FAQ

Search Discussions

121 discussions - 354 posts

  • Hi All, I am writing my own producer and consumer code, but getting issues when compiling my code. If I refer my cpp files in Makefile.am in the same format as the example code, able to compile my ...
    ManuaManua
    Apr 24, 2009 at 7:46 pm
    Apr 29, 2009 at 12:04 pm
  • In the http://activemq.apache.org/amq-message-store.html documentation for the AMQ Message Store, it mentions that it uses Kaha by default for the reference store. I'm assuming then that there are ...
    Stefan.moserStefan.moser
    Apr 14, 2009 at 8:19 pm
    Apr 21, 2009 at 1:59 pm
  • Hey everyone, It's official ... ActiveMQ-CPP v3.0 now has a release candidate, RC0. The 3.0 code has been in the works awhile and a lot of the code has been rewritten to improve performance and ...
    Timothy BishTimothy Bish
    Apr 20, 2009 at 9:38 pm
    Apr 23, 2009 at 12:33 pm
  • Hello all, I am trying to get an eviction policy as described here: http://activemq.apache.org/slow-consumer-handling.html working for the Queues on my broker, I have attempted several configurations ...
    YesnidYesnid
    Apr 13, 2009 at 6:21 pm
    Apr 14, 2009 at 7:40 pm
  • We are using ActiveMQ quite extensively at Last.fm and are experiencing a number of issues related to the huge load we are putting on it (at peak times up to thousands of messages per second). We are ...
    MassDosageMassDosage
    Apr 2, 2009 at 5:40 pm
    May 5, 2009 at 8:18 pm
  • Hi All, I am trying to send large bytes messages. From the producer end, I ma able to send the messages, but at the consumer end, after recieving some messages, I am getting Segmentation fault ...
    ManuaManua
    Apr 22, 2009 at 2:40 pm
    Apr 29, 2009 at 12:11 pm
  • Hello, I'm trying to implement a method to remove queue which will check if the queue has message on it : if yes I throw an exception else I remove the queue thanks BrokerService.removeDestination ...
    FfrenchmFfrenchm
    Apr 17, 2009 at 4:16 pm
    Apr 21, 2009 at 2:11 pm
  • Hi, We are using AMQ 5.1.0 on some of our servers. We noticed that (on few servers) after a while the AMQ failover transport stops working thus making messages to be not delivered. (from a producer ...
    MdasariMdasari
    Apr 2, 2009 at 4:48 pm
    Apr 6, 2009 at 9:54 am
  • I have been experimenting with the behavior of a network of two AMQ brokers and message selecting consumers. As described in the AMQ documentation ...
    Elliot BarlasElliot Barlas
    Apr 29, 2009 at 5:22 pm
    Jun 9, 2009 at 10:19 pm
  • Hi, Are queued messages supposed to be delivered in order? I have a simple STOMP Perl script below that shows messages delivered out of order. I've run it against AMQ 4.1.1 and 5.2.0 in with both ...
    Roger HooverRoger Hoover
    Apr 28, 2009 at 10:15 pm
    Apr 29, 2009 at 8:40 am
  • any ideas ? -- View this message in context: http://www.nabble.com/How-to-run-a-pluggin-for-only-a-single-queue--tp23200519p23200519.html Sent from the ActiveMQ - User mailing list archive at ...
    DanielRDanielR
    Apr 23, 2009 at 8:30 pm
    Apr 24, 2009 at 9:06 pm
  • Hello, I compared the behaviour of the JMS client (using the ProducerTool and ConsumerTool) and the behaviour of the Stomp client in Java. In both tests I start with 20 messages which I send to the ...
    MjustinMjustin
    Apr 16, 2009 at 9:37 am
    Apr 20, 2009 at 8:28 am
  • I checked all the code in ActiveMQ-CPP 2.2.5 , I think maxInactivityDuration of Wire-Format is not supported in the code. I had want to configure the Parameter to kill some died connections. I do not ...
    PolygraphPolygraph
    Apr 8, 2009 at 7:10 am
    Apr 10, 2009 at 2:26 am
  • Hello, first of all I must say that the bellow test has been realized successfully without Felix. Bellow some log to show you the minimalist configuration of my embedded ActiveMQ. INFO Broker - ...
