FAQ

Python > mailman-users > December 2003

Search Discussions

237 discussions - 578 posts

  • Hi! I transferred several mailing lists from oldserver (V2.0.x) to the new server with Mailman 2.1.x. The problem is that I used fix_url script to transfer few lists from old www.virtualdomain.com ...
    GourGour
    Dec 16, 2003 at 8:40 am
    Dec 20, 2003 at 4:56 pm
  • Hello, i still have some problems getting mailman to run. I added the aliases to the postfix main.cf but mail isn't delivered to the subscribers - it's mailed to the catch-all address, which would ...
    Thomas MurphyThomas Murphy
    Dec 16, 2003 at 10:37 am
    Dec 16, 2003 at 2:59 pm
  • Hi. I've updated to mailman 2.1.3 on my rh7.3 system. The lists work. Most of the admin functions work. Check_perms says everything is ok. However, the functions available from the admindb CGI don't ...
    Chris JohnsonChris Johnson
    Dec 22, 2003 at 2:25 pm
    Dec 24, 2003 at 6:22 am
  • ----------------------------------------- Hot Mobiil - helinad, logod ja pilts?numid! http://portal.hot.ee
    KirstiKirsti
    Dec 6, 2003 at 9:28 am
    Dec 25, 2003 at 4:36 pm
  • We just sent out a message to our employees. There calling because they can't open the pdf attachment. Looking at it, it looks like the .pdf part is missing from the attachment name in the message. ...
    GagelGagel
    Dec 18, 2003 at 7:12 pm
    Dec 24, 2003 at 1:52 am
  • I'm running RH7.3, Mailman 2.1-8. I've looked at the bug list but haven't found anything like this. Posts are held for various reasons, in my case size issues, too big. I go to the Web interface at ...
    Chris JohnsonChris Johnson
    Dec 5, 2003 at 1:13 pm
    Dec 10, 2003 at 8:22 pm
  • Still haven't gotten a response on this, other than the fact that other people have noticed the same thing (wrote to the list about it a long time back). When mailmanctl is run with "-s" (supposedly ...
    Will YardleyWill Yardley
    Dec 12, 2003 at 7:58 pm
    Dec 12, 2003 at 10:35 pm
  • There's no mailman port here, but in case you want some other backports for Debian, www.backports.org is helpful. Perhaps mailman will show up there at some point. I've also found a link on ...
    ToddTodd
    Dec 9, 2003 at 4:26 pm
    Dec 11, 2003 at 9:49 pm
  • Hello, Our Mailman web server is listening on port 81 (not 80). I modified the config lines in mm_cfg.py to read... DEFAULT_URL_HOST = 'mail.stginternational.com:81' DEFAULT_EMAIL_HOST = ...
    Kent TaylorKent Taylor
    Dec 4, 2003 at 4:37 pm
    Dec 9, 2003 at 11:38 am
  • Hello to all, I?m new to this list. I have a problem with mailman and postfix. I set up mailman out of the box on my suse 8.2 system. I have made the changes in my httpd.conf and createt a new list ...
    Zimmermann ChristianZimmermann Christian
    Dec 1, 2003 at 7:34 am
    Dec 3, 2003 at 7:36 am
  • I installed mailman and have had a list running for ages now. It works great. Just the other day I added a new list to my system. I can access the admin page via the web but when i make changes and ...
    BlistBlist
    Dec 24, 2003 at 5:51 pm
    Dec 27, 2003 at 12:42 am
  • I imported a list of 8000 users and send an html email to the list. It is a newsletter (announcement only) type list. I received an especially low number of banner impressions on this first send and ...
    DarwinDarwin
    Dec 19, 2003 at 2:25 pm
    Dec 22, 2003 at 3:37 pm
  • Has anyone got a cold install of Mailman running on Mac OS X 10.3 (no, not Panther server, it comes pre-installed there :-)) yet? I walked through the Jaguar (server) install walk-through found at ...
    R. A. HettingaR. A. Hettinga
    Dec 7, 2003 at 6:53 pm
    Dec 18, 2003 at 7:30 am
  • Hi, where is the subject in welcome messages?. I've personalized welcome messages for each list(creating a LANG directory into every LIST directory and having there my personal templates). But I ...
