FAQ

Search Discussions

259 discussions - 538 posts

  • I recently received a message about problems with Mailman and CPanel. I don't know anything about CPanel, or why Mailman and CPanel might not be working together, but that doesn't mean I wouldn't be ...
    Barry WarsawBarry Warsaw
    Sep 22, 2003 at 10:32 pm
    Sep 23, 2003 at 9:27 pm
  • Hello All, I am trying to configure mailman on my server with qmail-1.03. 1. I have compiled mailman with ./configure --prefix=/home/mailman/foo --with-mail-gid=vchkpw --with-cgi-gid =nobody ...
    SystemSystem
    Sep 26, 2003 at 11:49 am
    Oct 2, 2003 at 2:17 pm
  • Hi, what's the best way to setup a announce-only list, I have made a few things in configuration web page but the best I can get is to have all messages from a certain e-mail address to be placed on ...
    David MorgadoDavid Morgado
    Sep 19, 2003 at 10:15 pm
    Sep 23, 2003 at 1:33 am
  • Hi, I configured an "announcement-only" list according to the instructions in the FAQ, http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq03.011.htp And I setup my email address as moderator ...
    Ricardo KleemannRicardo Kleemann
    Sep 23, 2003 at 7:52 pm
    Sep 24, 2003 at 6:18 pm
  • using redhat 9, sendmail 8.12.8, mailman 2.1.2 I can access the web interface, send messages to mailman at domain and not receive any error replies. What I cannot do is get any mail from mailman. If ...
    Michael W. CockeMichael W. Cocke
    Sep 12, 2003 at 12:14 pm
    Sep 15, 2003 at 12:40 pm
  • I have released Mailman 2.1.3, a bug fix release which also contains support for four new languages: Ukrainian, Serbian, Euskara (Basque), and Danish. This release also contains a fix for a ...
    Barry A. WarsawBarry A. Warsaw
    Sep 29, 2003 at 1:10 pm
    Oct 2, 2003 at 8:59 pm
  • Is it possible to install and run Mailman on our "shared web host" (Verio)? It can't be accessed by Telnet -- only by FTP and HTTP. The whole installation seems to rely on a Telnet connection ... ...
    Kai VermehrKai Vermehr
    Sep 15, 2003 at 4:07 pm
    Sep 15, 2003 at 8:46 pm
  • Hello, I have a problem to send email from an Microsoft Exchange Server to a Mailman server. 1. Several users are subscribed to an Exchange mailing list. then, they can send messages on the Exchange ...
    BERTHOLD JeanBERTHOLD Jean
    Sep 2, 2003 at 10:24 am
    Sep 5, 2003 at 1:27 pm
  • Hi, Is there any way to configure Mailman such that, for an announcement-only type list, when a message is sent to the list, the To: shows the member's address, rather than the list address? Some ...
    Ricardo KleemannRicardo Kleemann
    Sep 26, 2003 at 6:47 am
    Sep 27, 2003 at 1:05 am
  • hi, i successfully set up mailman and created a test list. Playing arround with approval of list joining requests, i noticed that the immediate approval request mails to the list owner,moderator get ...
    Timo ProescholdtTimo Proescholdt
    Sep 9, 2003 at 11:58 am
    Sep 10, 2003 at 12:14 am
  • My list owners are getting Sobig files bounced to them through the administrative addresses. One of their ISPs has decided to reject those relayed messages with a 550 User Unknown because they ...
    Rob CarlsonRob Carlson
    Sep 2, 2003 at 11:04 pm
    Sep 5, 2003 at 1:03 am
  • My organization recently switched from Majordomo to Mailman. We are *very* happy with the change to say the least. One of my list owners needs to get a list of all subscribers for a particular list ...
    Rob DayRob Day
    Sep 30, 2003 at 8:59 pm
    Oct 1, 2003 at 8:57 pm
  • Hi, My organization just made the switch from Majordomo to Mailman. I am most pleased with Mailman to say the least. I am, however, having one problem. A user will subscribe to the list with the ...
    Rob DayRob Day
    Sep 18, 2003 at 7:22 pm
    Sep 19, 2003 at 12:32 am
  • We've had an on and off again problem with mailman not actually performing the actions it says it is doing. The main example is subscribing to a list. You can do the actions via the web or email ...
