Search Discussions

310 discussions - 829 posts

  • Please, i've installed glibc because i thought it was the problem... Somebody fought with a similar problem? :-( :-( :-( :-( Hello, i've installed mailman 2.1.2 in Mandrake 9.0 (sources)with python ...
    May 22, 2003 at 10:04 am
    May 23, 2003 at 4:52 am
  • On my server and another I checked, all messages sent to [list]-admin addresses results in a message being sent to the list admin about an "uncaught bounce notification". These weren't bounces, they ...
    Greg WestinGreg Westin
    May 5, 2003 at 3:20 pm
    May 15, 2003 at 6:47 pm
  • Can anyone help a non-techie install Mailman?
    John GrafflinJohn Grafflin
    May 26, 2003 at 4:00 am
    May 27, 2003 at 10:07 pm
  • Hello I'm running mailman 2.1 on a linux machine. My problem is that the mailman qrunner daemon constantly consumes 65-95% of cpu time. Nothing shows up in the logs while this goes on. Any ideas of ...
    Arnar BirgissonArnar Birgisson
    May 28, 2003 at 1:24 pm
    May 30, 2003 at 8:21 am
  • I have two errors that cause most of my shunting with a stock mailman 2.1.2 and Python 2.2.2 both compiled on Red Hat 9 w/ stock 2.4.20-8 kernel. Any help would be greatly appreciated. Thanks. They ...
    May 11, 2003 at 8:17 am
    May 14, 2003 at 1:41 am
  • Anyone seen this error before? I had mailman working with INN and then it stopped working. I don't think I changed anything and now it is working intermittently. Thanks, Adam Subject: Cron <mailman ...
    Adam LipsonAdam Lipson
    May 29, 2003 at 8:04 pm
    May 29, 2003 at 9:01 pm
  • Hello, I receive a couple error lines by starting mailman under ML 9.1. Python is installed via RPMs, mailman was build manually by the install scripts which you provide. The initializing error ...
    Oliver EggingerOliver Egginger
    May 12, 2003 at 1:37 pm
    May 24, 2003 at 1:12 am
  • I have been slowly getting my confirms to get accepted, first not recognized, now service not available. Where did the instructions come from to add the following or similar to my /etc/aliases: ...
    David WhitehurstDavid Whitehurst
    May 17, 2003 at 8:09 pm
    May 19, 2003 at 2:42 am
  • My mailman installation never works, and nobody could figure it out, but can someone PLEASE help me?!?!?!?! Error: This is the Postfix program at host vectec.net. I'm sorry to have to inform you that ...
    Cody HarrisCody Harris
    May 20, 2003 at 11:47 pm
    May 22, 2003 at 4:33 pm
  • Hello, I have a list of 15,000 emails. I would like to import them to mailman. I would then use mailman to email all of them my newsletter. Is this possible? Thanks, Chris
    Chris souzaChris souza
    May 15, 2003 at 4:01 pm
    May 16, 2003 at 1:21 am
  • I'm thinking of converting a Lyris newsletter list over to Mailman. We currently have 200,000 users. We are using a Lyris 4.2 server at the moment running on RedHat 7.3, (2) 733mhz procs, 512 ram 133 ...
    Joe HootJoe Hoot
    May 1, 2003 at 2:21 pm
    May 3, 2003 at 3:29 pm
  • I just upgraded to Mailman 2.1.2 and regenerated my archives. After the process was finished, some messages was given todays date, and was therefor misplaced in the archive hierarcy. It seems to me ...
    Stig PettersonStig Petterson
    May 6, 2003 at 1:35 pm
    May 9, 2003 at 12:49 am
  • Hello, i've installed mailman 2.1.2 in Mandrake 9.0 all looks to be good, but i can't start daemon. I can create a list, and admin it, but the list don't send. sendmail is working fine (after smrsh ...
