FAQ

Search Discussions

120 discussions - 752 posts

  • I want to set up a new CentOS install using version 7 and would like to experiment with various RAID levels. Anyone care to point out a tutorial? TIA Dave -- We hang petty thieves and appoint great ...
    Dave StevensDave Stevens
    Sep 8, 2014 at 2:19 am
    Sep 17, 2014 at 2:32 am
  • I just updated firefox, here at home... and when I fired it back up, *all* of my tabs were gone. Every one (all couple dozen...) mark, CentOS 6.5
    Mark RothMark Roth
    Sep 25, 2014 at 12:41 am
    Sep 27, 2014 at 3:53 am
  • So the dell tech says it only supports ATA (IDE) mode. [Sorry for the accidental forward] Now I have to find an alternative to supporting a SSD boot device on a SATA port in IDE (ATA) mode. -Jason -- ...
    Jason PyeronJason Pyeron
    Sep 5, 2014 at 6:24 pm
    Sep 9, 2014 at 2:55 pm
  • Just FYI: I had several problems to install CentOS 7 with 512 MB RAM. No log showed me that problem (I would expect a system check before). With 1 GB RAM everything runs fine. Don't know, what they ...
    Oliver SchadOliver Schad
    Sep 7, 2014 at 5:45 pm
    Sep 9, 2014 at 12:46 am
  • In need of a new printer, having done a bit or research, and considering either the Canon PIXMA mg5420 or the HP Photo Smart 7520. There are Linux drivers for the Photosmart which are supposed to ...
    KenKen
    Sep 8, 2014 at 11:06 pm
    Sep 13, 2014 at 10:10 pm
  • I have a curious problem with an old WRT54GL router, which I use as a WiFi access point on my LAN: Internet- ADSL modem- CentOS-7 computer- WRT54GL router The router has always had a slight problem ...
    Timothy MurphyTimothy Murphy
    Sep 17, 2014 at 5:49 pm
    Oct 9, 2014 at 10:03 am
  • Good afternoon! After applying the latest bash RPM listed at http://lists.centos.org/pipermail/centos-announce/2014-September/020594.html : The fixed RPM (bash-3.2-33.el5_10.4.x86_64.rpm) DOES work ...
    Jessica BlankJessica Blank
    Sep 26, 2014 at 8:02 pm
    Oct 14, 2014 at 7:59 pm
  • You should 'yum update' as soon as possible to resolve this issue. Here's why you should care ...
    Jim PerrinJim Perrin
    Sep 24, 2014 at 3:26 pm
    Sep 26, 2014 at 11:27 pm
  • Hi folks, Is able SAMBA on CentOS 7 to work as Active Directory Domain Controller? If it's not, what is the recommended way of doing? Compiling from sources? Install packages from SerNet? Thanks in ...
    Sergio BelkinSergio Belkin
    Sep 6, 2014 at 8:15 pm
    Sep 23, 2014 at 7:27 pm
  • Hi! I installed CentOS 7 today, it's a minimal install, so it didn't have ifconfig command. So I installed net-tools, however I can't add ipv6 address to it. # ifconfig enp0s3 add fc00::1002/124 ...
    dEdE
    Sep 7, 2014 at 8:24 am
    Sep 21, 2014 at 3:19 pm
  • Can I directly upgrade (update?) from my current 6.5 box to version 7? Or, must I wipe my drives and install from scratch? mw -- -- "Lose not thy airspeed, lest the ground rises up and smites thee." ...
    Mike WatsonMike Watson
    Sep 9, 2014 at 4:33 pm
    Sep 10, 2014 at 7:11 pm
  • Hi I have a dell 770 bios sees 8g I beleive Ive *vi /etc/yum.repos.d/CentOS-Base.repo* *[centosplus]name=CentOS-$releasever - ...
    Bob MetelskyBob Metelsky
    Sep 8, 2014 at 5:52 pm
    Sep 10, 2014 at 11:27 am
  • I am running CentOS 6.5. I know this is not a CentOS specific problem. Netstat shows several open ports and no pid. tcp 0 0 *:48720 *:* LISTEN - tcp 0 0 *:43422 *:* LISTEN - udp 0 0 *:50216 *:* - How ...
