Search Discussions

122 discussions - 535 posts

  • Hi, when someone subscribes to my mailman mailinglist I get a subscription request (like I configured it): [..] At your convenience, visit: http://www.etc.example.org/foo/bar [..] Hm, this is not the ...
    Georg SauthoffGeorg Sauthoff
    Nov 17, 2006 at 10:47 am
    Nov 23, 2006 at 5:00 am
  • [x-posted to an anti-spam list] Hi. This is not specific to mailman, but I had a lot of trouble with it. I am sure I am not the only one, so I figured I'll share. In recent months the problem of ...
    Gadi EvronGadi Evron
    Nov 10, 2006 at 12:48 pm
    Nov 13, 2006 at 6:20 pm
  • I need to find out what others on the list use to produce graphical based newsletters. I have been mailing out lots of text only based letters to my lists and I get minimal response...what do some of ...
    Dr. Scott S. JonesDr. Scott S. Jones
    Nov 20, 2006 at 7:49 am
    Nov 22, 2006 at 1:13 am
  • Greetings, We've recently installed Mailman 2.1.9 on our server. We have installed and configured Mailman in a postfix environment that is using mysql (See our server configuration at the bottom of ...
    Nov 3, 2006 at 9:06 pm
    Dec 4, 2006 at 5:09 pm
  • Hi there, I run Mailman 2.1.9 on two load-balanced RHEL3 servers. The load balancer is an LVS director (http://www.linuxvirtualserver.org), a layer 4 software load balancer. The load balancer ...
    Guy WaughGuy Waugh
    Nov 27, 2006 at 2:00 am
    Nov 29, 2006 at 1:51 pm
  • When I send email to listname-leave at domain.com the names don't unsubscribe from the lists. Why would that be? Thanks. --------------------------------- Everyone is raving about the all-new Yahoo! ...
    Ken CheneyKen Cheney
    Nov 29, 2006 at 4:54 pm
    Dec 5, 2006 at 3:54 pm
  • I have a spammer who's posting to mailman at domain.com. Obviously, the administration interface cannot be accessed for this list. How do I stop someone from posting to this list? Also, I can't get ...
    Nov 21, 2006 at 8:15 pm
    Nov 22, 2006 at 2:00 am
  • First let me say I am very new to Mailman, very new to Linux, and very new to mailing lists. (it took me 2 days to get the listserv to even send out :( ) I have the listserv up and sending to my ...
    Ken CheneyKen Cheney
    Nov 29, 2006 at 4:53 pm
    Dec 1, 2006 at 7:49 pm
  • Hi everyone, The organisation I work for is in the process of migrating our currentmailing lists (using majordomo) to Mailman. In parallel of this migration we have been ask to set up a very large ...
    Mathias AndreMathias Andre
    Nov 24, 2006 at 7:39 am
    Nov 29, 2006 at 9:35 pm
  • I am the administrator of an E-list run by mailman at my ISP, PatriotNet, and as admin I'm experiencing difficulties. (PatriotNet has installed v 2.1.5) These difficulties are, in ascending order of ...
    Alan McConnellAlan McConnell
    Nov 11, 2006 at 8:47 pm
    Nov 19, 2006 at 8:12 pm
  • Hello, I would like my mailing list to have the following configuration: the messages from most of subscribers are rejected, and there are a few subscribers whose messages are hold for moderation. Is ...
    Dominika TkaczykDominika Tkaczyk
    Nov 30, 2006 at 12:20 pm
    Dec 5, 2006 at 7:29 am
  • I have a number of lists running happily, but a couple of new ones don't want to play. For testing purposes I subscribe myself to them and a couple of other addresses. All message sent to them from ...
    Brian ParishBrian Parish
    Nov 27, 2006 at 12:50 pm
    Dec 1, 2006 at 6:42 pm
  • hello all, I am trying to setup a mailing list with mailman. Let me give you the background. 1) I have a website that I want to maintain a list for but my host provider charges me if I run a list ...
    Eric WalkerEric Walker
    Nov 3, 2006 at 9:26 pm
    Nov 9, 2006 at 12:55 am
  • First let me say that I realize that filtering is supposedly better done at the MTA level (and we are running spam assassin), but I don't have access to that level; I am only a moderator for several ...