    May 21, 2003 at 3:15 pm
    May 29, 2003 at 2:18 pm
  • Okay, I'm not the server admin.. I just mainly manage the lists and the list owners.. However, Mailman is being VERY slow. 2 hour turn around time. I know that we've got some spikes in python that go ...
    Dan Wright US2002021042Dan Wright US2002021042
    May 22, 2003 at 2:38 am
    May 25, 2003 at 5:27 pm
  • Hi, Just as there is a mass subscribe form in the web interface for MM, I'd like a mass UNSUBCRIBE. This (wish list) form could have a field to NUKE names from an existing list. Advice welcome. I ...
    Mark RauterkusMark Rauterkus
    May 15, 2003 at 10:50 pm
    May 17, 2003 at 1:35 am
  • At least, it looks weird to me. No lockfiles are present. I once had something like this happen with a corrupt .msg file, but I tried removing all files from the qfiles directory, and the problem ...
    William R. DicksonWilliam R. Dickson
    May 28, 2003 at 9:32 pm
    Jun 2, 2003 at 3:53 pm
  • Hello, I have a problem in configurating my mailman server, and the problem is this. I need that the http addresses of the pages (example the admin page or the listinfo page) changes from the name of ...
    Bruno AntónioBruno António
    May 22, 2003 at 6:35 pm
    May 23, 2003 at 4:28 am
  • After looking through the many articles on this topic, I am still not seeing a truly dynamic fix. First, I am not very familiar with python programming and this is the first time I have set up a ...
    Greg HarrisGreg Harris
    May 7, 2003 at 2:08 pm
    May 21, 2003 at 11:52 pm
  • Hi, I seem to be having a path problem with private archives. This is the path to an archive I can see: http://hostname/mailman/private/e2e/2003-May/000001.html In that archive is a link to a jpeg ...
    Hough, LindenHough, Linden
    May 8, 2003 at 8:47 pm
    May 9, 2003 at 4:34 pm
  • hello... mailman is still sending me emails that an authorization is required for postings even if it's told that no authorization is required? in the preferences for the setting: Must posts be ...
    Kalin MintchevKalin Mintchev
    May 19, 2003 at 6:11 pm
    Jun 9, 2003 at 3:25 pm
  • I remember reading somewhere that mailman can operate with a MySQL backend? If that is so, they it should be possible to develop a diffrent front end, to interface with users, add users to mailman ...
    Angel GabrielAngel Gabriel
    May 30, 2003 at 2:35 pm
    Jun 2, 2003 at 1:01 am
  • Hi all, After installing Mailman I was encouraged to set up a testlist. I did. I inserted the new aliases. I ran newaliasses. I hit enter. I've been waiting for my listowner e-mail to arrive. It ...
    Marko LeerMarko Leer
    May 26, 2003 at 5:06 pm
    May 27, 2003 at 2:04 pm
  • After going to: http://vectec.net:8080/mailman/admin/hchs and entering password: links: Socket Error IE: Cannot find server or DNS error Mozilla: Nothing Happens (starts to load then says done) What ...
    Cody HarrisCody Harris
    May 22, 2003 at 9:04 pm
    May 24, 2003 at 4:35 pm
  • Hi, in Germany there is a Law that forced any application to store the passwords encrypted. In all Mailman-Version i know, there is the possibility to get my own password mailed to me. That means ...
    Sven KöhlerSven Köhler
    May 14, 2003 at 9:31 pm
    May 18, 2003 at 10:35 pm
  • hi, i have aproblem... the disc on the machine run out of space some time yesterday and i've been getting a huge amount of emails like this... they are a lot and it says the errors are on different ...
    Kalin MintchevKalin Mintchev
    May 14, 2003 at 8:00 pm
    May 14, 2003 at 11:27 pm
  • Hi, I'm starting to use Mailman and my installation is on a machine that already has port 80 in use by another application (WebLogic), so I did: ./configure --with-urlhost=myhost:81 It didn't work, I ...