    Kqt4at5vKqt4at5v
    Sep 19, 2014 at 1:45 pm
    Sep 19, 2014 at 3:07 pm
  • Hi, folks, I'm installing a RAID controller card for a large external RAID box in a Dell server. I've got two riser slots available. Here's the question: the controller card has some large chips on ...
    Mark RothMark Roth
    Sep 16, 2014 at 7:29 pm
    Sep 17, 2014 at 7:50 am
  • Hi, firefox does not play h.264 videos on centos 7 so I need a flash plugin. But I see packages only for centos 6.x. What can I do? - Gergely
    Gergely BudayGergely Buday
    Sep 8, 2014 at 3:39 pm
    Sep 11, 2014 at 3:17 pm
  • Hi, I am running 64 bit CentOS 6.5, and have an intermittent problem where the desktop crashes with the following error nouveau E[Xorg 6062]] failed to idle channel 0xccc0000 The only route I have ...
    Jan TaylorJan Taylor
    Sep 12, 2014 at 1:20 pm
    Sep 15, 2014 at 2:31 pm
  • Hi list, I'm trying Centos7 and using systemD. I've noticed that interfaces name does not have anymore eth0,eth1, ethN but a different name. What do you think about predictable network if name ...
    Alessandro BaggiAlessandro Baggi
    Sep 24, 2014 at 2:04 pm
    Sep 24, 2014 at 7:19 pm
  • I have one user. We've pretty much all got two monitors, but he insists on rotating both of them vertically - that is, they're taller than they are wide, and he's got a Radeon card. I always have X ...
    Mark RothMark Roth
    Sep 22, 2014 at 9:06 pm
    Sep 24, 2014 at 2:06 pm
  • I am using CentOS 6.5. I am using kernel 2.6.32-431.11.2.el6.i686 and there is a newer version 2.6.32-431.29.2.el6.i686 available. Where can I find documentation that tells me the difference in the ...
    Kqt4at5vKqt4at5v
    Sep 16, 2014 at 1:49 pm
    Sep 18, 2014 at 4:13 pm
  • I think my software updates are not working. I know a Firefox update was announced yesterday but when I try sudo yum update I get a message saying that no packages are marked for update. I tried sudo ...
    Joseph GodinoJoseph Godino
    Sep 19, 2014 at 6:06 pm
    Sep 22, 2014 at 3:33 am
  • Hi. I've found inconstancy between output of repoquery and rpm. I was looking forward towards apache php 5.4 module which must provided by some package SCL (can someone tell me?). rpm -qf ...
    dEdE
    Sep 16, 2014 at 4:46 am
    Sep 18, 2014 at 8:26 am
  • Well, I've set up one of our new JetStors. xfs took *seconds* to put a filesystem on it. We're talking what df -h shows as 66TB. (Pardon me, my mind just SEGV'd on that statement....) Using bonnie++, ...
    Mark RothMark Roth
    Sep 25, 2014 at 7:41 pm
    Sep 25, 2014 at 9:25 pm
  • Hi, My bosses are running into an issue, where we type "ls" on a nfs mounted filesystem, and files that are there are not listed... I thought it was pilot error until my big boss showed me... but we ...
    Dan HyattDan Hyatt
    Sep 22, 2014 at 3:48 pm
    Sep 25, 2014 at 9:15 pm
  • During a routine trawl through the ext3 files, I found some astronomical file sizes, billions and billions of GB. They also has strange user and group names. I can not delete these "weird files" (the ...
    Always LearningAlways Learning
    Sep 13, 2014 at 5:20 pm
    Sep 14, 2014 at 7:21 pm
  • All, One server of mine running CentOS 6.3. The load is very high, but few process in running or blocked. Followed is the output of /proc/stat, /proc/loadavg and top /proc/stat cpu 5351723 61716 ...
    Mingfei HuaMingfei Hua
    Sep 11, 2014 at 6:54 am
    Sep 12, 2014 at 10:17 am
  • So much for elrepo being a painless way to get working Nvidia drivers... Yum update (or just update glibc) says: -- Processing Dependency: /usr/sbin/ldconfig for package ...
    Les MikesellLes Mikesell
    Sep 9, 2014 at 3:49 pm
    Sep 9, 2014 at 8:24 pm
  • Hi there, I installed centos 7 -- it works great. What made me think is that installation took 1300 packages for a Desktop with some add-ons. As usual, there might be a solution for this already but ...