    Todd GreenTodd Green
    Sep 15, 2003 at 4:22 pm
    Sep 17, 2003 at 1:03 am
  • Can anyone tell me how to change the text formatting of my information page for my mailman list? Whenever I change fonts simply by using <font commands or using style sheets and <div commands the ...
    KrapmeisterKrapmeister
    Sep 15, 2003 at 2:09 pm
    Oct 8, 2003 at 6:04 pm
  • Can anyone help me with this problem? I've discovered that some messages from my mailman installation went out with the following return path which is definitely not my system address: Return-Path: ...
    John ShaneJohn Shane
    Sep 27, 2003 at 7:25 am
    Sep 30, 2003 at 4:51 pm
  • I am wondering if anyone is having subscribers complain about Eudora clipping messages? I now have three cases of Eudora 5.x users receiving messages where the messge text is missing. Only the text ...
    Randy StoeckerRandy Stoecker
    Sep 24, 2003 at 4:37 pm
    Sep 25, 2003 at 1:44 am
  • Greetings! I'm attempting to use Mailman on RedHat Linux 9.0. I installed it as part of the initial installation of RedHat, via the RPM that came on the CD. I set up a list using the "newlist" ...
    Michael D. HensleyMichael D. Hensley
    Sep 19, 2003 at 11:54 pm
    Sep 22, 2003 at 8:18 pm
  • I'm encountering a very peculiar issue here. First off, my versioning information: mailman 2.1.2, Postfix 2.0.14 and FreeBSD 4.9-PRERELEASE. If I create test at gubug.org and try to post to it, it ...
    Anthony ChavezAnthony Chavez
    Sep 20, 2003 at 12:39 am
    Sep 20, 2003 at 3:44 am
  • Hello List FAQ: 1.15. What is the largest list Mailman can run? http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq01.015.htp Surely sf.net has much more traffic than the examples listed here ...
    Peter NixonPeter Nixon
    Sep 18, 2003 at 4:44 pm
    Sep 19, 2003 at 8:27 am
  • Hiya! Would it be to much to ask for a language specific request? Both I and my users think a function to post different messages to different users depending of their language choice would be great! ...
    Anders NorrbringAnders Norrbring
    Sep 30, 2003 at 1:25 pm
    Sep 30, 2003 at 4:44 pm
  • I've been setting up some Mailman (2.12) lists for the Board of Directors of a national non-profit organization. The problem is, one of our key board members, the chair of the busiest committee, ...
    Dave O'MearaDave O'Meara
    Sep 16, 2003 at 7:45 pm
    Sep 29, 2003 at 10:12 pm
  • We've been using mailman for several months now, and both we (the administrators) and they (the users) have been happy with it. So much so in fact, that we have now been asked to create so many ...
    Steve SweetSteve Sweet
    Sep 22, 2003 at 6:09 pm
    Sep 24, 2003 at 11:21 am
  • hi all, i've just started looking into getting mailman up and running. it appears that mailman was installed by redhat 8. i am aware that this version may be slightly out of date: [root at shiraz ...
    Michael BartlettMichael Bartlett
    Sep 23, 2003 at 12:59 pm
    Sep 23, 2003 at 1:31 pm
  • I am trying to change mailman's acknowledgement email on joining a group - so I can use it for a newsletter. I followed the FAQ here: ...
    Simon JudgeSimon Judge
    Sep 22, 2003 at 4:08 pm
    Sep 22, 2003 at 4:51 pm
  • Follow up on my last post. I went to MailList.py and added a new function to give me the URL with the trailing slash. Now all is good. Paul, who is going to have to find time to actually LEARN Python
    Paul H ByerlyPaul H Byerly
    Sep 19, 2003 at 4:42 am
    Sep 20, 2003 at 1:51 am
  • Hi all. As we have many lists "owned" by the same "list-master", up to now we've just used the site password to moderate these lists and set up the lists with any odl gobbledegook as the password. ...
