Steve Hay (ste...@planit.com)

Automated smoke report for 5.11.0 patch 34896
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz) (x86/2 cpu)
    on        MSWin32 - WinXP/.Net SP3
    using     bcc32 version 5.5.1
    smoketime 5 hours 35 minutes (average 16 minutes 47 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

34896 Configuration (common) -DCCTYPE=BORLAND -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
----------- ---------------------------------------------------------
F F         
F F         -Dusemymalloc
F F         -Duselargefiles
F F         -Duselargefiles -Dusemymalloc
F F         -Duseithreads -Uuseimpsys
F F         -Duseithreads -Uuseimpsys -Dusemymalloc
F F         -Duseithreads -Uuseimpsys -Duselargefiles
F F         -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
F F         -Duseithreads
F F         -Duseithreads -Duselargefiles
| +--------- -DDEBUGGING
+----------- no debugging


Locally applied patches:
    DEVEL
    SMOKE34896

Failures: (common-args) -DCCTYPE=BORLAND -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
[default]
[default] -DDEBUGGING
[default] -Dusemymalloc
[default] -DDEBUGGING -Dusemymalloc
[default] -Duselargefiles
[default] -DDEBUGGING -Duselargefiles
[default] -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duselargefiles -Dusemymalloc
[default] -Duseithreads -Uuseimpsys
[default] -DDEBUGGING -Duseithreads -Uuseimpsys
[default] -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -Duseithreads -Uuseimpsys -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Duselargefiles
[default] -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
[default] -Duseithreads
[default] -DDEBUGGING -Duseithreads
[default] -DDEBUGGING -Duseithreads -Duselargefiles
../ext/B/t/deparse.t........................................FAILED
    63, 65
../ext/PerlIO/t/ioleaks.t...................................FAILED
../lib/Attribute/Handlers/t/linerep.t.......................FAILED

[default] -Duseithreads -Duselargefiles
../ext/B/t/deparse.t........................................FAILED
    63, 65
../ext/IO/t/io_sock.t.......................................FAILED
../ext/PerlIO/t/ioleaks.t...................................FAILED
../lib/Attribute/Handlers/t/linerep.t.......................FAILED

Compiler messages(bcc32):
Warning W8008 crc32.c 232: Condition is always true in function crc32
Warning W8066 crc32.c 242: Unreachable code in function crc32
Warning W8004 deflate.c 351: 'hash_head' is assigned a value that is never used in function deflateSetDictionary
Warning W8008 deflate.c 1278: Condition is always false in function fill_window
Warning W8066 deflate.c 1279: Unreachable code in function fill_window
Warning W8004 deflate.c 1669: 'bflush' is assigned a value that is never used in function deflate_slow

Automated smoke report for 5.11.0 patch 34896
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz) (x86/2 cpu)
    on        MSWin32 - WinXP/.Net SP3
    using     cl version 15.00.21022.08
    smoketime 5 hours 46 minutes (average 17 minutes 20 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

34896 Configuration (common) -DCCTYPE=MSVC90 -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
----------- ---------------------------------------------------------
F F         
F F         -Dusemymalloc
F F         -Duselargefiles
F F         -Duselargefiles -Dusemymalloc
F F         -Duseithreads -Uuseimpsys
F F         -Duseithreads -Uuseimpsys -Dusemymalloc
F F         -Duseithreads -Uuseimpsys -Duselargefiles
F F         -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
F F         -Duseithreads
F F         -Duseithreads -Duselargefiles
| +--------- -DDEBUGGING
+----------- no debugging


Locally applied patches:
    DEVEL
    SMOKE34896

Failures: (common-args) -DCCTYPE=MSVC90 -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
[default]
[default] -DDEBUGGING
[default] -Dusemymalloc
[default] -DDEBUGGING -Dusemymalloc
[default] -Duselargefiles
[default] -DDEBUGGING -Duselargefiles
[default] -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duselargefiles -Dusemymalloc
[default] -Duseithreads -Uuseimpsys
[default] -DDEBUGGING -Duseithreads -Uuseimpsys
[default] -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -Duseithreads -Uuseimpsys -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Duselargefiles
[default] -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
[default] -Duseithreads
[default] -DDEBUGGING -Duseithreads
[default] -Duseithreads -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Duselargefiles
../ext/B/t/deparse.t........................................FAILED
    63, 65
../ext/PerlIO/t/ioleaks.t...................................FAILED
../lib/Attribute/Handlers/t/linerep.t.......................FAILED