    Juan Pablo BarrosoJuan Pablo Barroso
    Dec 16, 2003 at 10:24 am
    Dec 16, 2003 at 11:46 am
  • I have mailman set up correctly (I think); I followed the tutorial at http://www.yolinux.com/TUTORIALS/LinuxTutorialMailman.html and I've got the web interface set up. During setup I told mailman ...
    Michael SullivanMichael Sullivan
    Dec 12, 2003 at 6:40 pm
    Dec 14, 2003 at 5:40 pm
  • Howdy. Here's my situation... my DSL ISP (verizon) blocks port 80. I registered a domain and found a dynamic DNS service that will forward requests. i forward 'www.on-rope.net' to 'on-rope.net:8080'. ...
    Seth LakeSeth Lake
    Dec 8, 2003 at 8:07 pm
    Dec 11, 2003 at 1:04 pm
  • I have a list with a & in the name, is this a dis-allowed character in the list names? I have recieved a message back indicating a problem with the use of the "&" see below: Final-Recipient: rfc822; ...
    GagelGagel
    Dec 3, 2003 at 6:08 pm
    Dec 3, 2003 at 9:24 pm
  • Hi, I am planning to use mailman simply to inform the website update to the members, so that the members should not be able to send mail to the list address. Can I do this? Regards, Damar Thapa ICT ...
    Damar Thapa, ICT TechnicianDamar Thapa, ICT Technician
    Dec 1, 2003 at 1:54 am
    Dec 2, 2003 at 6:58 pm
  • Problem description: I can no longer subscribe to or send mail to my lists. Here's some detail. From the standpoint of being able to use the mailing lists (subscribe, post messages, etc), the lists ...
    BackdocBackdoc
    Dec 28, 2003 at 3:29 pm
    Dec 29, 2003 at 3:06 am
  • Hi, I'm not sure that this is the right address to send this, but here it goes: Addition to Mailman: - Allow users to retrieve password via email commands, not only via the web interface. When a ...
    Roberto PerezRoberto Perez
    Dec 25, 2003 at 9:06 pm
    Dec 28, 2003 at 4:42 pm
  • Hello, I'm new at administering a mailman list and I'm having problems with bounces. Every time someone write to the list I receive lots of mails notificating bounces. after receiving them I enter ...
    Jose floridoJose florido
    Dec 22, 2003 at 2:46 pm
    Dec 27, 2003 at 1:08 am
  • We have an old version of python installed which is heavily used by the Ensim, so I need to compile the up-to-date version to an isolated place and assign mailman to use this installation. Can ...
    BenBen
    Dec 23, 2003 at 11:12 am
    Dec 24, 2003 at 5:36 pm
  • I want to block all mail from a specific domain. Under Privacy options/sender filters, in the box marked "List of non-member addresses whose postings will be automatically discarded" I put ...
    Dan JonesDan Jones
    Dec 17, 2003 at 10:54 pm
    Dec 17, 2003 at 11:38 pm
  • Hi, I have a system running sendmail and Mailman. I followed all the installation instructions faithfully, and yet, mails sent to a list do not get delivered to recipients. I ensured that the list ...
    Somik RahaSomik Raha
    Dec 16, 2003 at 2:47 am
    Dec 16, 2003 at 5:09 pm
  • Hi list! I would like to modify the messages I send on my lists. I would like to recode the text parts, so that all messages sent out use the same encoding and character set, before doing anything ...
    Nagy GaborNagy Gabor
    Dec 12, 2003 at 11:21 am
    Dec 15, 2003 at 8:17 am
  • Hello All, Something very weird is happening with my Mailman. When someone sends an e-mail to a mailing list and put a long subject, 60 or 70 characters, the e-mail is being received with the prefix ...
    Paulo R KappkePaulo R Kappke
    Dec 10, 2003 at 7:58 pm
    Dec 11, 2003 at 4:35 pm
  • Hello I've seen a few messages with this error in the searchable archive, but no responses. I've tried to list as much info as I can below. The setup was working fine until a couple of days ago when ...
