Search Discussions

53 discussions - 179 posts

  • Hi, I am running modperl 2.x + embperl on centos 4.5 Now when i run on MaxRequestsPerChild 1 the app. runs well but as i increase its value after every third refresh of browser a blank page appears, ...
    Abhishek jainAbhishek jain
    Jan 3, 2008 at 3:59 am
    Jan 17, 2008 at 11:00 pm
  • Greetings. I have an application that accesses some relatively static database tables to create drop-down <select lists. As an example, one of these tables is a list of common commercial aircraft. At ...
    Colin WetherbeeColin Wetherbee
    Jan 13, 2008 at 7:31 pm
    Jan 15, 2008 at 7:15 pm
  • I am having problems a static mod_perl with Apache 2.2.6 and Perl 5.10.0. I followed the instructions for a static build, but when I type make I get the following errors (only a few same error lines ...
    James BreatJames Breat
    Jan 18, 2008 at 5:19 am
    Jun 16, 2009 at 9:02 pm
  • Good evening. Is it possible to un-bake a baked cookie? From the Apache2::Cookie documentation, bake() "adds a Set-Cookie header to the outgoing headers table." Is there a way to undo this without ...
    Colin WetherbeeColin Wetherbee
    Jan 5, 2008 at 2:49 am
    Jan 8, 2008 at 6:34 pm
  • I have searched through all the web docs and Usenet, but not found anything that suggests anything special has to be done in mod_perl scripts that need to set $ENV{PATH} My specific example is that I ...
    B WoosterB Wooster
    Jan 17, 2008 at 12:03 pm
    Jan 21, 2008 at 4:38 pm
  • Hello, I met a strange requirement that, given Apache has two virtual hosts, vhA and vhB, vhA's document root is: /path/a/; vhB's document root is: /path/b/. vhA's programs are running under ...
    Jeff PangJeff Pang
    Jan 12, 2008 at 3:58 am
    Jan 12, 2008 at 9:39 am
  • Hi All, I am bit confused. While reading the mod_perl book, I noticed they are using Apache::Request versus CGI for form data handling. Why is that? Is it recommended to use Apache over CGI? Any ...
    Mag GamMag Gam
    Jan 31, 2008 at 6:27 am
    Feb 1, 2008 at 3:54 am
  • Hello all Apache mod_perl2 module experts (I am a newbie with Apache), Hope I am clear in my explanations (my English is not so good and I had a lot of problems explaining my needs by mail. I am not ...
    Titetluc titetlucTitetluc titetluc
    Jan 29, 2008 at 9:51 am
    Jan 30, 2008 at 1:03 pm
  • I am currently upgrading our Apache server from 1.3 to 2.2 and I'm encountering the following error when I try to start Apache. The config works ok in 1.3, however in 2.2 I get the following error ...
    Jan 24, 2008 at 8:51 pm
    Jan 25, 2008 at 4:51 pm
  • Is there any way to get some of the pieces of an incomplete multi-part post? The situation I have is a client uploading multiple files as pieces of a POST, but then timing out in some manner whilst ...
    Jan 9, 2008 at 11:08 pm
    Jan 11, 2008 at 3:43 am
  • I've found myself writing similar bits of code repeatedly, and figure what i'm doing is probably common enough that something like this could have a place on CPAN. I'm mostly curious about if the ...
    Adam PrimeAdam Prime
    Jan 19, 2008 at 11:52 pm
    Feb 10, 2008 at 4:40 pm
  • I have a client who wants to send email from a flash script (do you call flash stuff scripts?), and he has asked me to install sendmail.php for him. I don't want to! Can anyone here recommend a ...
    Carl BrewerCarl Brewer
    Jan 28, 2008 at 11:20 pm
    Jan 30, 2008 at 5:35 pm
  • I'm in the process of updating all my packages for perl; however, mod_perl 2.0.3 fails as follows: + cd mod_perl-2.0.3 + LANG=C + export LANG + unset DISPLAY + CFLAGS=-O2 -g -pipe -march=i386 ...