Compiler messages(MSWin32):
Cwd.xs(77) : warning C4101: 'symlink' : unreferenced local variable

Automated smoke report for 5.11.0 patch 34896
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz) (x86/2 cpu)
    on        MSWin32 - WinXP/.Net SP3
    using     cl version 14.00.50727.762
    smoketime 5 hours 46 minutes (average 17 minutes 18 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

34896 Configuration (common) -DCCTYPE=MSVC80 -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
----------- ---------------------------------------------------------
F F         
F F         -Dusemymalloc
F F         -Duselargefiles
F F         -Duselargefiles -Dusemymalloc
F F         -Duseithreads -Uuseimpsys
F F         -Duseithreads -Uuseimpsys -Dusemymalloc
F F         -Duseithreads -Uuseimpsys -Duselargefiles
F F         -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
F F         -Duseithreads
F F         -Duseithreads -Duselargefiles
| +--------- -DDEBUGGING
+----------- no debugging


Locally applied patches:
    DEVEL
    SMOKE34896

Failures: (common-args) -DCCTYPE=MSVC80 -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
[default]
[default] -DDEBUGGING
[default] -Dusemymalloc
[default] -DDEBUGGING -Dusemymalloc
[default] -DDEBUGGING -Duselargefiles
[default] -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duselargefiles -Dusemymalloc
[default] -Duseithreads -Uuseimpsys
[default] -DDEBUGGING -Duseithreads -Uuseimpsys
[default] -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -Duseithreads -Uuseimpsys -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Duselargefiles
[default] -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
[default] -Duseithreads
[default] -DDEBUGGING -Duseithreads
[default] -Duseithreads -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Duselargefiles
../ext/B/t/deparse.t........................................FAILED
    63, 65
../ext/PerlIO/t/ioleaks.t...................................FAILED
../lib/Attribute/Handlers/t/linerep.t.......................FAILED

[default] -Duselargefiles
op/rand.t...................................................FAILED
    5
../ext/B/t/deparse.t........................................FAILED
    63, 65
../ext/PerlIO/t/ioleaks.t...................................FAILED
../lib/Attribute/Handlers/t/linerep.t.......................FAILED

Compiler messages(MSWin32):
Cwd.xs(77) : warning C4101: 'symlink' : unreferenced local variable

Automated smoke report for 5.11.0 patch 34887
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz) (x86/2 cpu)
    on        MSWin32 - WinXP/.Net SP3
    using     cl version 13.10.3077
    smoketime 5 hours 33 minutes (average 16 minutes 40 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

34887 Configuration (common) -DCCTYPE=MSVC70FREE -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
----------- ---------------------------------------------------------
F F         
F F         -Dusemymalloc
F F         -Duselargefiles
F F         -Duselargefiles -Dusemymalloc
F F         -Duseithreads -Uuseimpsys
F F         -Duseithreads -Uuseimpsys -Dusemymalloc
F F         -Duseithreads -Uuseimpsys -Duselargefiles
F F         -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
F F         -Duseithreads
F F         -Duseithreads -Duselargefiles
| +--------- -DDEBUGGING
+----------- no debugging


Locally applied patches:
    DEVEL
    SMOKE34887

Failures: (common-args) -DCCTYPE=MSVC70FREE -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
[default]
[default] -DDEBUGGING
[default] -Dusemymalloc
[default] -DDEBUGGING -Dusemymalloc
[default] -Duselargefiles
[default] -DDEBUGGING -Duselargefiles
[default] -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duselargefiles -Dusemymalloc
[default] -Duseithreads -Uuseimpsys
[default] -DDEBUGGING -Duseithreads -Uuseimpsys
[default] -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -Duseithreads -Uuseimpsys -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Duselargefiles
[default] -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
[default] -Duseithreads
[default] -DDEBUGGING -Duseithreads
[default] -Duseithreads -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Duselargefiles
../ext/B/t/deparse.t........................................FAILED
    63, 65
../ext/PerlIO/t/ioleaks.t...................................FAILED
../lib/Attribute/Handlers/t/linerep.t.......................FAILED

Compiler messages(MSWin32):
Cwd.xs(77) : warning C4101: 'symlink' : unreferenced local variable

