Search Discussions

71 discussions - 341 posts

  • Hello, I have a requirement to pull 24 atom feeds, process them in the same way via xslt and then write the results to a file location which is slightly different for each feed. This is fairly ...
    Sep 25, 2009 at 10:02 am
    Nov 11, 2009 at 1:47 pm
  • The POJO defined in the following route consumes immediately messages posted on a queue and in consequence is not triggered by the Quartz timer <camel:from ...
    Charles MoulliardCharles Moulliard
    Sep 21, 2009 at 11:47 am
    Sep 21, 2009 at 3:26 pm
  • When doing aggregation, this code is executed before the actual aggregation: /** * Prepares the exchanges for aggregation. * <p/ * This implementation will copy the OUT body to the IN body so when ...
    Sep 1, 2009 at 11:25 pm
    Sep 3, 2009 at 6:02 am
  • Hello, I want to setup the pattern "Dead Letter channel" for handling errors and execption generated in my flow ( camel route). my setup is as follows: <camelContext id="camel" ...
    Sep 30, 2009 at 3:45 pm
    Oct 8, 2009 at 2:03 pm
  • I'm working on Camel 2.0 and spring batch 2.0 (http://static.springsource.org/spring-batch/index.html) integration for a project. I would be happy to share it with anyone interested. -- View this ...
    Sep 3, 2009 at 10:31 pm
    Feb 3, 2010 at 5:59 pm
  • Heya Camel Riders I stumbled upon a problem on having DeadLetterChannel doing the error handling in an staged architecture (all in-VM, non-distributed). Our batch processing application (uses Camel ...
    Bach ChristianBach Christian
    Sep 4, 2009 at 7:05 am
    Sep 8, 2009 at 3:04 pm
  • I am getting errors when trying to send more than one message to a legacy tcp/ip service using a Apache camel mina endpoint. Everything works as expected when requests are send one at a time. Using ...
    Sep 13, 2009 at 4:39 am
    Oct 3, 2009 at 10:26 am
  • firstly, thanks for the gr8 job u guys are doing!!! I m new to camel and I m interested in using Camel as a routing/mediation engine for a set of webservices developed and hosted in glassfish metro ...
    Sep 11, 2009 at 2:41 pm
    Sep 17, 2009 at 11:37 pm
  • Hi, Here is my config: Windows XP SMX4 (fuse esb camel-core on SMX4 (v 2.0.0-M3) I am deploying a very simple route: <c:route <c:from uri="file:C:\toto" / <c:to uri="file:C:\titi" / ...
    Sep 16, 2009 at 4:20 pm
    Sep 17, 2009 at 10:31 am
  • Hey, We are using CXF bean to act as a RESTful endpoint. It seems to work fine when we configure the route as shown below. We post an xml to the url and that gets unmarshalled and sent to the CXF ...
    Sep 10, 2009 at 5:04 pm
    Sep 11, 2009 at 11:12 am
  • Hi all I have just started learning camel and JMS and ActiveMQ, and i am stuck trying to get camel to read messages off ActiveMQ which version of the software? camel version 2.0.0 what platform and ...
    Gareth WilliamsGareth Williams
    Sep 10, 2009 at 3:48 pm
    Sep 11, 2009 at 5:27 am
  • I wanted to use the web console, but cannot find the jar's under http://cwiki.apache.org/CAMEL/web-console.html Even in the Camel 2.o build the console is not included Unfortunately I can't build it ...
    Sep 1, 2009 at 6:41 am
    Sep 18, 2009 at 10:24 am
  • I am having problems to use split and aggregate with custom beans. I have defined two beans: mySplitter and myAggregator, with myAggregator implements the AggregationStrategy. What I'd like to ...
    Sep 1, 2009 at 10:04 pm
    Sep 2, 2009 at 5:30 am
  • Hello I've recently upgraded from CXF 2.2.2 to CXF 2.2.3 and my Camel routes that have CXF clients hang when they want to call web services. The only log message I see is: INFO ...
    S. Ali TokmenS. Ali Tokmen
    Sep 3, 2009 at 9:07 pm
    Nov 13, 2009 at 2:18 pm
  • Hi, As agreed, I'm prefixing the title of this post with "EIP" to denote that it's a general post on Enterprise Integration Patterns (not Camel specific). Message Broker is one of the patterns ...
    Sep 30, 2009 at 7:25 am
    Oct 7, 2009 at 7:32 am
  • Hi, I have the following use case: I have an incoming file in xml. This will be validated, then transformed with xslt, splitted after the transformation and finally the splitted parts will be ...
    Bak AttilaBak Attila
    Sep 17, 2009 at 9:19 am
    Sep 17, 2009 at 10:41 am
  • Hi I have a project which uses MDBs, and I want to try using camel for routing incoming messages to various message handlers, googling showed me ...
    Sep 15, 2009 at 12:53 pm
    Sep 16, 2009 at 6:55 am
  • Hi, I would like to use regular spring bean definition style (<bean tag) rather than the more expressive <camelContext style to define my camel context bean. Is it doable? The reason: - I'd like to ...