    FfrenchmFfrenchm
    Apr 8, 2009 at 12:53 pm
    May 28, 2009 at 2:41 pm
  • Is it possible to manage the network connectors of a broker via JMX? I don't see it here: http://activemq.apache.org/jmx.html What I want to be able to do is dynamically manage network connector(s) ...
    RonchalantRonchalant
    Apr 8, 2009 at 5:31 pm
    May 20, 2009 at 11:47 pm
  • I have a queue, I have a producer that sends messages to it, And I have a consumer that synchronously reads messages (by MessageConsumer.receive()) and acknowledges it if message is correct (my own ...
    LiquiddLiquidd
    Apr 13, 2009 at 11:15 am
    Apr 28, 2009 at 1:29 am
  • Hi All, I am trying to transfer image files/continous data streams using ActiveMQ-CPP. I tried to use Bytes Messages but was not successful. Could any obe share a sample code for the same or guide mw ...
    ManuaManua
    Apr 22, 2009 at 3:03 am
    Apr 25, 2009 at 12:26 am
  • I am using AMQ 5.2 embedded broker. Calling activemq.xml from another file. Code is as below : <?xml version="1.0" encoding="UTF-8"? <!DOCTYPE beans PUBLIC "-//SPRING//DTD BEAN//EN" ...
    Raj_NewRaj_New
    Apr 9, 2009 at 7:08 am
    Apr 10, 2009 at 5:41 am
  • Hi all! I'd like to ask for advice about one problem in Stomp protocol that I'd faced. Looks like Stomp protocol have some agreement that messages without 'content-length' header are considered to be ...
    Yury BatrakovYury Batrakov
    Apr 8, 2009 at 10:10 pm
    Apr 9, 2009 at 12:20 pm
  • Hello, I would like to get some details on how can work the flow control through JMS. For example I see there is two methods in the BasicDestination class which are theorically called by the broker ...
    FfrenchmFfrenchm
    Apr 2, 2009 at 8:13 am
    Apr 3, 2009 at 10:59 am
  • I am running ActiveMQ embedded in another application and it seems like it is running correctly but broker.start() never returns which is hanging the startup of my program. In 4.x I didn't have this ...
    VirtualshockVirtualshock
    Apr 2, 2009 at 4:49 pm
    Mar 5, 2010 at 7:21 am
  • I am getting this error using embedded broker of AMQ5.2. Database driver is db2. please suggest me how could I remove this error. I hope their are some configuration enteries that I am missing in ...
    Raj_NewRaj_New
    Apr 27, 2009 at 8:47 am
    Feb 4, 2010 at 3:11 pm
  • Hi there, Does anyone know if it is possible to determine what interface a connection came in on while inside a JAAS plugin? I would like to know if the client has connected from within a local ...
    HuntcHuntc
    Apr 13, 2009 at 7:41 am
    May 19, 2009 at 11:14 am
  • I have already configurated ActiveMQ in Websphere 6.1 as someone described here, but when I re-started websphere, the following error is appeared: ####### error ########## Content: JndiLookupInfo ...
    Websphere and ActiveMQWebsphere and ActiveMQ
    Apr 27, 2009 at 8:10 pm
    May 1, 2009 at 12:40 pm
  • Hi, I have this setup where I set few durable consumers (setMessageListener) and they succesfully register on ActiveMQ. But as soon as the ActiveMQ shutdowns (by whatever the cause is) and is later ...
    AgatoneAgatone
    Apr 28, 2009 at 10:55 am
    Apr 29, 2009 at 11:38 am
  • Hi all, I am planning to use ActiveMQ 5.2.0 in a project and I have made some tests in a windows box to understand how the journal files work. I am defining a Journaled JDBC with postgres for ...
    Diego Rodríguez MartínDiego Rodríguez Martín
    Apr 17, 2009 at 10:44 am
    Apr 29, 2009 at 9:39 am
  • Hello. Has anyone used the 1.1 binaries for NMS and NMS.ActiveMQ from trunk and the failover: protocol? I'm experiencing a lot of slowness and I've found at least one comment (on item in issue ...