Automated smoke report for 5.11.0 patch 34887
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz) (x86/2 cpu)
    on        MSWin32 - WinXP/.Net SP3
    using     cl version 12.00.8804
    smoketime 4 hours 18 minutes (average 12 minutes 56 seconds)

Summary: FAIL(Ft)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

   34887     Configuration (common) -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
----------- ---------------------------------------------------------
F F         
F F         -Dusemymalloc
F F         -Duseithreads -Uuseimpsys
F F         -Duseithreads -Uuseimpsys -Dusemymalloc
F F         -Duseithreads
F t         -Accflags='-DPERL_OLD_COPY_ON_WRITE'
F t         -Accflags='-DPERL_OLD_COPY_ON_WRITE' -Dusemymalloc
F t         -Accflags='-DPERL_OLD_COPY_ON_WRITE' -Duseithreads -Uuseimpsys
F t -Accflags='-DPERL_OLD_COPY_ON_WRITE' -Duseithreads -Uuseimpsys -Dusemymalloc
F t         -Accflags='-DPERL_OLD_COPY_ON_WRITE' -Duseithreads
| +--------- -DDEBUGGING
+----------- no debugging


Locally applied patches:
    DEVEL
    SMOKE34887

Failures: (common-args) -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
[default]
[default] -DDEBUGGING
[default] -Dusemymalloc
[default] -DDEBUGGING -Dusemymalloc
[default] -Duseithreads -Uuseimpsys
[default] -DDEBUGGING -Duseithreads -Uuseimpsys
[default] -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -Duseithreads
[default] -DDEBUGGING -Duseithreads
../ext/B/t/deparse.t........................................FAILED
    63, 65
../ext/PerlIO/t/ioleaks.t...................................FAILED
../lib/Attribute/Handlers/t/linerep.t.......................FAILED

[default] -Accflags='-DPERL_OLD_COPY_ON_WRITE'
[default] -Accflags='-DPERL_OLD_COPY_ON_WRITE' -Dusemymalloc
[default] -Accflags='-DPERL_OLD_COPY_ON_WRITE' -Duseithreads -Uuseimpsys
[default] -Accflags='-DPERL_OLD_COPY_ON_WRITE' -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -Accflags='-DPERL_OLD_COPY_ON_WRITE' -Duseithreads
../ext/B/t/deparse.t........................................FAILED
    63, 65
../ext/Compress/Raw/Zlib/t/07bufsize.t......................FAILED
    Bad plan.  You planned 288 tests but ran 41.
../ext/PerlIO/t/ioleaks.t...................................FAILED
../lib/Attribute/Handlers/t/linerep.t.......................FAILED

Compiler messages(MSWin32):
Cwd.xs(77) : warning C4101: 'symlink' : unreferenced local variable

Yes, I think so:

C:\p5p\bleadperl>.\perl -MPOSIX -e "POSIX::O_NONBLOCK()"
Your vendor has not defined Fcntl macro O_NONBLOCK, used at -e line 1.

C:\p5p\bleadperl>.\perl -MPOSIX -e "POSIX::O_SYNC()"
O_SYNC is not a valid POSIX macro at -e line 1


> If "yes" - can you suggest two Fcntl constants re-exported by POSIX
> that are defined on Win32?

These are all okay: O_APPEND, O_CREAT, O_EXCL, O_TRUNC.

Only one of those (deparse.t) actually failed. The other two are TODO
passed. Why do they show up as FAILED? The mktest.out file contains the
same FAILED lines as the mktest.rpt above, but the full log file output
clearly says "TODO passed":

Test Summary Report
-------------------
../ext/B/t/deparse                                           (Wstat: 512
Tests: 74 Failed: 2)
  Failed tests:  63, 65
  Non-zero exit status: 2
../ext/PerlIO/t/ioleaks                                      (Wstat: 0
Tests: 12 Failed: 0)
  TODO passed:   1, 4, 7-12
../lib/Attribute/Handlers/t/linerep                          (Wstat: 0
Tests: 18 Failed: 0)
  TODO passed:   16
Files=1584, Tests=211339, 767 wallclock secs (27.34 usr +  2.56 sys =
29.91 CPU)
Result: FAIL
Failed 1/1584 test programs. 2/211339 subtests failed.
NMAKE : fatal error U1077: '..\perl.exe' : return code '0xff'
Stop.