    Sep 5, 2009 at 6:57 am
    Sep 8, 2009 at 10:57 pm
  • I'm trying to setup a simple test route so I can start testing some Processors I've written. In spring, I create a very simple context <camelContext id="camel" ...
    Chris AudleyChris Audley
    Sep 5, 2009 at 2:18 am
    Sep 6, 2009 at 1:37 pm
  • I am setting mail_alternateBody header for multipart/alternative and the problem is that now that header shows up in mail envelope. Header is added by custom processor in the route before it comes to ...
    Sep 3, 2009 at 9:40 pm
    Sep 6, 2009 at 12:38 pm
  • Hello, i have developped Camel route to transfrom file to message in queue This is my configuration: <camelContext id="camel" xmlns="http://activemq.apache.org/camel/schema/spring" <route <from ...
    Sep 30, 2009 at 1:42 pm
    Feb 15, 2010 at 6:36 pm
  • HI, URI for Event component is wrong in the site documentation at http://camel.apache.org/event.html The actual URI used is spring-event:default This must be fixed in documentation. Anto
    Anto PaulAnto Paul
    Sep 30, 2009 at 12:59 pm
    Sep 30, 2009 at 1:13 pm
  • Hi, I've been searching for a forum where the patterns from Gregor Hohpe's book are being discussed but I was not able to find one that is dedicated to the subject. I came across Camel which, AFAIU, ...
    Sep 30, 2009 at 6:11 am
    Sep 30, 2009 at 6:53 am
  • Hi, I am trying to register a custom component, which is the right place to register/add a new component programaticaly. Currently doing it in RouteBuilder, but when I use that component in one of ...
    Srivatsa KattaSrivatsa Katta
    Sep 22, 2009 at 8:08 am
    Sep 25, 2009 at 11:44 am
  • I am trying to use pollEnrich to add file to message body as described in http://camel.apache.org/content-enricher.html Here is full example: from("direct:start") .setHeader(Exchange.FILE_NAME, ...
    Dragisa KrsmanovicDragisa Krsmanovic
    Sep 15, 2009 at 6:00 pm
    Sep 16, 2009 at 4:30 pm
  • I get 404 errors trying to download any binaries from http://www.apache.org/dyn/closer.cgi/activemq/apache-camel/2.0.0/apache-camel-2.0.0.tar.gz The source I download from svn doesn't build. The ...
    Sep 15, 2009 at 4:19 pm
    Sep 16, 2009 at 11:53 am
  • Dear reader, I created a custom processor that puts a property map on the header. To check if everything works as planned I created a JUnit test. In this JUnit test I check all the expected headers ...
    Sep 3, 2009 at 6:58 am
    Sep 3, 2009 at 4:39 pm
  • Dear reader, In our routes we need to transform an xml using an xslt. Depending on our header we need a different xsl file to be used for processing. The URI's are given at runtime. Therefor we tried ...
    Sep 3, 2009 at 7:05 am
    Sep 3, 2009 at 8:20 am
  • Hello, I'm trying to develop a route camel who can: Retrieve a value from the header of a message and put this value in an SQL query. Below my configuration: <route <from ...
    Sep 27, 2009 at 5:58 pm
    Sep 30, 2009 at 12:49 pm
  • Hi, First of all, I'm using Camel 1.6.1 and Camel-Mina 1.6.1 and I'm sending/receiving XML over TCP and I'm using a Textline based codec. I've been using the Mina component for a while now but I ...
    Sep 11, 2009 at 11:08 pm
    Sep 12, 2009 at 10:34 am
  • Hi, I develop a unit to detect if an error has been raised during the parsing of a file through Camel-bindy. In this unit test, I don't use a template to produce message as they will be generated by ...
    Charles MoulliardCharles Moulliard
    Sep 11, 2009 at 12:06 pm
    Sep 11, 2009 at 1:22 pm
  • Hi, I'm a little confused. The following unit test was working and since I run it now, Camel (under Windows) generates the following error : Caused by: java.lang.IllegalArgumentException: Only ...
    Charles MoulliardCharles Moulliard
    Sep 11, 2009 at 11:28 am
    Sep 11, 2009 at 11:54 am
  • Hi! I am trying to use the Throttle pattern to satisfy an SLA. The situation is that I must send messages to a provider but I can not send messages faster than a SLA defined rate. The process that ...
    Sep 9, 2009 at 9:09 pm
    Sep 11, 2009 at 1:19 am
  • I need to create a processor that takes a single message and results in two separate messages with unique headers for each message. My plan is to use the headers to dynamically route each result ...
    Chris AudleyChris Audley
    Sep 8, 2009 at 9:09 pm
    Sep 9, 2009 at 1:52 pm
  • I am using camel 1.6.1 and I have simple route, something like below: <camel:route <camel:from uri="direct:send"/ <camel:to uri="velocity:someTemplate.vm" / <camel:to uri="smtp://mail.mycompany.com"/ ...