    MagellingsMagellings
    Apr 13, 2009 at 10:18 pm
    Apr 24, 2009 at 9:07 pm
  • Hi, I'm using ActiveMQ 5.2.0 Server. I publish a lot of events on a topic, and consume them. At some point, after many messages, I get the message "response from futureResponse was invalid" when I ...
    Stephen PietrowiczStephen Pietrowicz
    Apr 17, 2009 at 9:50 pm
    Apr 24, 2009 at 2:19 pm
  • Please forgive me if this is too stupid a question but, when I connect from my MAC OSX box to my SUN Ultra 2, running IBM MQ Server (With tested queues), I get this: I just run the program "main" ...
    XaosXaos
    Apr 23, 2009 at 12:27 am
    Apr 23, 2009 at 10:00 pm
  • Hello, I've some questions about ActiveMQ and OSGI. As far as I know, there is two activemq jar bundlised : activemq-core and activemq-pool. Is there any others ActiveMQ bundlised jars today ? The ...
    FfrenchmFfrenchm
    Apr 3, 2009 at 8:48 am
    Apr 7, 2009 at 5:15 pm
  • Hello, I'm trying to embed ActiveMQ thanks this method call: broker = BrokerFactory.createBroker(new URI("xbean:file:"+conffile_), false); As far I can understand by setting the boolean startBroker ...
    FfrenchmFfrenchm
    Apr 6, 2009 at 11:28 am
    Apr 7, 2009 at 3:56 pm
  • We would elaborate a distributed broker topography in which brokers can also have "Local queues" e.g non-distributed queues which can actually be used only into a local context. Is it existing a way ...
    L.DaigremontL.Daigremont
    Apr 3, 2009 at 3:22 pm
    Apr 6, 2009 at 8:35 am
  • Hi all! I'm trying to force Ruby and Java code to interoperate between each other by means of ActiveMQ's stomp. I already have a Java classes that send ObjectMessages to each other and want these ...
    Yury BatrakovYury Batrakov
    Apr 1, 2009 at 3:48 pm
    Apr 5, 2009 at 9:25 pm
  • Hi all,I am testing the activemq to learn how to use it. I write a simple single thread jms client to send 10000 messages, but it is blocked at the 5083rd message. I use: activemq 5.2 jvm 1.5 ubuntu ...
    SulongSulong
    Apr 2, 2009 at 9:26 am
    Apr 2, 2009 at 11:16 am
  • I am trying to send a BlobMessage with a file. I was able to get it to work with ftp URL. This seems to send the URL and then use FTP to get the file into the queue where I can then successfully ...
    Lou ParisiLou Parisi
    Apr 16, 2009 at 11:00 pm
    Jun 4, 2010 at 8:43 am
  • Hello, We have a large number (thousands) of durable subscribers that subscribe to a set of topics. These consumers will be connecting/disconnecting frequently, and we must ensure that they receive ...
    Jose LunaJose Luna
    Apr 27, 2009 at 3:19 pm
    May 6, 2009 at 7:12 pm
  • Hi All, in the examples that come with the CMS distribution, I see the following... class SimpleProducer: public Runnable is there a reason why a producer has to inherit from Runnable. The run() ...
    NmittalNmittal
    Apr 30, 2009 at 8:11 pm
    May 1, 2009 at 1:39 pm
  • I need to connect to a SSL secured ActiveMQ broker with .NET. Has SSL support been added to NMS yet? Thanks, Kevin -- View this message in context ...
    KevinlaneKevinlane
    Apr 30, 2009 at 7:31 pm
    Apr 30, 2009 at 8:55 pm
  • Hi, In AMQ 4.1, if a message is persistent, the broker will pass a 'persistent' header with value 'true' when a message is consumed from a queue. This is no longer the case in AMQ 5.2. Is this a bug ...
    Roger HooverRoger Hoover
    Apr 28, 2009 at 5:49 am
    Apr 28, 2009 at 10:03 pm
  • Let's say I have 100,000 stock tickers (or whatever) I want to track, each with a separate client. There seem to be two approaches -- putting them all in one topic and having each of the clients use ...
