Search Discussions

54 discussions - 406 posts

  • Folks The price point of Intel's NUC unit makes it attractive to use as a server that doesn't have significant computational load. In my environment, a USB connected hard-drive could provide all the ...
    Jan 8, 2015 at 7:32 pm
    Jan 11, 2015 at 7:47 pm
  • I've had a few systems with a lot of RAM and very busy filesystems come up with filesystem errors that took a manual 'fsck -y' after what should have been a clean reboot. This is particularly ...
    Les MikesellLes Mikesell
    Jan 6, 2015 at 5:12 pm
    Jan 7, 2015 at 9:53 pm
  • Hi all! Using the default Gnome desktop on Centos-6, I keep having difficulty getting the mouse pointer to lineup exactly on the edge/corner of a window when I want to resize the window. It seems ...
    Fred SmithFred Smith
    Jan 9, 2015 at 2:17 pm
    Jan 12, 2015 at 5:34 pm
  • Hey All, I just installed the newest version of Firefox that was pushed to production today. When I started Firefox the CentOS 7 Is Here splash screen was displayed. Out of curiosity I clicked on the ...
    Mark LaPierreMark LaPierre
    Jan 16, 2015 at 12:05 am
    Jan 18, 2015 at 9:51 pm
  • I will try to explain this as best I can. I have two computers; one a Supermicro X10SAE running CentOS 6, the other a very old DOS box.[*] The DOS box runs a CCD camera, sending images via Ethernet ...
    Glenn EychanerGlenn Eychaner
    Jan 15, 2015 at 6:40 pm
    Jan 17, 2015 at 12:15 am
  • Happy new year ! We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't initialize at boot. Reverting to kernel ...
    Jan 5, 2015 at 3:14 pm
    Jan 15, 2015 at 6:06 pm
  • Anyone else seeing this? This is happening on a straight "Desktop" install of CentOS 6.6 fully updated. I have made no changes other than installing Thunderbird. Thunderbird will occasionally (10 to ...
    Robert NicholsRobert Nichols
    Jan 11, 2015 at 1:39 am
    Jan 12, 2015 at 1:36 am
  • I'm running centos 6.6 with the default 2.0.9-xxx dovecot. I run sa-learn against my spam_to_learn folder, then I wan to move those emails to a learned_spam folder. when I do a doveadm -Dv move -u ...
    Chuck CampbellChuck Campbell
    Jan 6, 2015 at 10:55 pm
    Jan 8, 2015 at 1:22 am
  • Hi. We have another leap second coming. Have past bugs with Centos and leap seconds (specifically high CPU spikes) been resolved? Should we be worried? -G
    G GalitzG Galitz
    Jan 15, 2015 at 4:43 pm
    Jan 15, 2015 at 9:13 pm
  • Hey all, I'm trying to learn how to use some of the big data stores. Specifically I want to learn how to use CassandraDB and Hadoop. Originally I'd had the idea of trying to setup a cassandra ring on ...
    Tim DunphyTim Dunphy
    Jan 16, 2015 at 1:24 am
    Jan 16, 2015 at 11:19 pm
  • I've got a fresh CentOS 7 test machine, fully patched. The command: shutdown -h now surprisingly does not halt the machine. Instead it reboots it. WTF? I found the following Debian discussion which ...
    Devin ReadeDevin Reade
    Jan 16, 2015 at 4:05 am
    Jan 17, 2015 at 5:00 am
  • Hello list, how can I get CentOS 7 to authenticate against a Microsoft ISA server for package installations after the OS is installed. In Debian/Ubuntu apt.conf just needs to be edited and it works ...
    Jan 14, 2015 at 8:53 pm
    Jan 16, 2015 at 9:52 pm
  • I have mostly succeeded in getting master and slave DNS servers operational. Mostly, because the zone file is not written when a zone is updated on the master server when the notify and transfer ...
    Emmett CulleyEmmett Culley
    Jan 12, 2015 at 5:28 am
    Jan 16, 2015 at 9:43 pm
  • Hello all, We have put a DNS server online running DJBDNS v1.06 (ndjbdns-1.06-1.el6.x86_64) on a 64-bit CentOS 6.6 server. We have done some limited testing on the machine which it passed - i.e., ...