    Sep 2, 2009 at 11:05 pm
    Sep 3, 2009 at 10:51 pm
  • I am a camel newbie trying to use mina tcp to talk to a legacy system and get response back. Since the host:port for the legacy system to talk varies with each exchange, I am using a beanRef with ...
    Sep 1, 2009 at 4:48 am
    Sep 1, 2009 at 6:05 am
  • Hello, I encountered a problem using the mail component, I have tried to develop a camel route, which transforms a message in an email. Here is my setup: <route <from uri="activemq:queue:SMTP"/ <t ...
    Sep 30, 2009 at 2:09 pm
    Sep 30, 2009 at 2:19 pm
  • Hi, I am trying to use the Camel file component to write to a single file but no matter what I do it always generates multiple files. My conf looks like the following - <route <from ...
    Sep 25, 2009 at 8:09 pm
    Sep 26, 2009 at 11:27 am
  • Hello, I'm trying to developp camel route to filter messages XML format (xpath) This is my configuration: <camelContext id="camel" xmlns="http://activemq.apache.org/camel/schema/spring" <route <from ...
    Sep 23, 2009 at 4:28 pm
    Sep 25, 2009 at 12:33 pm
  • Hello, I'm just a beginner, I'm enthusiasm to make a model based on ActiveMQ and Camel. I try to make a camel route which query the database and put the result into a queue. I have a problem with the ...
    Sep 23, 2009 at 4:05 pm
    Sep 25, 2009 at 12:30 pm
  • Hi, I have defined a route as follows, where in based on the class type of the object returned by the servicebean method I want to try some header. However no matter what, it always sets the header ...
    Sep 21, 2009 at 2:26 pm
    Sep 24, 2009 at 10:00 am
  • Hello, we would like to persist information (the URIs) of the Route the message was sent to. My Route Definition: <camel:camelContext id="camel" <camel:route <camel:from ...
    Sep 23, 2009 at 7:44 am
    Sep 23, 2009 at 1:51 pm
  • Hi, I will implement a bean component who will play the role of a pollingConsumer. This bean will be called every x minutes from a quartz endpoint. This bean component will read all messages posted ...
    Charles MoulliardCharles Moulliard
    Sep 16, 2009 at 8:38 am
    Sep 16, 2009 at 9:36 am
  • Hi, I'm using the wireTap component and when I looked into the code, I saw that it was creating a ScheduledThreadPoolExecutor with 10 threads. It would be useful to control the number of threads ...
    Julien DJulien D
    Sep 15, 2009 at 7:48 am
    Sep 15, 2009 at 8:15 am
  • Hello, I'm trying to use Camel 1.6.1 in SMX (FUSE) and the POJO Producing / Consuming annotations as described in the online documentation. In one class (a CXF-based RESTful webservice), I ...
    Scott ParkersonScott Parkerson
    Sep 14, 2009 at 3:03 pm
    Sep 14, 2009 at 3:30 pm
  • Hi, I am aware of the mock endpoints and test endpoints that can be used to test various routes. I need some advice regarding testing production configurations in my unit test. I use programmatic ...
    Sep 13, 2009 at 2:48 pm
    Sep 14, 2009 at 10:56 am
  • Hi All, I am using Camel1.5 version. I am trying to use a splitter inside the Contest Based Router pattern. Below is my Java DSL route ...
    Sailaja pSailaja p
    Sep 6, 2009 at 11:37 am
    Sep 7, 2009 at 3:08 pm
  • I have a very simple camel route defined, but the riute is not getting created when i deploy my SA and as a result I get "Could not find route for exchange: InOnly" exception DEBUG - ...
    Sep 2, 2009 at 8:55 pm
    Sep 3, 2009 at 3:03 pm
  • Hi All, I'm new to using the Camel and I have a situation: from("jms:xx").filter(header("Autor").in("Joe","George")).to("end:xx"); what is the correct way to change the values into the "in" ...
    Sep 1, 2009 at 5:53 pm
    Sep 2, 2009 at 5:51 pm
  • Hi! I'm using ActiveMQ and Camel to route messages in an application that is deployed in Weblogic 10. THe code is something like this: from("activemq:queue:QueueName").to(someSpringBean); When I try ...
    Sep 30, 2009 at 3:48 pm
    Oct 4, 2009 at 11:20 am
Group Navigation
period‹ prev | Sep 2009 | next ›
Group Overview
groupusers @

70 users for September 2009

Claus Ibsen: 114 posts Willem Jiang: 26 posts Charles Moulliard: 18 posts Snowbug: 14 posts Titexe: 13 posts William Tam: 9 posts Jpcook: 8 posts Chris Audley: 6 posts Tide08: 6 posts Dragisa Krsmanovic: 5 posts HariKrishnan: 5 posts Jamhit: 5 posts Cgveld: 4 posts Gareth Williams: 4 posts Mick Knutson: 4 posts Tnabil: 4 posts Winsks: 4 posts Anto Paul: 3 posts Bak Attila: 3 posts Dulanov: 3 posts
show more