The deparse.t failures were:

not ok 63 - tests for deparsing imported constants
#   Failed test 'tests for deparsing imported constants'
#   at ../ext/B/t/deparse.t line 94.
#                   '{
#     warn &O_NONBLOCK();
# }'
#     doesn't match '(?-xism:^\{\s*\s+warn\s+O_NONBLOCK\;\s*\}$)'

not ok 65 - tests for deparsing imported constants that got deleted from
the original namespace
#   Failed test 'tests for deparsing imported constants that got deleted
from the original namespace'
#   at ../ext/B/t/deparse.t line 94.
#                   '{
#     warn &O_SYNC();
# }'
#     doesn't match '(?-xism:^\{\s*\s+warn\s+O_SYNC\;\s*\}$)'

Automated smoke report for 5.11.0 patch 34874
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz) (x86/2 cpu)
    on        MSWin32 - WinXP/.Net SP3
    using     cl version 12.00.8804
    smoketime 5 hours 16 minutes (average 15 minutes 50 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

   34874     Configuration (common) -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
----------- ---------------------------------------------------------
F F         
F F         -Dusemymalloc
F F         -Duselargefiles
F F         -Duselargefiles -Dusemymalloc
F F         -Duseithreads -Uuseimpsys
F F         -Duseithreads -Uuseimpsys -Dusemymalloc
F F         -Duseithreads -Uuseimpsys -Duselargefiles
F F         -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
F F         -Duseithreads
F F         -Duseithreads -Duselargefiles
| +--------- -DDEBUGGING
+----------- no debugging


Locally applied patches:
    DEVEL
    SMOKE34874

Failures: (common-args) -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
[default]
[default] -DDEBUGGING
[default] -Dusemymalloc
[default] -DDEBUGGING -Dusemymalloc
[default] -Duselargefiles
[default] -DDEBUGGING -Duselargefiles
[default] -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duselargefiles -Dusemymalloc
[default] -Duseithreads -Uuseimpsys
[default] -DDEBUGGING -Duseithreads -Uuseimpsys
[default] -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -Duseithreads -Uuseimpsys -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Duselargefiles
[default] -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
[default] -Duseithreads
[default] -DDEBUGGING -Duseithreads
[default] -Duseithreads -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Duselargefiles
../ext/B/t/deparse.t........................................FAILED
    63, 65
../ext/PerlIO/t/ioleaks.t...................................FAILED
../lib/Attribute/Handlers/t/linerep.t.......................FAILED

Compiler messages(MSWin32):
Cwd.xs(77) : warning C4101: 'symlink' : unreferenced local variable

Automated smoke report for 5.11.0 patch 34857
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz) (x86/2 cpu)
    on        MSWin32 - WinXP/.Net SP3
    using     gcc version 3.4.2
    smoketime 5 hours 43 minutes (average 17 minutes 12 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

   34857     Configuration (common) -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
----------- ---------------------------------------------------------
F F         
F F         -Dusemymalloc
F F         -Duselargefiles
F F         -Duselargefiles -Dusemymalloc
F F         -Duseithreads -Uuseimpsys
F F         -Duseithreads -Uuseimpsys -Dusemymalloc
F F         -Duseithreads -Uuseimpsys -Duselargefiles
F F         -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
F F         -Duseithreads
F F         -Duseithreads -Duselargefiles
| +--------- -DDEBUGGING
+----------- no debugging


Locally applied patches:
    DEVEL
    SMOKE34857

Failures: (common-args) -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
[default]
[default] -DDEBUGGING
[default] -Dusemymalloc
[default] -DDEBUGGING -Dusemymalloc
[default] -Duselargefiles
[default] -DDEBUGGING -Duselargefiles
[default] -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duselargefiles -Dusemymalloc
../ext/B/t/deparse.t........................................FAILED
    63, 65
../ext/PerlIO/t/ioleaks.t...................................FAILED

[default] -Duseithreads -Uuseimpsys
[default] -DDEBUGGING -Duseithreads -Uuseimpsys
[default] -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -Duseithreads -Uuseimpsys -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Duselargefiles
[default] -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
[default] -Duseithreads
[default] -DDEBUGGING -Duseithreads
[default] -Duseithreads -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Duselargefiles
../ext/B/t/deparse.t........................................FAILED
    61, 63, 65-66
../ext/PerlIO/t/ioleaks.t...................................FAILED