    Aaron MulderAaron Mulder
    Apr 28, 2009 at 3:05 am
    Apr 28, 2009 at 3:12 pm
  • Sometimes producer cann't send message,and send method wait for there . but server was no unusual,no error info.than my apply will dead,because all request wait for there. restart mq server , than it ...
    Bruce SunBruce Sun
    Apr 24, 2009 at 1:24 am
    Apr 24, 2009 at 7:50 am
  • Hi We've installed our application on Ubuntu Server 8.10; our app uses ActiveMQ 5.2 and was well behaved so far... The Ubuntu environment seems to throw an awful lot of unhelpful messages: Could not ...
    BenoitxBenoitx
    Apr 22, 2009 at 5:38 pm
    Apr 23, 2009 at 12:24 pm
  • Hi, we just switched over from a JDBC-based failover configuration to a network of brokers and now have the following situation: 1. we have two active brokers (that's fine). 2. we have MDBs that ...
    Roland Thomas LichtiRoland Thomas Lichti
    Apr 21, 2009 at 10:05 am
    Apr 22, 2009 at 6:54 am
  • I am trying to find out if the openwire protocol when sending messages that have byte arrays ensures language and platform independence? If it does not then do any other transport protocols ensure ...
    JamesstJamesst
    Apr 21, 2009 at 6:02 pm
    Apr 21, 2009 at 8:02 pm
  • Hi All, I want to sent blob messages in request response fashion. My client will send the request and server will respond back with the continous data streams/blob messages (images). I am new to this ...
    ManuaManua
    Apr 21, 2009 at 2:09 pm
    Apr 21, 2009 at 2:15 pm
  • I have enabled username and password for the engine and it works as it should, except for the admin app.. If I try to choose a specifi queue to look at, I get the following exception..: HTTP ERROR ...
    Bjørn T JohansenBjørn T Johansen
    Apr 20, 2009 at 2:08 pm
    Apr 21, 2009 at 6:22 am
  • Hi everybody I continue previous thread which describes how to use Advisory package and ConsumerEventSource.setConsumerListener. I will be in a network of brokers configuration where consumers are ...
    Eric-AWLEric-AWL
    Apr 20, 2009 at 9:02 am
    Apr 20, 2009 at 9:37 am
  • I have setup a transactional message listener in Spring, using ActiveMQ and Atomikos for JTA. ActiveMQ uses MySQL for persistency, no journaling is done. I noticed that the ID field in the ...
    Rik GruwezRik Gruwez
    Apr 7, 2009 at 1:47 pm
    Apr 17, 2009 at 11:14 am
  • Hello All, According to the following page: http://activemq.apache.org/failover-transport-reference.html the timeout transport option is availible in ActiveMQ Version 5.3? is this correct? If so when ...
    YesnidYesnid
    Apr 14, 2009 at 11:38 pm
    Apr 15, 2009 at 12:21 am
  • Currently I am using activemq without the activemq.xml config file. I would like to use the lastImageSubscriptionRecoveryPolicy feature with my retroactive subscription without using the ...
    DarrickcDarrickc
    Apr 6, 2009 at 7:39 pm
    Apr 10, 2009 at 8:21 pm
Group Navigation
period‹ prev | Apr 2009 | next ›
Group Overview
groupusers @
categoriesactivemq
discussions121
posts354
users109
websiteactivemq.apache.org

109 users for April 2009

Timothy Bish: 33 posts Dejan Bosanac: 19 posts Gary Tully: 16 posts Ffrenchm: 14 posts Manua: 13 posts Andreas Gies: 11 posts Magellings: 10 posts Nmittal: 10 posts Andreas Gies: 9 posts Dave Stanley: 8 posts Bruce Snyder: 7 posts Yesnid: 7 posts Yury Batrakov: 7 posts Jbekas: 6 posts Liquidd: 6 posts Raj_New: 6 posts Roger Hoover: 6 posts Stefan.moser: 6 posts Mjustin: 5 posts Diego Rodríguez Martín: 4 posts
show more
Archives