    James KosinJames Kosin
    Jan 4, 2008 at 9:29 pm
    Jan 7, 2008 at 7:37 pm
  • My script looks like this use Apache2::Request (); my $req = Apache2::Request- new($r) my $data = req- {param-name} It causes a segfault error. Any ideas? Mitch Mitchell Raful MCSE CCNP MCB Quantico ...
    Raful Mr Mitchell HRaful Mr Mitchell H
    Jan 2, 2008 at 8:19 pm
    Jan 2, 2008 at 8:56 pm
  • Hi all, does mod_proxy provide more than round robin load balancing functionlity? I'd been told it could, but I can't find anything in the docs.. Martin Sent from Yahoo! Mail - a smarter inbox ...
    Martin MossMartin Moss
    Jan 31, 2008 at 11:31 am
    Jan 31, 2008 at 1:27 pm
  • Hi All, I'm using Crypt::RSA module for generating public & private keys. Now the problem is that when I'm storing the keys in the database, and again bringing them to do the signature or ...
    Jan 3, 2008 at 3:36 pm
    Jan 22, 2008 at 6:27 pm
  • Hello, what are the methods to get UserAgent setting in both mp1 and mp2? I tried search,but got no results. Thanks! Regards, Jeff Pang
    Jeff PangJeff Pang
    Jan 21, 2008 at 7:16 am
    Jan 21, 2008 at 8:19 am
  • I use "PerlConfigRequire /var/www/html/mypath/startup.pl" in httpd.conf to recompile all the CGIs. Inside startup.pl, I added the line: use lib qw(. mylib); To me amazement, after all the CGI is ...
    C chanC chan
    Jan 18, 2008 at 7:00 am
    Jan 20, 2008 at 5:43 am
  • Hi all, Just want to slap a quick note that I've tried the following combo on Win32 platform (Windows 2003 Server x86): Apache 2.2.7 from ApacheLounge (apachelounge.com) modperl 2.0.3 from theoryx5 ...
    Foo JHFoo JH
    Jan 14, 2008 at 9:13 am
    Jan 17, 2008 at 11:01 pm
  • I have my code pasted below. My module, loaded with <Location directive in Apache2, works well. However, sometimes switches don't respond correctly to bulk queries of fdbPorts object. What I want to ...
    Raful Mr Mitchell HRaful Mr Mitchell H
    Jan 14, 2008 at 1:43 pm
    Jan 14, 2008 at 6:55 pm
  • Using the debian-stable-provided version of mod_perl, I've got an app that's working fine however the way it was configured meant we were causing an early load of perl during the configuration phase ...
    Carl JohnstoneCarl Johnstone
    Jan 10, 2008 at 3:38 pm
    Jan 14, 2008 at 12:05 pm
  • I have encountered a problem with Apache2::AuthCookie (version 3.10). I have created a module which inherits from Apache2::AuthCookie, and configured a PerlAuthenHandler and a PerlAuthzHandler for a ...
    Vegard VesterheimVegard Vesterheim
    Jan 10, 2008 at 11:04 am
    Jan 10, 2008 at 3:12 pm
  • I'm trying to write a FixupHandler to clean up the query_string before it gets to the response phase. Problem is, I can't. After cleaning it up, I reassign to $ENV{QUERY_STRING} but in the called ...
    Anthony GardnerAnthony Gardner
    Jan 7, 2008 at 1:18 pm
    Jan 7, 2008 at 3:35 pm
  • 1. Do you run common web program under modperl handlers? or just run them under Registry? For me I mostly wrote web scripts with CGI methods like using CGI.pm and CGI::Session, and run them under ...
    Lists userLists user
    Jan 7, 2008 at 11:40 am
    Jan 7, 2008 at 2:20 pm
  • Hi, Suddenly on of my mod_perl handlers is broken with the following error: Can't locate object method "ip_get" via package "APR::SockAddr" at line: my $ip = $self- {r}- connection- remote_addr- ...
    Axel HuizingaAxel Huizinga
    Jan 7, 2008 at 7:33 am
    Jan 7, 2008 at 8:29 am
  • Anyone following the dialog on testers@httpd and dev@httpd is already aware of problems users are hitting with httpd 2.2.7 and modperl. Here's my current theory in search of a sanity check. There are ...
    William A. Rowe, Jr.William A. Rowe, Jr.