    Simon WhiteSimon White
    Dec 8, 2003 at 8:33 am
    Dec 10, 2003 at 10:27 am
  • Hi, 1) when I try to edit the 'General Options' I get this error message: 'Error: real_name attribute not changed! It must differ from the list's name by case only.' even if I didn't set any chang at ...
    Vicnoise .Vicnoise .
    Dec 9, 2003 at 9:28 am
    Dec 10, 2003 at 5:41 am
  • Hi, Anyone have a shell script that will make take members of some lists and use them to make a consolidated list? For example: remove dupes(List A + List B + List C) = List D I'm sure it can be done ...
    John DellJohn Dell
    Dec 4, 2003 at 10:02 pm
    Dec 5, 2003 at 10:35 pm
  • Recently several of the mailing lists we run have developed a strange problem when generating the pipermail web archive pages. For a period of about ten days or so, all mail messages posted to the ...
    Guy Antony HalseGuy Antony Halse
    Dec 17, 2003 at 12:33 pm
    Jan 14, 2004 at 8:56 am
  • Hello all, I am having a little bit of a hard time with what is essentially a downgrade. Some background: the company I work for recently took over the backend sysadmin work for an ISP that runs ...
    Stephen GranStephen Gran
    Dec 2, 2003 at 2:46 am
    Dec 31, 2003 at 6:04 pm
  • Hi peoples sorry if this is the wrong list i couldnt get the 'listowners' mailing list rego page to work :( Anyway my question. I have setup various mailing lists all private for various heirarchy ...
    Michael 'keyser' Vettas AOCAB DirectorMichael 'keyser' Vettas AOCAB Director
    Dec 29, 2003 at 3:31 pm
    Dec 31, 2003 at 12:22 am
  • How can I remove all members of a MailMan mailing list? I know about the remove_members and sync_members scripts, but I don't have admin permissions, I can only access MailMan via CPanel provided by ...
    WildoneWildone
    Dec 27, 2003 at 8:36 pm
    Dec 30, 2003 at 2:14 am
  • Just installed Mailman, and being such a noob, I can't seem to work out how to utilise the add_members script correctly. ./add_members user at address.com listname It complains that I haven't used ...
    Brendan PrattBrendan Pratt
    Dec 29, 2003 at 1:37 am
    Dec 29, 2003 at 4:07 am
  • Folks- The (IMHO) excessively long tokens are causing considerable confusion on the lists I help run. The problem is that any URL longer than 80 characters will be chopped by many mail clients- ...
    Brett DikemanBrett Dikeman
    Dec 27, 2003 at 6:20 am
    Dec 27, 2003 at 6:43 pm
  • Checking to see if anyone has learned how or if available? -----Original Message----- IS there an export function of latest version 2.1.3 ? If so, how can a user (admin) not server owner perform this ...
    Michael JasinskiMichael Jasinski
    Dec 13, 2003 at 12:12 am
    Dec 24, 2003 at 5:39 pm
  • Can someone tell me if the mailman 2.1.3 sendmail interface is safe from addresses that contain shell meta-characters? ==================== Kevin W. Gagel Network Administrator (250) 561-5848 local ...
    GagelGagel
    Dec 19, 2003 at 6:34 pm
    Dec 23, 2003 at 7:52 pm
  • When I send commands to the -request address I get an email back that says: There were problems with the email commands you sent to Mailman via the administrative address <?????-request@????.org . To ...
    Martin SpriggsMartin Spriggs
    Dec 19, 2003 at 1:31 am
    Dec 19, 2003 at 4:12 pm
  • Hi, I have problem running list and I am searching for workaround. I run list when messages are mainly exchanged in iso-8859-2 encoding. Some people subscribed on list are using MS Exchange/Outlook. ...
    Łukasz MichalskiŁukasz Michalski
    Dec 15, 2003 at 1:21 pm
    Dec 18, 2003 at 8:11 am
  • Hi, How can I view all members in a list rather than only in chunks for each letter? Thanks Ricardo
    Ricardo KleemannRicardo Kleemann
    Dec 11, 2003 at 8:09 pm
    Dec 12, 2003 at 3:47 pm
  • Hi there. I'm looking to setup a newsletter type of list. It will be one way only. There doesn't seem to be an explicit option for this on the admin screen. However it looks like perhaps Emergency ...