    Morna FindlayMorna Findlay
    Sep 17, 2003 at 11:04 am
    Sep 18, 2003 at 10:04 pm
  • How I install Mailman on my server, can any buddy tell me plz. Regards, Arvinda Agarwal Yahoo Chat Id : aryawat_com MSN Chat ID : aryawat_com AIM : aryawatcom ICQ : 170482679 Cell Number : ...
    Arvinda AgarwalArvinda Agarwal
    Sep 14, 2003 at 6:58 am
    Sep 16, 2003 at 1:50 am
  • After creating the mailman list under mailman 2.1-8 on a Redhat Linux 9 system, I find that when I try to access http://$server/mailman/admin/mailman it reverts back to http://$server/mailman/admin ...
    Paul F. WilliamsPaul F. Williams
    Sep 11, 2003 at 9:39 pm
    Sep 14, 2003 at 11:22 pm
  • ./newlist mailman Returns: --------START QUOTE---------------------------------------------------- mailman at darna:/usr/local/mailman/bin$ ./newlist mailman Enter the email of the person running the ...
    Cody HarrisCody Harris
    Sep 11, 2003 at 10:08 pm
    Sep 12, 2003 at 12:04 am
  • I'm new to Mailman and I'm having a major problem getting it to start. I had it setup and working and then I needed to reboot the server for a kernel upgrade. Now when I start mailman it causes ...
    John LangeJohn Lange
    Sep 11, 2003 at 5:27 pm
    Sep 11, 2003 at 9:36 pm
  • OS: Redhat enterprise (7.2) Mailman: 2.1.2 MTA:Sendmail Hi, I'm a total newbie with Mailman and I can't figure out the problem I'm having. I've been pulling my hair out trying to figure this out all ...
    Concordia ChenConcordia Chen
    Sep 8, 2003 at 11:21 pm
    Sep 10, 2003 at 8:56 pm
  • I am using Mailman 2.1.2 on a Debian box with Exim 4.2. When I add myself to a list as say 'jknotzke at foo.com' (where mailman is not installed or virtual-hosted on foo.com). Mailman always sends ...
    Justin F. KnotzkeJustin F. Knotzke
    Sep 10, 2003 at 4:18 pm
    Sep 10, 2003 at 6:27 pm
  • Hey I am getting an error saying <mailman at list.serversunited.com : mail for list.serversunited.com loops back to myself WHat is wrong Tilly
    TillyTilly
    Sep 4, 2003 at 7:24 pm
    Sep 4, 2003 at 9:26 pm
  • Hi, I have a problem whit the "admin" emailadress of a mailman list. The list used to use Mailman version 2.0.13 The "admin" emailadress of the mailing list we used for exernall communication, for ...
    Walter VermeirWalter Vermeir
    Sep 30, 2003 at 8:59 pm
    Sep 30, 2003 at 11:05 pm
  • I have two lists, each with 20,000 names on them. The algorithm Mailman uses, to created the list e-mail, is inefficient. There was a program that was used in conjunction with Majordomo called ...
    Wayne SpivakWayne Spivak
    Sep 29, 2003 at 3:07 pm
    Sep 30, 2003 at 3:15 pm
  • I would like to remove the option for the "Edit the public HTML pages" in the administration area. Where can I find this to comment it out? TIA Best wishes, Rae
    RaeRae
    Sep 25, 2003 at 11:15 pm
    Sep 26, 2003 at 12:45 am
  • <snip <snip Uh, did you run the "mail -s ..." command on the command line as root? David -- David - Offbeat http://www.dafydd.com dafydd - Online Fire2 - Burning Man ESD: ...
    David BarrDavid Barr
    Sep 25, 2003 at 5:41 pm
    Sep 25, 2003 at 10:08 pm
  • Mailman seems to re-wrap MIME messages in a way that destroys OpenPGP/Mime signed messages (see my own messages to this list). Is there any way I can fix that through a different configuration? For ...
    Enno RehlingEnno Rehling
    Sep 22, 2003 at 9:31 am
    Sep 24, 2003 at 6:17 am
  • Hello, I couldn't find any instructions regarding this particular problem. We are moving lists (of version 2.0.3) from one domain server to another domain server (using version 2.1.2) -- the change ...
