FAQ

Search Discussions

112 discussions - 552 posts

  • We use a dual homed CentOS-6.3 host for our Internet gateway router. Its internal nic (eth1) is configured such that the address 192.168.0.1 is one of its aliases. # cat ...
    James B. ByrneJames B. Byrne
    Sep 4, 2012 at 2:34 pm
    Sep 10, 2012 at 7:05 am
  • Hi All. I have a CentOS server: CentOS 5.6 x86_64 2.6.18-238.12.1.el5.centos.plus e4fsprogs-1.41.12-2.el5.x86_64 which has a 11TB ext4 filesystem. I have problems with running fsck on it and would ...
    Rafał RadeckiRafał Radecki
    Sep 27, 2012 at 4:10 am
    Sep 29, 2012 at 1:09 pm
  • Greetings, I have accounts on two Centos servers, A and B, each hosted on a remote VPS by a different provider/datacenter. Until yesterday night, I could connect without problems via SSH to both ...
    M. FiorettiM. Fioretti
    Sep 14, 2012 at 11:09 am
    Sep 18, 2012 at 8:56 am
  • I am trying to create a CF card that boots 686 CentOS 6.3 On boot I get a message about /dev/disk/by-label/\x2f where \x2f is "/" cannot be found. Adding rdshell to the boot line and booting up sure ...
    Jerry GeisJerry Geis
    Sep 14, 2012 at 11:50 am
    Sep 17, 2012 at 3:54 pm
  • Hello, This is on Centos 6 and not something I think is wrong with Centos 6 but I am looking to see if anybody else has experienced this and if there is solution. So thanks up front for indulging ...
    Steve ClarkSteve Clark
    Sep 26, 2012 at 12:15 pm
    Oct 12, 2012 at 2:23 am
  • Dear Friends, I have postfix mail server it is running fine . In my mail server all users are virtual. Can I merge all users with his/her mails in mysql or postgresql database. -- Thanks & Regards ...
    Jiten jhaJiten jha
    Sep 10, 2012 at 12:57 am
    Sep 17, 2012 at 10:25 pm
  • Hello! I would like to setup an NTP server for my Windows network using CentOS 6.3 with firewall turned on. As I learned the NTP protocol uses port 123 UDP. I have two NIC cards. One for internal ...
    Artifex MaximusArtifex Maximus
    Sep 2, 2012 at 3:46 am
    Sep 4, 2012 at 6:18 am
  • we have close to 50 servers. I would like to have X11 libraries (and devel). Instead of installing them one by one on all servers, I would like to have them in a central NFS location and have my app ...
    RitaRita
    Sep 16, 2012 at 8:29 am
    Sep 21, 2012 at 11:28 am
  • Dear All, We recently reinstalled our computing cluster. We were using CentOS 5.3 (32 bits). It is now CentOS 6.3 (64 bits), installed from the CentOS 6.2 x64 CD, then upgraded to 6.3. We have some ...
    Jérémie Dubois-LacosteJérémie Dubois-Lacoste
    Sep 26, 2012 at 12:14 pm
    Oct 1, 2012 at 5:59 am
  • Greetings, I run my own email server for some domains I administer, on a centos vps server with a very small number of users. The only services are smtp, imap/pop, webmail Everything was running ...
    Marco FiorettiMarco Fioretti
    Sep 6, 2012 at 1:14 pm
    Sep 8, 2012 at 7:35 am
  • I run VMware vSphere 4 Essentials with three almost identically configured ESXi 4.1 hosts and a mix of 32 and 64 bit guests including Windows 2003 and 2008 as well as CentOS 5 and 6. Recently I ...
    Tilman SchmidtTilman Schmidt
    Sep 11, 2012 at 3:06 pm
    Mar 12, 2013 at 11:04 am
  • Sent from my BlackBerry wireless device from MTN -----Original Message----- From: adekunleadekoya at gmail.com Date: Fri, 28 Sep 2012 18:49:33 To: <CentOS at mailing.list Reply-To: adekunleadekoya at ...
    AdekunleadekoyaAdekunleadekoya
    Sep 28, 2012 at 3:06 pm
    Oct 1, 2012 at 3:56 am
  • A CentOS 6.3 box ("host") runs several KVM virtual machines, each of which has two interfaces attached to the two bridges br1 and br2 (and each thus has two IP's; one on 192.168.0.0/22 and one on ...