    Jan 6, 2008 at 12:14 am
    Jan 7, 2008 at 3:58 am
  • Hi, while testing the PerlCleanupHandler in HTML::Mason: <%init $r- push_handlers(PerlCleanupHandler = \&sleeptest); sub sleeptest { my $r = shift; $r- warn("BEFORE SLEEP"); sleep(10); $r- ...
    Louis-David MitterrandLouis-David Mitterrand
    Jan 5, 2008 at 2:11 pm
    Jan 5, 2008 at 8:31 pm
  • I keep running into methods not implemented where documentation says they are. Is it something about me or a common problem? sub handler{ my $r = shift; $r- print("hello"); } fails with "Can't locate ...
    Kate YoakKate Yoak
    Jan 4, 2008 at 9:32 pm
    Jan 4, 2008 at 9:47 pm
  • Looks like mod_perl scripts execute the line that changes $ENV{PATH}, but when a qx() back-tick command is executed, that command is executed under the value of the original path. The docs seem to ...
    B WoosterB Wooster
    Jan 30, 2008 at 2:58 pm
    Jan 31, 2008 at 3:33 pm
  • I'm trying to write a filter using modperl that will update parts of the server response on the fly. My first attempt was to rewrite the path setting in the server's set cookie response to set the ...
    J AmuseJ Amuse
    Jan 31, 2008 at 2:18 pm
    Jan 31, 2008 at 3:33 pm
  • Hello, I've written a ldap auth-authz module in mod_perl but when I give in wrong username/pass I need to close my browser in order to get the login screen again. When I try to refresh without ...
    Ward LoockxWard Loockx
    Jan 29, 2008 at 10:27 am
    Jan 29, 2008 at 10:35 am
  • Hello, I would like to be unsubscribed from this mailing list, I kindly request the moderator to unsubscribe me.. Thank you, Vijayram...
    Vijayram AryaVijayram Arya
    Jan 27, 2008 at 7:25 am
    Jan 27, 2008 at 7:44 am
  • Hello, How to install mp2 on windows XP? Does it need a VC complier? But I'm not familiar with that complier and C/C++ language. I have apache binary version installed but without modperl.thanks.
    Jennifer G.Jennifer G.
    Jan 23, 2008 at 4:38 am
    Jan 23, 2008 at 4:47 am
  • Hi All, I have written a POP3 protocol-handler which uses the PerlProcessConnectionHandler. The solution worked fine under Apache 2.0 and ModPerl 2.0, but after an upgrade to Apache 2.2 and Mod_Perl ...
    Dirk van der ZeeDirk van der Zee
    Jan 11, 2008 at 1:12 pm
    Jan 22, 2008 at 9:46 am
  • Greetings, Third time is the charm :) RC1 and RC2 were missing t/conf/extra.conf.in from the MANIFEST. I've updated the release procedure to run make disttest to identify these errors, and fixed the ...
    Fred MoyerFred Moyer
    Jan 12, 2008 at 9:19 pm
    Jan 16, 2008 at 8:29 am
  • As of patch 32953 dtrace support is in bleadperl (5.11.0). The probes are based on Alan Burlinson's original blog post on the subject: http://blogs.sun.com/alanbur/date/20050909 By guarding the ...
    Andy ArmstrongAndy Armstrong
    Jan 11, 2008 at 8:46 pm
    Jan 12, 2008 at 2:04 am
  • Hi folks I know this is off topic and hopefully if anybody knows the sendmail mailing list address please reply. My problem is that emails are going out slower and our mail queue is pretty huge. ...
    Tyler BirdTyler Bird
    Jan 11, 2008 at 9:36 pm
    Jan 12, 2008 at 1:58 am
  • Hello - Am executing several CGI scripts under mod_perl using Apache::Registry (I hope that terminology is correct). As I understand it, the scripts get cached in each httpd thread the first time ...
    Brett leeBrett lee
    Jan 9, 2008 at 10:13 pm
    Jan 10, 2008 at 2:54 am
  • Hi, I have looked through http://perl.apache.org/docs/general/testing/testing.html for a list of variables available for @@ substitution. After that I thought the best documentation is the code and ...