    Boris EpsteinBoris Epstein
    Jan 13, 2015 at 3:53 pm
    Jan 15, 2015 at 11:54 pm
  • Hi all, I could find the 1.1 and 2 repos gently provided by Tru Huynh, but quid of a v3 of the toolset? I've just found that Qt 5.4 requires what's shipped in this v3 (gcc 4.9.1, binutils 2.24) and ...
    Jan 13, 2015 at 8:18 am
    Jan 14, 2015 at 5:11 pm
  • Hello everyone, I'm having an issue getting a C6.6 install to work on a 3 TB dual hard drive system, raid 0. I'm hoping that someone here can help. So, I install as normal, but then reboot, and it ...
    Gilbert SebensteGilbert Sebenste
    Jan 12, 2015 at 4:13 pm
    Jan 13, 2015 at 6:00 pm
  • Hi, I've launched a "yum upgrade" command on a CentOS6 laptop which has updated nearly 600 packages. Automatic updates were not working because of a conflict on a package. So the laptop is now ...
    Patrick BegouPatrick Begou
    Jan 9, 2015 at 3:31 pm
    Jan 12, 2015 at 3:51 pm
  • Hey guys, Got a quick question and I hope this is an easy one! In my /etc/logrotate.conf file I have the following entry: # rotate all of the apache logs -- we'll rotate them here /var/log/mysqld.log ...
    Tim DunphyTim Dunphy
    Jan 8, 2015 at 2:54 am
    Jan 11, 2015 at 9:41 pm
  • Hello I am thinking of buying this card to and wanted to know if this NIC is supported. The card is a Sun Microsystems PCI-X Quad-Port Gigabit Ethernet Adapter QGEXPCI 501-6738-10. Can't find any ...
    Jan 2, 2015 at 5:41 am
    Jan 3, 2015 at 8:12 pm
  • Hi, according to this : http://unix.stackexchange.com/questions/28144/after-yum-update-is-it-a-good-idea-to-restart-the-server i should reboot my server after updating packages i.e: kernel, glibc, ...
    Mateusz GuzMateusz Guz
    Jan 15, 2015 at 7:36 pm
    Jan 16, 2015 at 2:34 pm
  • Hey List, I apologize for how broad this may be, but hopefully someone here can help me out. I need to make custom kickstart installers to be used in the field to install microservers (Intel NUCs, ...
    Jan 13, 2015 at 10:01 pm
    Jan 14, 2015 at 6:12 am
  • I apologise if this is not the appropriate list for the following issue, but... Is it possible to upgrade the Linux kernel on a kickstart CD? I've changed the vmlinuz and initrd.img files in the ...
    James BishopJames Bishop
    Jan 8, 2015 at 6:18 pm
    Jan 9, 2015 at 9:50 am
  • I was surprised to find that these RPMs were modified and re-released with different sums yet identical version strings. Is this common practice?
    Jan 15, 2015 at 1:15 pm
    Jan 15, 2015 at 3:39 pm
  • Hello, What types of tests does the CentOS Development Team do for software in its repositories? Where does it get its test catalog from? I want to create a testing process which is equal to if not ...
    Somers-Harris, David | David | OPSSomers-Harris, David | David | OPS
    Jan 13, 2015 at 4:43 am
    Jan 14, 2015 at 1:51 am
  • Hi All. Looking for some guidance/experience with LVM and pvmove. I have a LUN/PV being presented from a iscsi SAN. The LUN/PV is presented to 5 servers as a shared VG they all have LV's they use for ...
    Daniel HoffmanDaniel Hoffman
    Jan 10, 2015 at 1:13 pm
    Jan 10, 2015 at 9:00 pm
  • Hi, There was an update of glibc on CentOS 6 http://lists.centos.org/pipermail/centos-announce/2015-January/020863.html and now: # needs-restarting 1 : /sbin/init How do i tell /sbin/init to use the ...