    Steve ThompsonSteve Thompson
    Sep 10, 2012 at 12:34 pm
    Sep 15, 2012 at 8:49 am
  • I am trying to find out why my group names are showing as nobody. I have a CentOS 6 system that is acting as a NFS server. I have some older fedora clients where the group name shows up fine, but ...
    Ryan PalamaraRyan Palamara
    Sep 11, 2012 at 9:37 am
    Sep 13, 2012 at 9:31 am
  • Greetings, I have been searching for some application with functionalities like MODI (Microsoft office Document Imaging) Many I have checked does not cut it or not cross platform. Evince just allows ...
    Rajagopal SwaminathanRajagopal Swaminathan
    Sep 23, 2012 at 11:49 am
    Sep 23, 2012 at 3:40 pm
  • How do I get a flash plugin to work with firefox? I thought that I installed it correctly, but I have yet to see any flash videos through firefox. I keep being told that I need an additional plugin ...
    Michael HennebryMichael Hennebry
    Sep 16, 2012 at 2:37 pm
    Sep 17, 2012 at 2:38 pm
  • Hi, I have a 24TB RAID6 disk with a GPT partition table on it. I need to partition it into 2 partitions one of 16TB and 1 of 8TB to put ext4 filesystems on both. But I really need to do this ...
    Tony MolloyTony Molloy
    Sep 13, 2012 at 4:16 pm
    Sep 15, 2012 at 4:06 am
  • Hey All, Is there anything available in the CentOS 6.3 software catalog that can play a DVD? I am loath to install software from external repositories. That only leads to headaches. -- ?v? /(_)\ ^ ^ ...
    Mark LaPierreMark LaPierre
    Sep 9, 2012 at 4:21 pm
    Sep 11, 2012 at 7:59 pm
  • I have some clients that run centos6 and I need to have users be able to access the "failsafe terminal" from the login screen. The old options (from 4/5) for choosing your session aren't present ...
    Miranda Hawarden-OgataMiranda Hawarden-Ogata
    Sep 27, 2012 at 11:36 pm
    Oct 4, 2012 at 7:11 pm
  • Dear All, I would like to make a whole lot of homedirs without Documents, Downloads , .... like it was in CentOs5. I know I have to adapt something in /etc/skel but cannot find out how to do it ...
    Johan VermeulenJohan Vermeulen
    Sep 26, 2012 at 6:30 am
    Sep 26, 2012 at 8:53 am
  • Hi all, Last week I have migrated 5 CentoS 6.2 servers to CentOS 6.3. In all of them, I receive every day problems with logwatch: /etc/cron.daily/0logwatch: Can't exec "sendmail": No such file or ...
    C. L. MartinezC. L. Martinez
    Sep 12, 2012 at 3:19 am
    Sep 12, 2012 at 6:58 am
  • Hi, I've just got possession of a Dell PE R720 with 2 MD1200 disk enclosures. Both MD1200 are fully populated with 12 x 3 TB disks The system will basically be a student file-server running CentOS ...
    Tony MolloyTony Molloy
    Sep 4, 2012 at 7:10 am
    Sep 5, 2012 at 3:46 pm
  • Hi, Some of you have heard of CRIME, probably. from https://bugzilla.redhat.com/show_bug.cgi?id�7051 But there are other services but http that use ssl and are vulnerable? What is the optimal place ...
    Markus FalbMarkus Falb
    Sep 24, 2012 at 7:07 am
    Sep 25, 2012 at 11:13 am
  • whats the state of support for self-encrypting drives in CentOS 6 ? these are becoming increasingly common on both laptops and for enterprise storage (particularlly nearline), with features like ...
    John R PierceJohn R Pierce
    Sep 18, 2012 at 9:12 pm
    Sep 23, 2012 at 1:54 pm
  • Hello all. Does anyone have any suggestions for making centos cloud images that can automatically repartition the root device to resize the filesystem? All the Ubuntu UEC images do this, so using the ...
    Abel LopezAbel Lopez
    Sep 21, 2012 at 5:19 pm
    Sep 22, 2012 at 4:21 am
  • Newcomer to CentOS, have signed up for the mailing lists and tried unsuccessfully to find newsfeeds for the forums. Hoping someone here might know better? Thanks.