    Bill WolfBill Wolf
    Dec 11, 2003 at 12:39 am
    Dec 11, 2003 at 5:11 am
  • I have had a list admin (of three lists) *abandon* the mailing lists for which he was responsible. Unfortunately, he did this about three weeks ago without my knowledge and without any notice, and I ...
    Rod NeepRod Neep
    Dec 6, 2003 at 12:42 am
    Dec 7, 2003 at 2:12 pm
  • Hello all, At this point, I am using the default install of Mailman that came with RedHat 9 and have updated the rpms to the latest RedHat release. However, I have always ran apache as another user ...
    Dave FilchakDave Filchak
    Dec 6, 2003 at 6:16 pm
    Dec 6, 2003 at 9:30 pm
  • Greetings- I have a question: is there a method to add the subscriber names, in addition to e-mail addresses, en masse? That would be really usefule to me. GNU Peace, Ron Carson Octadyne Systems
    John SmithJohn Smith
    Dec 4, 2003 at 4:23 pm
    Dec 6, 2003 at 4:00 am
  • greetings i have created a bunch of lists. Now i just noticed that the max_num_recipients is set to 10 on all messages. I have to go to all of my lists and set this to ' 0 '. Why does this not make ...
    Jeff DonovanJeff Donovan
    Dec 4, 2003 at 5:10 pm
    Dec 5, 2003 at 12:18 pm
  • +-+-+ Dec 02 00:31:22 2003 (10105) Uncaught runner exception: unknown encoding Dec 02 00:31:22 2003 (10105) Traceback (most recent call last): File "/usr/local/mailman/Mailman/Queue/Runner.py", line ...
    Simon WhiteSimon White
    Dec 4, 2003 at 10:29 am
    Dec 4, 2003 at 2:39 pm
  • Do I need to update the data under $prefix/lists/ when upgrading from 2.0.X to 2.1.X? If so, how? I don't see any mention of it in the 2.1.3 INSTALL or UPGRADING document, but when I try the upgrade ...
    Morgan FletcherMorgan Fletcher
    Dec 1, 2003 at 7:45 pm
    Dec 4, 2003 at 1:27 am
  • Greetings How can i create a list with out having the hostname of the server displayed in the list? example: I create a new list and it shows up as " newlist at server1.mydomain.com " How can i get ...
    DonovanDonovan
    Dec 1, 2003 at 6:28 pm
    Dec 2, 2003 at 12:32 pm
  • Howdy! I'm experiencing similar errors to those described by Stephen Gran early in December as well as these: --- Dec 30 23:46:13 2003 (97949) Delivery exception: EOF read where object expected Dec ...
    Lars BungumLars Bungum
    Dec 30, 2003 at 10:51 pm
    Jan 5, 2004 at 6:18 pm
  • Hello In the mailman program, how do I back up my data? Is there a list of subscribers? Thank you.
    AryrossAryross
    Dec 29, 2003 at 9:30 pm
    Jan 2, 2004 at 7:45 pm
Dec 2003
12345
Group Navigation
period‹ prev | Dec 2003 | next ›
Group Overview
groupmailman-users @
categoriespython
discussions237
posts578
users247
websitelist.org

247 users for December 2003

Simon White: 44 posts Jon Carnes: 39 posts Todd: 38 posts Chris Johnson: 20 posts Gagel: 14 posts Erick Mechler: 12 posts Gour: 11 posts Paul H Byerly: 9 posts Thomas Murphy: 8 posts Thomas Hochstein: 7 posts Axel Beckert: 6 posts Darwin Sanoy: 6 posts Erick Mechler: 6 posts Michael Jasinski: 6 posts Jeff Donovan: 5 posts Michael Sullivan: 5 posts R. A. Hettinga: 5 posts Scott C. Villinski: 5 posts Vivek Khera: 5 posts Jim McCarty: 4 posts
show more
Archives