    Gergely BudayGergely Buday
    Sep 6, 2014 at 4:46 pm
    Sep 6, 2014 at 11:17 pm
  • I've used Brothers printer driver installer tool to install drivers on C7 for a DCP7650DN. Cups thinks printing is working fine, but nothing ever arrives at the printer: the printer remains asleep ...
    Fred SmithFred Smith
    Sep 3, 2014 at 10:19 pm
    Sep 4, 2014 at 12:00 am
  • I've had a request to downgrade R on one server, to match three others (someone who's just left had important scripts, and I assume they break going a full subrelease...). The server they want ...
    Mark RothMark Roth
    Sep 2, 2014 at 6:37 pm
    Sep 3, 2014 at 8:19 pm
  • There is a README file on CentOS 7 in /etc/init.d that says Note that traditional init scripts continue to function on a systemd system. An init script /etc/rc.d/init.d/foobar is implicitly mapped ...
    Jerry GeisJerry Geis
    Sep 25, 2014 at 6:39 pm
    Sep 26, 2014 at 6:57 am
  • is rpmforge now considered 'friendly' with EPEL? I normally only use EPEL as an addition repo, but one package I want to install on this one system is ffmpeg, and I'm finding it on rpmforge only.. ...
    John R PierceJohn R Pierce
    Sep 18, 2014 at 8:02 pm
    Sep 19, 2014 at 9:23 am
  • Digging into this, as we rework it, here's a question: assuming the system being pxebooted is server 1, and the tftp server is server 2, on server 2, in the menu for pxeboot, is there any way to ...
    Mark RothMark Roth
    Sep 17, 2014 at 9:13 pm
    Sep 18, 2014 at 8:23 pm
  • Having problems with Tripwire on C6, I installed AIDE from the base repository. x86_64 0.14-3.el6_2.2 base 123 k typing: aide result: "Couldn't open file /var/lib/aide/aide.db.gz for reading" ...
    Always LearningAlways Learning
    Sep 9, 2014 at 7:48 pm
    Sep 17, 2014 at 10:36 pm
  • I've installed centos 7 64 bit and would like to install xfce and yumex. I've had no success doing either despite installing the EPEL repo. I keep getting "no package yumex available." Are they ...
    Bob Goodwin - Zuni, Virginia, USABob Goodwin - Zuni, Virginia, USA
    Sep 12, 2014 at 4:00 pm
    Sep 12, 2014 at 5:54 pm
  • http://www.inateck.com/inateck-kt4005-4-port-usb-3-0-pci-express-card-no-additional-power-connection-needed/ Will these work under Centos 6.x? Can I just boot my home system with a CentOS 6.x live CD ...
    MattMatt
    Sep 5, 2014 at 8:12 pm
    Sep 9, 2014 at 10:18 pm
  • Is Centos team going to publish a correct version of php-mcrypt via yum? Centos 6.5 and now 7 is out but no php-mcrypt. php-mcrypt is used by lots of applications. and the one from EPEL repository is ...
    Mn 320Mn 320
    Sep 7, 2014 at 10:44 pm
    Sep 7, 2014 at 11:28 pm
  • Hi all, I am doing some tests with a CentOS7 vm image before to enter in our production environment. I need to migrate some sysvinit scripts to systemctl. In all of them I need to launch some daemons ...
    C. L. MartinezC. L. Martinez
    Sep 1, 2014 at 10:10 am
    Sep 2, 2014 at 6:00 pm
  • Hi, I am running centos6-5 on dell620 blades. mirrored local root drives several (including home) mounted filesystems. The other blades are working fine. Top indicates the server is running 1% cpu, ...
    Dan HyattDan Hyatt
    Sep 17, 2014 at 9:41 pm
    Sep 18, 2014 at 7:48 am
  • If I have multiple files in cron.weekly and one script takes hours to finish. Will it block other scripts in cron.weekly?
    MattMatt
    Sep 16, 2014 at 7:24 pm
    Sep 16, 2014 at 10:56 pm
  • There seems to be a problem with my local dns server resolving mirror.centos.org. I know something about dns but obviously not enough to figure out what might be wrong here or how to fix this in bind ...