    Markus FalbMarkus Falb
    Jan 8, 2015 at 9:22 am
    Jan 9, 2015 at 1:06 am
  • Dear Sir/ Ma'am i would like to suscribe to the cenos newletter its update and patches release thanks regards b -- Bijesh Maskey 97719801095233
    Bijesh MaskeyBijesh Maskey
    Jan 4, 2015 at 6:16 am
    Jan 5, 2015 at 10:29 am
  • Can someone recommend a video card that's capable of driving a monitor at 2560x1600 or 2560x1440 and just works with Centos 7 without requiring any outside video drivers? I would prefer to stay with ...
    Frank CoxFrank Cox
    Jan 12, 2015 at 4:57 pm
    Jan 13, 2015 at 7:24 pm
  • What is the state of the art for socks5 server software? I need to replace a very old proxy system. 'Yum search' and google aren't turning up any clear winners unless '3proxy' is the thing you would ...
    Les MikesellLes Mikesell
    Jan 12, 2015 at 8:18 pm
    Jan 12, 2015 at 10:24 pm
  • A system whose network routing table looks like this (abbreviated): Destination Gateway Genmask Flags Metric Ref Use Iface U 0 0 0 eth0 ...
    Jan 4, 2015 at 6:32 pm
    Jan 5, 2015 at 10:02 am
  • I have a screwed up disk arrangement, but I have had no trouble because of it after using it over a year. Recently I did a yum update. After starting the update, which included a new kernel, it ...
    Don VogtDon Vogt
    Jan 1, 2015 at 10:49 pm
    Jan 3, 2015 at 4:38 pm
  • Happy new year !!! 2014-12-31 21:13 GMT-02:00 Fred Smith <fredex at fcshome.stoneham.ma.us :
    Marcin LageMarcin Lage
    Jan 1, 2015 at 1:48 am
    Jan 1, 2015 at 6:32 pm
  • https://rhn.redhat.com/errata/RHBA-2015-0048.html http://bugs.centos.org/view.php?id�83 Hi All, I would like to check if you are also able to see this issue. After nss-softokn-freebl upgraded to ...
    Suse ShiSuse Shi
    Jan 16, 2015 at 4:12 pm
    Jan 16, 2015 at 4:39 pm
  • Sometime ago the minimal install stopped putting a default /etc/sysconfig/iptables file which allowed only ssh, why the change? -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - ...
    Jason PyeronJason Pyeron
    Jan 15, 2015 at 7:04 pm
    Jan 16, 2015 at 3:02 pm
  • Hi, does anyone know if aide should have access to this socket? SELinux is preventing /usr/sbin/aide from write access on the sock_file /var/run/winbindd/pipe. Thanks Patrick (on CentOS6 if that ...
    Patrick BervoetsPatrick Bervoets
    Jan 13, 2015 at 10:09 am
    Jan 14, 2015 at 3:52 pm
  • hello, With CentOS 6.6, I try to configure two bonding interfaces via kickstart, but it works only with bond0, I don't understand why I can't configure bond1 the same way. I found this old post ...
    Benninger FrédéricBenninger Frédéric
    Jan 14, 2015 at 10:17 am
    Jan 14, 2015 at 10:44 am
  • Hi all! Running Centos-6.latest on an AMD six-core Vishera processor. It's been running for a year on that hardware. today I swapped out the video card (from Nvidia 9800GT to Nvidia 460 GTX) hoping ...
    Fred SmithFred Smith
    Jan 8, 2015 at 6:51 pm
    Jan 9, 2015 at 11:37 am
  • Hi, all When use Centos 6.5,kernel version 2.6.431, I have continuous messages of "Neighbour table overflow" in messages. I have modified the gc_thresh1(512) , gc_thresh2 (2048) gc_thresh3 (4096) in ...
    Zhen wangZhen wang
    Jan 8, 2015 at 3:38 pm
    Jan 8, 2015 at 5:32 pm
  • I was trying to get a new Canon laser printer LBP-7110CW to work with a CentOS 6 machine. It already has an older Canon multi-function laser MF-4720W which worked fine. Both printers are connected ...