    René BerberRené Berber
    May 24, 2003 at 1:20 am
    May 28, 2003 at 8:25 pm
  • Hello, This is a mailman 2.1-8 on RH9. When issuing: # bin/mailmanctl start Traceback (most recent call last): File "bin/mailmanctl", line 524, in ? main() File "bin/mailmanctl", line 319, in main ...
    Bruno MattarolloBruno Mattarollo
    May 15, 2003 at 7:40 pm
    May 15, 2003 at 8:57 pm
  • HELP! I don't want to screw up the produciton server, which is the reason why I am sending this email attempting to confirm that the following won't mess up production!!!! This means that I will not ...
    May 13, 2003 at 9:54 pm
    May 14, 2003 at 4:39 pm
  • Hi, We have upgraded mailman to 2.1.1-5 on debian sid, using python version 2.2.2-6. Web interface works okay, but qrunner is failed to start normally, so no mails from the que is delviered to the ...
    Feczak SzabolcsFeczak Szabolcs
    May 4, 2003 at 9:14 pm
    May 5, 2003 at 2:08 pm
  • I'm running debian/testing and just upgraded mailman to the version in unstable (2.1.1-5). Last night the cron job to send out the monthly password reminders failed with this error: Traceback (most ...
    Rick PasottoRick Pasotto
    May 1, 2003 at 10:02 am
    May 2, 2003 at 4:53 pm
  • Hello Does anyone have a way to mass delete messages held for approval ( without selecting them all individually). Con Wieland
    May 22, 2003 at 10:19 pm
    Jun 3, 2003 at 6:12 pm
  • Greetings everyone! I am running mailman-2.0 on Redhat Linux 7.3. I have successfully installed mailman onto my server. I have sucessfully added an admin and a few users through the web interface to ...
    May 29, 2003 at 9:50 pm
    May 30, 2003 at 2:02 am
  • Details below. Thanks!
    Phil IovinoPhil Iovino
    May 29, 2003 at 8:53 pm
    May 30, 2003 at 1:10 am
  • Hello all, I have been trying to do 3 things with a new mailman install. 1. Restrict my lists so that no-one but the administrator can send messages... like a message only list. I have toyed around ...
    Lee StevensLee Stevens
    May 22, 2003 at 6:04 pm
    May 28, 2003 at 9:18 pm
  • ~mailman/bin/list_members <listname maross.net
    Mike KercherMike Kercher
    May 27, 2003 at 4:26 pm
    May 28, 2003 at 4:52 pm
  • Hello, I added an DNS aliase for this machine name to avoid displaying the real server name in the URL, which is vanuatu. Nom : vanuatu.sila.local Address: Aliases: listsrv.sila.local I ...
    Jean BertholdJean Berthold
    May 23, 2003 at 12:21 pm
    May 26, 2003 at 8:14 am
  • Hi guys, Anyone know how you can check which users on a certain list during a given mailing got the message, and which did not? I was looking through my error log thingy in mailman/logs and didn't ...
    Rajib MomenRajib Momen
    May 21, 2003 at 5:11 pm
    May 25, 2003 at 5:44 pm
  • Hello, I use Mailman through my web host (one of the reasons for choosing them, actually!), so whatever info you can supply me I will pass along to them. Is there a search capability or add-on for ...
    May 23, 2003 at 1:56 pm
    May 24, 2003 at 8:10 am
  • Hi All, I need to move/re-name a list. I have a list named Rp-ml2 need to change the name to PIMF. How do I do this with out making everybody re-subscribe? Doug ProtoCall, LLC 507 West College Avenue ...
    May 22, 2003 at 1:57 pm
    May 23, 2003 at 3:53 pm
  • Paul, here are my python versions. Looks like only one of them really and it's 2.2. [root at czss root]# which python /usr/bin/python [root at czss root]# ls -lah /usr/bin | grep python -rwxr-xr-x 2 ...