    Duane ClarkDuane Clark
    Nov 30, 2006 at 6:00 pm
    Dec 7, 2006 at 8:11 am
  • I've installed mailman using Yum. I'll create a list which sends out the email that the list has been created. When I subcribe using the email it works fine, however if I click on the link back to ...
    Vernon WebbVernon Webb
    Nov 28, 2006 at 5:18 pm
    Dec 4, 2006 at 9:10 pm
  • Hello, IT's (past) time to upgrade our mailman 2.1.5 installation to version 2.1.9. I'm wondering whether anyone has experience they'd like to share going directly from 2.1.5 to 2.1.9 -- anything to ...
    Ivan FetchIvan Fetch
    Nov 8, 2006 at 10:55 pm
    Nov 22, 2006 at 2:46 am
  • I am seeing the following error in my smtp-failure log Nov 12 18:33:44 2006 (18367) All recipients refused: {'jrc at rodricon.com': (451, 'Temporary local problem - please try later')}, msgid: ...
    J.R. ConstanceJ.R. Constance
    Nov 13, 2006 at 3:43 am
    Nov 13, 2006 at 6:15 pm
  • Hi all. I have a user who does not check "pending for approvals" so long, and now the mailman web interface trows an error (an timeout or resources issue, not shure). The thing is: Can i delete those ...
    Gerardo HerzigGerardo Herzig
    Nov 10, 2006 at 1:57 pm
    Nov 13, 2006 at 1:54 pm
  • I'm aware of the Mailman syntax for banning domains, but I'd like to ban members now whose email address *starts* with a given string! I've had a lot of requests lately from "debora" to join my list, ...
    Martin DennettMartin Dennett
    Nov 10, 2006 at 8:35 pm
    Nov 11, 2006 at 10:16 pm
  • Has anyone configured Mailman to allow ICS / iCalendar attachments? I've added text/calendar to the pass_mime_types setting in content filtering, but the ICS attachment was removed. The full content ...
    David GibbsDavid Gibbs
    Nov 27, 2006 at 4:59 pm
    Nov 27, 2006 at 10:12 pm
  • Hello, I've noticed heldmsg-ListName-* files in mailman/data, which the request.pck file for the given list isn't aware of (the pickle only has a version string). Is there something which others have ...
    Ivan FetchIvan Fetch
    Nov 17, 2006 at 12:54 am
    Nov 21, 2006 at 8:04 pm
  • Hi Everyone, I am subscribing memebers to my list and they pointed out to me that the welcome, invite, and or confirm email message get marked and moved into their spam folder. Is there any settings ...
    Nov 14, 2006 at 2:01 pm
    Nov 16, 2006 at 11:20 pm
  • I am new to Mailman. I currently have two problems. I am using Mailman version 2.1.5 with Postfix. I am able to send mails to the list and the mails are sent to the subscribers. According to the mail ...
    Henrik RasmussenHenrik Rasmussen
    Nov 8, 2006 at 1:21 pm
    Nov 9, 2006 at 4:14 pm
  • Somehow, a user has gotten himself subscribed to one of my lists with an address of the form foo at bar@hotmail.com. How do I get rid of this subscription? The various web interface options just give ...
    Dave SherohmanDave Sherohman
    Nov 28, 2006 at 6:37 pm
    Dec 1, 2006 at 7:55 pm
  • Hi All, I'm fairly new to mailman and have just recently installed it (version 2.1.9) on a Fedora 6 VM. The installation went well with no major issues. Though the problem I'm having at the moment is ...
    Saxvik, BenSaxvik, Ben
    Nov 30, 2006 at 2:41 am
    Dec 1, 2006 at 6:59 am
  • Hi, I setup mailman to manage lists at xxx at lists.foo.com The mailinglists works, but the admininterface gives me a headache. The Webserver is not accessible from the outsite, so I have to use a ...
    Dark ServantDark Servant
    Nov 28, 2006 at 12:43 pm
    Nov 29, 2006 at 10:16 am
  • We have a list running 100,000+ email addresses, and we broadcasted a message. How can we find out if all messages are successfully sent, or still in queue? If still in queue, how many message left ...