    Emmanuel NoobadminEmmanuel Noobadmin
    Jan 18, 2015 at 8:03 am
    Jan 18, 2015 at 8:03 am
  • Analog (a) no longer seems to be maintained and (b) rebuilding the old source rpm on CentOS7 ends up with a conflict with a file named /usr/bin/analog that is owned by anaconda. So, taking a step ...
    Les MikesellLes Mikesell
    Jan 16, 2015 at 5:14 pm
    Jan 16, 2015 at 5:14 pm
  • [root at juno1 ~(keystone_admin)]# /usr/sbin/httpd -D FOREGROUND AH00548: NameVirtualHost has no effect and will be removed in the next release /etc/httpd/conf/ports.conf:7 AH00526: Syntax error on ...
    Boris DerzhavetsBoris Derzhavets
    Jan 16, 2015 at 4:51 pm
    Jan 16, 2015 at 4:51 pm
  • Forgive the out of band topic but I presume some of you here support MS desktops on your CentOS based services as do we. I am hoping that maybe one of you have run into this at some point. I am ...
    James B. ByrneJames B. Byrne
    Jan 16, 2015 at 2:38 pm
    Jan 16, 2015 at 2:38 pm
  • Hello, have any a running ldap/TLS System. On my system it is not possible to configure this correct. I have a self signed CA and certificates. All i found with google is not working :-( Have any a ...
    Günther J. NiederwimmerGünther J. Niederwimmer
    Jan 16, 2015 at 9:35 am
    Jan 16, 2015 at 9:35 am
  • hi all, i'm stuck debugging a problem that appeared after this update made it to our systems: http://lists.centos.org/pipermail/centos-announce/2015-January/020856.html GDBM_File fails simple ...
    Stijn De WeirdtStijn De Weirdt
    Jan 16, 2015 at 8:57 am
    Jan 16, 2015 at 8:57 am
  • Send CentOS-announce mailing list submissions to centos-announce at centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, ...
    Jan 15, 2015 at 12:00 pm
    Jan 15, 2015 at 12:00 pm
  • Hello, I have two identical servers in hardware. I installed both with CentOS. I did LVM snapshots before updating to test LVM merging. On one server I merged all filesystem's during boot because ...
    Jan 14, 2015 at 3:13 pm
    Jan 14, 2015 at 3:13 pm
  • Send CentOS-announce mailing list submissions to centos-announce at centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, ...
    Jan 13, 2015 at 12:00 pm
    Jan 13, 2015 at 12:00 pm
  • Hi list, i have an error when i do an lvm snapshot. The error is like this when i use the command "/sbin/lvcreate -L20G -s -n <snapshot /dev/vgraid/vm" : *semid 5013504: semop failed for cookie ...
    Cristian Del CarloCristian Del Carlo
    Jan 12, 2015 at 9:08 am
    Jan 12, 2015 at 9:08 am
  • Send CentOS-announce mailing list submissions to centos-announce at centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, ...
    Jan 9, 2015 at 12:00 pm
    Jan 9, 2015 at 12:00 pm
  • All, What is the state of SSI (single system image) on CentOS 6/7 these days? I'm interested in this at present just for the fun aspect of trying it. Obviously openMosix is no more, but OpenSSI, ...
    Steve ThompsonSteve Thompson
    Jan 8, 2015 at 4:41 pm
    Jan 8, 2015 at 4:41 pm
Group Navigation
period‹ prev | Jan 2015 | next ›
Group Overview
groupcentos @

117 users for January 2015

Les Mikesell: 27 posts Warren Young: 22 posts John R Pierce: 20 posts Valeri Galtsev: 17 posts Always Learning: 16 posts Robert Nichols: 11 posts Fred Smith: 10 posts Gordon Messmer: 10 posts Jonathan Billings: 9 posts Somers-Harris, David | David | OPS: 9 posts Bill Maltby (C4B): 8 posts Johnny Hughes: 8 posts Akemi Yagi: 7 posts Digimer: 7 posts F. Mendez: 6 posts James B. Byrne: 6 posts Mateusz Guz: 6 posts Nux!: 6 posts Philippe BOURDEU d'AGUERRE: 6 posts Centos-announce-request: 5 posts
show more