    List ManagerList Manager
    Sep 23, 2003 at 7:19 pm
    Sep 24, 2003 at 4:01 am
  • Is there a way to manually add entries to the list archives by appending text to the mailbox spool file? I noticed that the messages were being appended, but they aren't showing up on the webpage ...
    E.M. RecioE.M. Recio
    Sep 23, 2003 at 6:30 am
    Sep 23, 2003 at 1:05 pm
  • I runnng mailman on a box with currently four domains. I've added four groups of these lines: VIRTUAL_HOSTS = {'list.foo.com': 'list.foo.com'} <-- notice bracket add_virtualhost ('list.foo.com', ...
    Wayne SpivakWayne Spivak
    Sep 23, 2003 at 2:33 am
    Sep 23, 2003 at 9:09 am
  • I want to automatically reject non-subscriber postings, to save administration costs. There is a patch out somewhere for mailman 2.0 that we used, and I was hoping that 2.1 might not need to be ...
    Enno RehlingEnno Rehling
    Sep 22, 2003 at 8:58 am
    Sep 23, 2003 at 5:11 am
  • Version of Mailman: 2.1.2 Installed from source Version of OS: SuSE 8.0 MTA: Sendmail I have used http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq03.014.htp as guide in trying to track down ...
    Frank L. ParksFrank L. Parks
    Sep 18, 2003 at 9:25 pm
    Sep 19, 2003 at 1:02 pm
  • Dear Mailman: Does Mailman support antivirus features? Kind regards, V?ctor de Zaval?a Lafinur 2991, piso 15. Tel. 4804-2391 1425 Buenos Aires zavalia at fibertel.com.ar ______________________________
    Víctor de ZavalíaVíctor de Zavalía
    Sep 18, 2003 at 2:25 pm
    Sep 19, 2003 at 12:31 am
  • How can I setup mailman to use virtual domains? If I use http://domainA.com/mailman/admin/ I get the same page as http://domainB.com/mailman/admin How can I set diffrent lists for diffrent domains? ...
    Angel GabrielAngel Gabriel
    Sep 12, 2003 at 12:45 pm
    Sep 17, 2003 at 4:57 pm
  • Hi, I posted a question earlier today about how to convert/import existing mailing lists into mailman... and also about using courier mta... can someone help me out? ...
    Ricardo KleemannRicardo Kleemann
    Sep 15, 2003 at 11:47 pm
    Sep 16, 2003 at 12:29 pm
  • Hello- I have a mailman mailing list and many of the members do not show up when I browse using the legend (by first letter of the email address). But these addresses do show up when I do a 'Find ...
    Mac MartineMac Martine
    Sep 12, 2003 at 7:17 pm
    Sep 14, 2003 at 8:14 pm
  • Is there any option somewhere to configure what Mailman sets in the Precedence header? By default on Mandrake 9.1 (Mailman 2.0.x) it sets Precedence: bulk which is causing many webmail users ...
    Brandon Joseph AdamsBrandon Joseph Adams
    Sep 12, 2003 at 10:56 pm
    Sep 13, 2003 at 6:11 pm
  • If we turn on VERP, how is mail to the unqualified -bounces@ address processed? Is it ignored? At the moment we are frequently getting subscriptions disabled on the webdav.org lists (which don't use ...
    Joe OrtonJoe Orton
    Sep 10, 2003 at 9:17 am
    Sep 12, 2003 at 2:16 pm
Group Navigation
period‹ prev | Sep 2003 | next ›
Group Overview
groupmailman-users @
categoriespython
discussions259
posts538
users240
websitelist.org

240 users for September 2003

Jon Carnes: 52 posts Paul H Byerly: 26 posts Ricardo Kleemann: 19 posts Todd: 13 posts Michael W. Cocke: 12 posts Richard Barrett: 12 posts David Morgado: 10 posts John DeCarlo: 9 posts Klavs Klavsen: 9 posts Merle Reine: 8 posts Anders Norrbring: 7 posts Christian Schoepplein: 7 posts Tokio Kikuchi: 6 posts Barry Warsaw: 5 posts BERTHOLD Jean: 5 posts Concordia Chen: 5 posts Patrick Atlas: 5 posts Rae: 5 posts Vivek Khera: 5 posts Cody Harris: 4 posts
show more
Archives