    HakanHakan
    Sep 10, 2012 at 7:25 pm
    Sep 12, 2012 at 1:10 pm
  • Hello all, If I were looking for a load balancer to run on a Linux - specifically, CentOS - machine - what would you recommend? Thanks. Boris.
    Boris EpsteinBoris Epstein
    Sep 28, 2012 at 10:45 am
    Oct 1, 2012 at 6:16 am
  • Dear Friends, I have postfix mail server When I try to install amavisd-new, clamAV, SpamAssassin follow this link "http://wiki.centos.org/HowTos/Amavisd". I have done all the configuration after that ...
    Jiten jhaJiten jha
    Sep 17, 2012 at 7:45 am
    Sep 18, 2012 at 2:01 am
  • Hi We like to build Diskless clusters. Where should we go to know how to build Diskless X server running in Centos6.2? Y.Nishimura
    Nishi.plalaNishi.plala
    Sep 15, 2012 at 12:54 am
    Sep 17, 2012 at 5:18 pm
  • I am new to CentOS and have installed the dgap rpm for the mentioned 16 port board. I turned on in Services dgap. However, when I reboot the system the ttys disappear. Could it be that the udev rpm ...
    Sidney AbrahamsSidney Abrahams
    Sep 14, 2012 at 11:14 am
    Sep 17, 2012 at 10:24 am
  • Dear all, Dear support and users: Sorry to trouble you! I configure the shorewall firewall to forward ftp and ssh port to another server, but failed. Can you help me check? I cannot login both SSH ...
    MuizMuiz
    Sep 27, 2012 at 4:58 am
    Sep 29, 2012 at 5:18 pm
  • Greetings, We have been attempting to set up a centos ldap server and then tried to log in with a user account specified in our ldap environment on a centos workstation. As soon as we attempt any ...
    Darod ZyreeDarod Zyree
    Sep 21, 2012 at 11:05 am
    Sep 21, 2012 at 5:56 pm
  • Recently we began seeing lots of these log entries on our off-site mx smtp host. I have googled this but I am not clear from what I have read if this is something we can stop altogether or should ...
    James B. ByrneJames B. Byrne
    Sep 20, 2012 at 11:07 am
    Sep 20, 2012 at 4:12 pm
  • Dear Friend, I have postfix mail server. I open my mail server and put my username = jha and password= 123456 it is giving my error "*ERROR*Unknown user or password incorrect." and In a log it is ...
    Jiten jhaJiten jha
    Sep 20, 2012 at 3:46 am
    Sep 20, 2012 at 12:25 pm
  • Hello, I have been using chrome for a while now on other systems. I am having an issue finding Chrome for Centos. Can anyone point me in the right direction? Thnx. -- Regards Robert Linux The ...
    Robert SpanglerRobert Spangler
    Sep 19, 2012 at 5:45 pm
    Sep 19, 2012 at 6:46 pm
  • Don't know if anyone here can help me or not, but here's my problem: I have a django app. I develop on a Mac, but it's deployed on CentOS. I've been doing it like this for a long time with no ...
    Larry MartellLarry Martell
    Sep 12, 2012 at 11:52 am
    Sep 13, 2012 at 11:56 am
  • Dear Friends, I want to configure ClamAV with Milter-Manager and Spam-assassin for postfix mail server I have checked and search on google but not getting any good answer and any web site Please help ...
    Jiten jhaJiten jha
    Sep 12, 2012 at 7:52 am
    Sep 12, 2012 at 3:59 pm
  • I have been given a replacement monitor for my CentOS-6.3 KVM test platform. It is an LG E2251 22in letterbox format screen whereas the unit it replaces was a 17" standard format display. The console ...
    James B. ByrneJames B. Byrne
    Sep 11, 2012 at 3:21 pm
    Sep 11, 2012 at 7:01 pm
  • Hello All, CentOS release 6.3 (Final) I am getting e-mails now where they are: Subject: Cron <root at www /usr/share/spamassassin/sa-update.cron 2 &1 | tee -a /var/log/sa-update.log Body: http: GET ...
    Jason T. Slack-MoehrleJason T. Slack-Moehrle
    Sep 19, 2012 at 11:45 am
    Feb 10, 2013 at 10:17 am
  • Hello, My name is Manfred. I have to install a flexlm license server on a pc with centos 6.3 as operating system. This machine contains two network cards. An Ethernet card and a wifi card. For the ...