    Stanley ChenStanley Chen
    Nov 25, 2006 at 7:45 am
    Nov 28, 2006 at 7:49 am
  • I recently upgraded from mailman 2.0.x to 2.1.x finally (yeah, I've been kinda busy moving countries again) and was bitten by what seems to me to be a change in behaviour. Mail sent to <listname ...
    Peter RadcliffePeter Radcliffe
    Nov 15, 2006 at 1:46 am
    Nov 17, 2006 at 7:45 pm
  • Hi, There is a "umbrella_list" setting in the "General Options" for my lists but I'm not sure how I'm supposed to setup the umbrella list to allow posting from people who are on the sub lists. Has ...
    Lonnie NortonLonnie Norton
    Nov 30, 2006 at 6:11 am
    Dec 1, 2006 at 8:37 pm
  • I am trying to set up Mailman at boost-consulting.com, which uses Sendmail. The README states: mm-handler is only really useful when it mostly "owns" its mail domain So I am inclined to simply point ...
    David AbrahamsDavid Abrahams
    Nov 29, 2006 at 11:10 pm
    Nov 30, 2006 at 7:30 am
  • Hello, I am the manger for a couple of different lists that are relatively new. It has come to my attention in the last few days that our members are unable to access the archives when they click on ...
    Rachel AssuncaoRachel Assuncao
    Nov 27, 2006 at 5:10 pm
    Nov 28, 2006 at 12:26 am
  • Mailman users, I have two questions. We are running Mailman 2.1.5 on Redhat. 1. Is there a way when creating lists to have it automatically set certain fields with certain defaults such as Archives ...
    Tim TylerTim Tyler
    Nov 20, 2006 at 6:58 pm
    Nov 21, 2006 at 6:56 pm
  • Hi All, I have recently run into an issue with downloading the full raw archive on one list. The archive has reached 1086 MB in size and I now get this error. Has anyone seen this before or know how ...
    Jared NylandJared Nyland
    Nov 13, 2006 at 10:29 pm
    Nov 17, 2006 at 8:55 pm
  • I've got a situation with a list that is causing problems. I'm sorry this is so long, but here's the things I've done. I've searched the archives and I don't seem to see anything that applies. I'm ...
    George SextonGeorge Sexton
    Nov 16, 2006 at 9:19 pm
    Nov 17, 2006 at 6:01 pm
  • I'm a non-developer with some mailman admin experience, although I've never set up a new list until recently. My question: a few days ago I posted the first message to the list I set up and it does ...
    Lori HoustonLori Houston
    Nov 10, 2006 at 6:29 pm
    Nov 10, 2006 at 8:58 pm
  • Ok, I am back. I am able to send a message out of exim4 from the command line through my webhosts smtp servers. (godaddy). Now I need to install mailman and get them to play together. Well it says ...
    Eric WalkerEric Walker
    Nov 9, 2006 at 9:13 pm
    Nov 10, 2006 at 5:57 pm
  • """ Printing of traceback and other system information has been explicitly inhibited, but the webmaster can find this information in the Mailman error logs """ how do we ENABLE (uninhibit) the ...
    Will trillichWill trillich
    Nov 7, 2006 at 9:10 pm
    Nov 8, 2006 at 8:12 am
  • Hello, I'm hoping that one of you can shed some light on a problem that I'm having with several established mailing lists. I recently moved all of my lists over to an SSL based connection. After the ...
    Rob SmithersRob Smithers
    Nov 2, 2006 at 6:45 pm
    Nov 3, 2006 at 6:49 pm
  • Using Mailman 2.1.9 as a list administrator. Trying to block posts with string "test" in the subject line but would like to automatically approve certain subjects with the same string, such as ...
    Bob McLeranBob McLeran
    Nov 29, 2006 at 6:11 pm
    Nov 30, 2006 at 6:39 am
  • After many years of using mailman, and having upgraded to 2.1.9 and running that for a few weeks, all mailing lists have now stopped delivering mail. Never has this happened before. I have tried ...
