CentOS > centos-virt > December 2009

I have had great luck with nvidia fakeraid on RAID1, but I see there are preferences for software raid. I have very little hands on with full Linux software RAID and that was about 14 years ago. I am ...

Hi all, I have two centos 5.4 servers that I use to run several windows kvm guests (10). All works ok (more or less) but I have a problem with backups. These windows guests are configured to use lvm ...

I need to allocate public IP address to two guest os. I have only 2 network card Interface on server. say eth0 and eth1. I set eth1 a public IP address. so it should in # vi /etc/sysconfig/ifcfg-eth1 ...

Here's the procedure: # qemu-img -f qcow2 /vm/win2k3.img 8G # virt-install --connect qemu:///system -n win2k3 -r 512 --vcpus=1 -c /home/temp/win2003sp2ins.iso -f /vm/win2k3.img -s 4 ...

Hello: I am wondering if KVM is ready for production for running a Windows Server 2003 32 bit guest. According to the RHEL 5.4 virtualization guide, there is supposed to be a virtio-win yum package, ...

I am running CentOS 5.4 (both i386 and x86_64 - different physical machines)... I've been able to get Fedora 11 running as a Xen guest - no trouble. However, I have had no luck with Fedora 12. My ...

Hello, To explore kvm installs via Virt-Manager, I tried win7 installs in 3 different hosts. All 3 have 2G of RAM or more. Windows 7 Ultimate in 2.5 GB DVD ISO 1) Centos 5.4, AMD am2, Athlon 64 x2 ...

Hi, Anyone have that problem xen installation? [root at xen64-dev ~]# virsh autostart appl error: Failed to mark domain appl as autostarted error: internal error sexpr2string failed root at xen64-dev ...

Hi All, I'm using xen 3.0 on CentOS 5 with VLAN. #vconfig add eth0 100 #/etc/xen/script/network-bridge start vifnum=1 netdev=eth0 bridge=xenbr0.100 I know that after xen 3.2 the procedure of bridge ...

Hi All, I have a 5.4 box and testing xen 3.4 on kernel-xen-2.6.18-164.6.1.el5. As you know, there are no enough configuration to do "Suspend to Disk" of the .config of the ...

Hello: According to this list of supported guest on RHEL 5.4 KVM: <http://www.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/5.4/html/Virtuali ...

Hello I have a problem with CentOS 5.4, kvm and libvirt. Although my VM with Windows Server 2k3 supports ACPI the shutdown of the VM does not work. Once a user is logged on, Windows sends an ...

My server have 2 network Interface Cards (NIC). I just found if I create br0 and add both eth0 and eth1 to br0, I'll get errors: eth1: received packet with own address as source address. .. eth0: ...

Hi,Christopher, Thanks, But still I'm a little confused. Actually I don't need host to be a gateway. There're should be gate way's on that IDC center. So the gate way should be add to ...

I have a server that will be hosted in IDC. The Server have 2 network interface card. I would like to set one for host os itself. and the other network interface card as bridge for guest OS. Because ...

I'm deploying my KVM virtualization and I have this question. To get my guest os best performance I would like to install my OS from CD ROM while booting in a saperate disk, say /dev/sda4 then in ...