    KNOPS ManfredKNOPS Manfred
    Sep 27, 2012 at 1:19 am
    Sep 27, 2012 at 3:06 am
  • I have been using BackupPC via rsync daemons on the target machines and all has been working well. At least until about the time rsync went to version 3.0.6. Since then backups have been failing for ...
    Emmett CulleyEmmett Culley
    Sep 25, 2012 at 11:33 pm
    Sep 26, 2012 at 10:25 pm
  • Dear All On my server , the /var/spool/mail/root is getting very big in size . To free up more space, can you please let me know how can I solve my problem ? Thank you
    Hadi MotamediHadi Motamedi
    Sep 25, 2012 at 6:02 am
    Sep 25, 2012 at 6:58 am
  • Dear All, first of all I must admit I posted this problem on the CentOs forum yesterday, with 0 replies so far. :-( I'm googling this problem all weekend, and getting a bit desperate actually. I'm ...
    Johan VermeulenJohan Vermeulen
    Sep 24, 2012 at 6:13 am
    Sep 24, 2012 at 10:43 am
  • Hi, Are there tutorials available in official CentOS documentation for writing RPM Spec file Regards Kaushal
    Kaushal ShriyanKaushal Shriyan
    Sep 22, 2012 at 10:19 pm
    Sep 23, 2012 at 6:09 am
  • CentOS 6.3. *Just* updated, including most current selinux-policy and selinux-policy-targeted. I'm getting tons of these, as in it's just spitting them out when I tail -f /var/log/messages: Sep 13 ...
    Mark RothMark Roth
    Sep 13, 2012 at 4:06 pm
    Sep 15, 2012 at 6:04 am
  • Dear All, I'm thinking about connecting the 15 or so laptops in our organisation to LDAP. Now I'm trying to use nscd in order to enable the users to work when being offline. The test laptop is ...
    Johan VermeulenJohan Vermeulen
    Sep 5, 2012 at 3:40 am
    Sep 5, 2012 at 5:07 am
  • Suppose you have server A and server B. Server B is running 60 seconds too fast, while server A is accurate. Is there a way to gradually move server B's time back into sync with server A, without ...
    Sean CarolanSean Carolan
    Sep 4, 2012 at 12:17 pm
    Sep 4, 2012 at 1:33 pm
  • Dear CentOS users, I run a small Facebook game at a CentOS 6.3 machine with PostgreSQL 8.4.3 + few PHP scripts + 1 Perl daemon and even though the server worked ok, I've suggested my users to double ...
    Alexander FarberAlexander Farber
    Sep 29, 2012 at 1:01 pm
    Oct 1, 2012 at 5:55 am
  • Dear All My server got inconsistency from sudden power cut that I fixed it with #fsck -fvy /dev/hda at the maintenance prompt . But after reboot, one of the installed applications is preventing it ...
    Hadi MotamediHadi Motamedi
    Sep 29, 2012 at 4:45 am
    Oct 1, 2012 at 12:38 am
  • Hi. On one of my servers aide just reported inode changes to a large bunch of files in a variety of directories, e.g. /usr/bin, /usr/sbin etc. This machine sits behind a couple of firewalls and it ...
    Jobst SchmalenbachJobst Schmalenbach
    Sep 27, 2012 at 10:03 pm
    Oct 1, 2012 at 12:03 am
Group Navigation
period‹ prev | Sep 2012 | next ›
Group Overview
groupcentos @
categoriescentos
discussions112
posts552
users139
websitecentos.org
irc#centos

139 users for September 2012

Mark Roth: 29 posts Les Mikesell: 25 posts James B. Byrne: 20 posts Centos Announce Request: 17 posts John R Pierce: 17 posts Jiten jha: 16 posts Leonard den Ottolander: 16 posts Leon Fauster: 15 posts Jerry Geis: 12 posts Nux!: 12 posts Tony Molloy: 11 posts Gordon Messmer: 10 posts John Doe: 10 posts Mark LaPierre: 9 posts M. Fioretti: 9 posts Ryan Palamara: 9 posts Johan Vermeulen: 8 posts SilverTip257: 8 posts Steve Clark: 8 posts Steve Thompson: 8 posts
show more
Archives