Compiler messages(gcc):
perlhost.h: In function `CPerlHost* IPerlMem2Host(IPerlMem*)':
perlhost.h:247: warning: invalid access to non-static data member `CPerlHost::m_hostperlMem' of NULL object
perlhost.h:247: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlMemShared2Host(IPerlMem*)':
perlhost.h:252: warning: invalid access to non-static data member `CPerlHost::m_hostperlMemShared' of NULL object
perlhost.h:252: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlMemParse2Host(IPerlMem*)':
perlhost.h:257: warning: invalid access to non-static data member `CPerlHost::m_hostperlMemParse' of NULL object
perlhost.h:257: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlEnv2Host(IPerlEnv*)':
perlhost.h:262: warning: invalid access to non-static data member `CPerlHost::m_hostperlEnv' of NULL object
perlhost.h:262: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlStdIO2Host(IPerlStdIO*)':
perlhost.h:267: warning: invalid access to non-static data member `CPerlHost::m_hostperlStdIO' of NULL object
perlhost.h:267: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlLIO2Host(IPerlLIO*)':
perlhost.h:272: warning: invalid access to non-static data member `CPerlHost::m_hostperlLIO' of NULL object
perlhost.h:272: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlDir2Host(IPerlDir*)':
perlhost.h:277: warning: invalid access to non-static data member `CPerlHost::m_hostperlDir' of NULL object
perlhost.h:277: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlSock2Host(IPerlSock*)':
perlhost.h:282: warning: invalid access to non-static data member `CPerlHost::m_hostperlSock' of NULL object
perlhost.h:282: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlProc2Host(IPerlProc*)':
perlhost.h:287: warning: invalid access to non-static data member `CPerlHost::m_hostperlProc' of NULL object
perlhost.h:287: warning: (perhaps the `offsetof' macro was used incorrectly)

Automated smoke report for 5.11.0 patch 34836
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz) (x86/2 cpu)
    on        MSWin32 - WinXP/.Net SP3
    using     cl version 15.00.21022.08
    smoketime 5 hours 48 minutes (average 17 minutes 27 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

34836 Configuration (common) -DCCTYPE=MSVC90 -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
----------- ---------------------------------------------------------
O O         
O O         -Dusemymalloc
O O         -Duselargefiles
O O         -Duselargefiles -Dusemymalloc
O O         -Duseithreads -Uuseimpsys
O O         -Duseithreads -Uuseimpsys -Dusemymalloc
O O         -Duseithreads -Uuseimpsys -Duselargefiles
O O         -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
O O         -Duseithreads
F O         -Duseithreads -Duselargefiles
| +--------- -DDEBUGGING
+----------- no debugging


Locally applied patches:
    DEVEL
    SMOKE34836

Failures: (common-args) -DCCTYPE=MSVC90 -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
[default] -Duseithreads -Duselargefiles
../ext/IO/t/io_sock.t.......................................FAILED
../ext/PerlIO/t/ioleaks.t...................................FAILED

Compiler messages(MSWin32):
Cwd.xs(77) : warning C4101: 'symlink' : unreferenced local variable

Automated smoke report for 5.11.0 patch 34815
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz) (x86/2 cpu)
    on        MSWin32 - WinXP/.Net SP3
    using     cl version 12.00.8804
    smoketime 4 hours 15 minutes (average 12 minutes 46 seconds)

Summary: FAIL(Ft)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

   34815     Configuration (common) -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
----------- ---------------------------------------------------------
O O         
O O         -Dusemymalloc
O O         -Duseithreads -Uuseimpsys
O O         -Duseithreads -Uuseimpsys -Dusemymalloc
O O         -Duseithreads
F t         -Accflags='-DPERL_OLD_COPY_ON_WRITE'
F t         -Accflags='-DPERL_OLD_COPY_ON_WRITE' -Dusemymalloc
F t         -Accflags='-DPERL_OLD_COPY_ON_WRITE' -Duseithreads -Uuseimpsys
F t -Accflags='-DPERL_OLD_COPY_ON_WRITE' -Duseithreads -Uuseimpsys -Dusemymalloc
F t         -Accflags='-DPERL_OLD_COPY_ON_WRITE' -Duseithreads
| +--------- -DDEBUGGING
+----------- no debugging


Locally applied patches:
    DEVEL
    SMOKE34815