    Eliot James Ormond StockEliot James Ormond Stock
    May 21, 2003 at 7:27 am
    May 22, 2003 at 6:01 am
  • Hi all! Very (!!!) new til Mailman, but... Running FreeBSD 4.7 and the Pyhon 2.2.2_2 FreeBSD port, and are trying to install Mailman 2.1.2. The first thing I tried was installing the Mailman port ...
    Kristian WindKristian Wind
    May 20, 2003 at 7:32 pm
    May 21, 2003 at 2:48 pm
  • Richard, Thanks for the reply, I saw that before, but none of the links work and even the links for patches at sourceforge are under 2.0.x not under 2.1.x. Any idea where else I can get them as ...
    Adam LipsonAdam Lipson
    May 19, 2003 at 5:33 pm
    May 19, 2003 at 6:43 pm
  • I want to set up my list to approve all posts by members or non-members automatically, without having to go through the authorization process. -billy
    May 1, 2003 at 9:55 am
    May 19, 2003 at 2:48 am
  • OK.. 2.1.2 verision.. I have a list that currently has over 550 spam's waiting to be destroyed.... Anyone know of a simple way to just "delete all" and "ban all" in one shot? Right now it looks like ...
    Chris 12Chris 12
    May 18, 2003 at 8:43 pm
    May 18, 2003 at 11:50 pm
  • Hi! I'm new here - don't know about the do's-'n-don'ts on this list, but as my problem is urgent, I can't just wait and watch to learn about this specific list's netiquette, so please excuse if I ...
    Mit FreudeMit Freude
    May 15, 2003 at 6:28 pm
    May 15, 2003 at 8:11 pm
  • Hey all, i recently installed mailman on RedHat 9, I installed it from the files off of list.org rather than the rpm via the advice i've noticed on here. My problemo now is that i have set mailman ...
    Computing, CreativeComputing, Creative
    May 12, 2003 at 1:40 pm
    May 13, 2003 at 3:55 pm
  • hi, how can i do a custom response to the subscription request?... i have a list running on a mailman server with a lot of other lists and the client said that he wants the subscribers to his list to ...
    Kalin MintchevKalin Mintchev
    May 9, 2003 at 8:04 pm
    May 13, 2003 at 9:12 am
  • Hello everyone, I'd like to create a one-way announcement only list. I've searched the archives for how to do this, but it seems there are significant differences in the way version 2.0X vs. 2.1X ...
    Sami AbuhamdehSami Abuhamdeh
    May 9, 2003 at 9:15 pm
    May 9, 2003 at 10:39 pm
  • Hello, I had to change mailman homedir from /home/mailman to /usr/local/home/mailman. I basically grepped around /home/mailman/* to find all paths, moved /home/mailman to /usr/local/home, and changed ...
    May 9, 2003 at 10:47 am
    May 9, 2003 at 4:04 pm
  • I've got http://myserver.com and https://myserver.com both working on a linux/apache server. But, when I use https://myserver.com/mailman/admin to access it the resulting page has numerous links to ...
    Dan LeavittDan Leavitt
    May 6, 2003 at 6:44 pm
    May 8, 2003 at 7:04 pm
Group Navigation
period‹ prev | May 2003 | next ›
Group Overview
groupmailman-users @

273 users for May 2003

Jon Carnes: 87 posts Richard Barrett: 31 posts Oliver Egginger: 27 posts Paul H Byerly: 19 posts Dan Wright US2002021042: 17 posts Adam Lipson: 15 posts Kalin Mintchev: 15 posts Cody Harris: 14 posts Todd: 13 posts Schuetzen: 12 posts Mike Avery: 10 posts Barry Warsaw: 9 posts John Grafflin: 9 posts Greg Westin: 8 posts Mark Dadgar: 8 posts Phil Iovino: 8 posts Admin: 7 posts Arnar Birgisson: 7 posts Christopher Kings-Lynne: 7 posts Gabe N. Rubin: 7 posts
show more