    Alexander KirillovAlexander Kirillov
    Sep 5, 2014 at 7:15 pm
    Sep 7, 2014 at 8:05 pm
  • In C5.10 when I do a "ls -al" (or .l as I am lazy) I see:- drwxr-xr-x 2 root root 4096 Dec 4 2013 alias In C6.5 (2.6.32-431.23.3.el6.x86_64) I see:- drwxr-xr-x. 2 root root 4096 Sep 9 04:26 conf ...
    Always LearningAlways Learning
    Sep 21, 2014 at 10:36 pm
    Sep 22, 2014 at 3:33 am
  • Have a few Supermicro based CentOS boxes at remote date center. Is there anyway to do a remote KVM over TCP to them for the case when they do not seem to come back after a reboot?
    MattMatt
    Sep 18, 2014 at 7:59 pm
    Sep 18, 2014 at 10:11 pm
  • I can easily save cron jobs in a file by doing this: crontab -l file.txt And I can restore it with crontab file.txt Is there any way to do the same thing with at jobs? The closest thing that I've ...
    Frank CoxFrank Cox
    Sep 18, 2014 at 4:35 pm
    Sep 18, 2014 at 6:12 pm
  • I just finished setting this computer up again from scratch since the hard drive died yesterday, and when reinstalling the software that was there before, I discovered that the following packages are ...
    Frank CoxFrank Cox
    Sep 17, 2014 at 12:39 am
    Sep 17, 2014 at 12:39 pm
  • Hi, anybody got wml running under centos7? Got problems either compiling it or finding an rpm. TIA for any hint! Regards Michael
    Michael KressMichael Kress
    Sep 13, 2014 at 2:21 pm
    Sep 15, 2014 at 10:30 pm
  • Hi List Is there going to CentOS 7 for i686 architecture ? If yes , when will it be released ? Thanks Jatin
    Jatin DaveyJatin Davey
    Sep 12, 2014 at 12:53 pm
    Sep 12, 2014 at 4:09 pm
  • yum update ... Updating: VirtualBox-4.3 x86_64 4.3.16_95972_el7-1 virtualbox 69 M flash-plugin x86_64 11.2.202.406-release adobe-linux-x86_64 6.9 M libcacard x86_64 10:1.5.3-60.el7_0.7.0.1 updates ...
    Frank CoxFrank Cox
    Sep 10, 2014 at 4:40 am
    Sep 11, 2014 at 11:55 am
  • I'm having a few issues with firewalld on a CentOS 7 install, in particular when using systemctl to start/check the status of the daemon: Checking the firewalld daemon status ...
    Aled ParryAled Parry
    Sep 9, 2014 at 3:17 pm
    Sep 11, 2014 at 7:54 am
  • Dear Centos User I am trying to install package like 1) pymol 2 Xmgrace But unable install this package, showing this error. I search for this error in google, but the suggestions given there is not ...
    MOHD HOMAIDUR RAHMANMOHD HOMAIDUR RAHMAN
    Sep 11, 2014 at 5:05 am
    Sep 11, 2014 at 5:53 am
  • As a matter of interest, why does systemd start sessions every couple of minutes? And if it is completely standard, is it necessary to inform me of this in /var/log/messages? -- Timothy Murphy ...
    Timothy MurphyTimothy Murphy
    Sep 6, 2014 at 12:01 pm
    Sep 6, 2014 at 7:37 pm
Group Navigation
period‹ prev | Sep 2014 | next ›
Group Overview
groupcentos @
categoriescentos
discussions120
posts752
users170
websitecentos.org
irc#centos

170 users for September 2014

Mark Roth: 68 posts Valeri Galtsev: 56 posts John R Pierce: 34 posts Keith Keller: 29 posts dE: 21 posts Les Mikesell: 21 posts Always Learning: 19 posts Centos-announce-request: 16 posts Johnny Hughes: 16 posts Frank Cox: 15 posts James Hogarth: 15 posts Warren Young: 13 posts Jonathan Billings: 11 posts Leon Fauster: 11 posts Andrew Holway: 9 posts Fred Smith: 9 posts Tom Bishop: 9 posts Dan Hyatt: 8 posts Jim Perrin: 8 posts Richard Ray: 8 posts
show more
Archives