    Dirk KoopmanDirk Koopman
    Nov 26, 2006 at 10:45 pm
    Nov 27, 2006 at 11:02 pm
  • Hello folks, I think I wrote about this problem some time ago and thought I fixed that with your help. But acually I did not. :( I running a German list and so also have a German list archive. Now I ...
    Jan KohnertJan Kohnert
    Nov 21, 2006 at 5:29 pm
    Nov 23, 2006 at 6:39 pm
  • Hi! These are the querries related to Freepbx- 1. How does Asterisk interact with Freepbx? 2. What is the exact finction of Freepbx? 3. How can we load additional modules in Freepbx(other than the ...
    Vyom asteriskVyom asterisk
    Nov 21, 2006 at 11:16 am
    Nov 22, 2006 at 6:00 am
  • I am running FreeBSD 6.1 with Postfix I setup a list "mylist" I subsubscribed to it from my local email address, and my gmail address then I sent a message from the local email address and both email ...
    Richard BatesRichard Bates
    Nov 15, 2006 at 4:25 am
    Nov 19, 2006 at 7:59 pm
  • hi We are using Mailman 2.1.9. I want the admin of the list to be able to do the following by sending emails and not visiting the admin section (web) - Add/delete member(s) - Delete "all" members of ...
    BG MaheshBG Mahesh
    Nov 19, 2006 at 6:00 am
    Nov 19, 2006 at 6:57 pm
  • I've been hosting a few lists using Mailman for quite some time now. Recently AOL has started deferring emails from my server, possibly because one person on a list started a new subscription when ...
    Nov 16, 2006 at 7:03 pm
    Nov 17, 2006 at 4:27 am
  • I checked the archives and didn't find what I was looking for, so please forgive me if this has been answered already. I keep having about 90% of my 3000 subscribers bouncing on a regular basis. I've ...
    Nov 14, 2006 at 8:03 pm
    Nov 15, 2006 at 10:59 am
  • I'm a newbie...in Linux and mailman too.... ...Does anyone know why i'm getting this error when i'm trying to send and email to a mailing list? Nov 10 12:35:04 2006 (31798) delivery to mailman-owner ...
    Lopez, Carlos AndresLopez, Carlos Andres
    Nov 10, 2006 at 7:41 pm
    Nov 10, 2006 at 10:06 pm
  • Greetings! I'm a newbie, a user, not a programmer -- and I have a question. A message to one of our lists didn't go through. Does the error message indicate a problem at the server or is it within ...
    Gretchen at Ladyweave.com | 269-369-1114Gretchen at Ladyweave.com | 269-369-1114
    Nov 10, 2006 at 2:45 pm
    Nov 10, 2006 at 6:12 pm
  • I did something, although I can't for the life of me figure out what, that broke my mailman server. The web presence hasn't changed any, user administration works fine, as does access to the archive, ...
    G. Armour Van HornG. Armour Van Horn
    Nov 9, 2006 at 7:46 am
    Nov 10, 2006 at 1:08 am
  • Fresh install of mailman on an Ubuntu system and I get the following error cropping up when I send a message to a list: Nov 08 17:04:20 2006 (9848) uncaught archiver exception at filepos: 0 Nov 08 ...
    Kyle SextonKyle Sexton
    Nov 8, 2006 at 11:30 pm
    Nov 9, 2006 at 4:10 am
Group Navigation
period‹ prev | Nov 2006 | next ›
Group Overview
groupmailman-users @

130 users for November 2006

Mark Sapiro: 124 posts Brad Knowles: 48 posts Patrick Bogen: 40 posts Barry Warsaw: 12 posts Stephen J. Turnbull: 9 posts Dragon: 8 posts Ivan Fetch: 8 posts Raquel: 8 posts Gadi Evron: 7 posts John W. Baxter: 7 posts Zbigniew Szalbot: 7 posts McJathan: 6 posts Ralf Hildebrandt: 6 posts Alan McConnell: 5 posts Brian Parish: 5 posts Eric Walker: 5 posts Ken Cheney: 5 posts Larry Stone: 5 posts LuKreme: 5 posts Martin Dennett: 5 posts
show more