    Torsten FoertschTorsten Foertsch
    Jan 9, 2008 at 4:07 pm
    Jan 9, 2008 at 4:17 pm
  • Hi, I want to stop using registry script(the status_line hack does not work with the apache2/modperl that comes with Ubuntu-fiesty(, but works in Ubuntu-dapper.). Is there some other dispatcher ...
    Hemant BistHemant Bist
    Jan 4, 2008 at 3:45 pm
    Jan 4, 2008 at 5:27 pm
  • Hey Everyone, I am trying to set the allowed bitmask in a custom request handler when I receive the OPTIONS method (and when I receive a method request for a method I do not support). This includes ...
    Christopher StantonChristopher Stanton
    Jan 31, 2008 at 6:20 pm
    Jan 31, 2008 at 6:20 pm
  • Ward LoockxWard Loockx
    Jan 29, 2008 at 10:57 am
    Jan 29, 2008 at 10:57 am
  • Hello, I am running a site with a front end apache web server load balancing between multiple backend mod_perl application servers. I am using the proxy, proxy_balancer, and proxy_http modules to do ...
    Jan 28, 2008 at 4:59 am
    Jan 28, 2008 at 4:59 am
  • 我一直在使用 Gmail,我觉得您不妨也试试。现在邀请您创建帐户。 ----------------------------------------------------------------------- Mike.G 邀请您开设免费 Gmail 帐户。 要接受此邀请并注册您的帐户,请访问 ...
    Jan 26, 2008 at 3:29 am
    Jan 26, 2008 at 3:29 am
  • Configuration error :: Used "Location" where I should have used "Directory." "Actual" perl.conf file had something like: <Location /var/www/myRealDir SetHandler perl-script PerlResponseHandler ...
    Brett leeBrett lee
    Jan 25, 2008 at 7:01 pm
    Jan 25, 2008 at 7:01 pm
  • Am running on a newer OS and not seeing any compiled registry scripts when looking at "/perl-status." Am refreshing to look at several PIDs, so I suspect a config error on my part. Have found nothing ...
    Brett leeBrett lee
    Jan 23, 2008 at 5:38 pm
    Jan 23, 2008 at 5:38 pm
  • Anyone using mod_perl with GD::Graph? I am interested in generating Imagepoints -- a feature in GD::Graph. I can't seem to find any example for this, has anyone been able to find any details about ...
    Mag GamMag Gam
    Jan 23, 2008 at 1:23 pm
    Jan 23, 2008 at 1:23 pm
  • Hi, I know the modperl mailing list has been used from time to time for job offers or applications. I'd like to do the latter. I am a freelance programmer living in Germany near Heidelberg. My native ...
    Torsten FoertschTorsten Foertsch
    Jan 21, 2008 at 4:02 pm
    Jan 21, 2008 at 4:02 pm
  • I have searched through all the web docs and Usenet, but not found anything that suggests anything special has to be done in mod_perl scripts that need to set $ENV{PATH} My specific example is that I ...
    B WoosterB Wooster
    Jan 17, 2008 at 11:00 pm
    Jan 17, 2008 at 11:00 pm
  • Hi, I am attaching the bug report while installing mod_perl in Mac OS X Leopard. Can you please let me know the options I have to sort this. regards aroul.
    Aroul selvamAroul selvam
    Jan 17, 2008 at 11:00 pm
    Jan 17, 2008 at 11:00 pm
Group Navigation
period‹ prev | Jan 2008 | next ›
Group Overview
groupmodperl @
categoriesmodperl, perl

71 users for January 2008

Colin Wetherbee: 14 posts Philippe M. Chiasson: 10 posts Perrin Harkins: 9 posts Alx G: 7 posts Foo JH: 7 posts John ORourke: 6 posts Abhishek jain: 5 posts B Wooster: 5 posts Heiko Jansen: 5 posts Anthony Gardner: 4 posts Geoffrey Young: 4 posts Gerald Richter - ECOS GmbH: 4 posts Jeff Pang: 4 posts Raful Mr Mitchell H: 4 posts Torsten Foertsch: 4 posts William A. Rowe, Jr.: 4 posts Adam Prime: 3 posts Brett lee: 3 posts James Kosin: 3 posts Kate Yoak: 3 posts
show more