |
| website | rabbitmq.com |
| irc | #rabbitmq |
113 users for August 2011
Archives
- July 2014 (264)
- June 2014 (596)
- May 2014 (647)
- April 2014 (761)
- March 2014 (614)
- February 2014 (730)
- January 2014 (651)
- December 2013 (571)
- November 2013 (653)
- October 2013 (828)
- September 2013 (763)
- August 2013 (659)
- July 2013 (800)
- June 2013 (549)
- May 2013 (790)
- April 2013 (483)
- March 2013 (552)
- February 2013 (389)
- January 2013 (531)
- December 2012 (465)
- November 2012 (718)
- October 2012 (715)
- September 2012 (516)
- August 2012 (574)
- July 2012 (659)
- June 2012 (515)
- May 2012 (588)
- April 2012 (502)
- March 2012 (813)
- February 2012 (636)
- January 2012 (732)
- December 2011 (408)
- November 2011 (737)
- October 2011 (582)
- September 2011 (520)
- August 2011 (545)
- July 2011 (674)
- June 2011 (500)
- May 2011 (447)
- April 2011 (410)
- March 2011 (672)
- February 2011 (537)
- January 2011 (473)
- December 2010 (328)
- November 2010 (488)
- October 2010 (503)
- September 2010 (502)
- August 2010 (463)
- July 2010 (420)
- June 2010 (390)
- May 2010 (385)
- April 2010 (274)
- March 2010 (255)
- February 2010 (398)
- January 2010 (363)
- December 2009 (173)
- November 2009 (295)
- October 2009 (287)
- September 2009 (259)
- August 2009 (416)
- July 2009 (361)
- June 2009 (300)
- May 2009 (150)
- April 2009 (239)
- March 2009 (161)
- February 2009 (284)
- January 2009 (457)
- December 2008 (178)
- November 2008 (346)
- October 2008 (170)
- September 2008 (385)
- August 2008 (160)
- July 2008 (144)
- June 2008 (78)
- May 2008 (128)
- April 2008 (119)
- March 2008 (98)
- February 2008 (82)
- January 2008 (55)
- December 2007 (62)
- November 2007 (68)
- October 2007 (49)
- September 2007 (46)
- August 2007 (95)
- July 2007 (88)
- June 2007 (2)